Search found 50 matches
- 27 Mar 2013 18:23
- Forum: mikroC PRO for ARM General
- Topic: STM32F4-DISCOVERY
- Replies: 13
- Views: 11186
Re: STM32F4-DISCOVERY
UDP problem solved, but the ADC still exists. If i use both ADCs together the reading will be another value. So i use only 1 ADC and using a separate comparator for the other and used as Digital. Udp is very simple compared to other ones. Very fast and reliable. I will publish the project after the ...
- 15 Mar 2013 14:38
- Forum: mikroC PRO for ARM General
- Topic: ADC resolution in STM32
- Replies: 6
- Views: 4934
Re: ADC resolution in STM32
This is the code, i commented out the second ADC function (Light). There is another problem, the value read form LM35 is not original, when i measure it with a multimeter it gives about less than 300 mv, but STM32 ADC gives 400mv. I hope this is because the above mentioned problem. /****************...
- 13 Mar 2013 17:20
- Forum: mikroC PRO for ARM General
- Topic: ADC resolution in STM32
- Replies: 6
- Views: 4934
Re: ADC resolution in STM32
Hello, I have a problem.
On STM32F4 When I use ADC1 channel 3 with any other ADC1 together the voltage level on the other ADC1 affect of the channel 3 ADC reading. I used both ADC_Read(xx) and ADC_Get_Sample(xx) function, both gives same result!!. If i use only one ADC (channel 3) there is no problem.
On STM32F4 When I use ADC1 channel 3 with any other ADC1 together the voltage level on the other ADC1 affect of the channel 3 ADC reading. I used both ADC_Read(xx) and ADC_Get_Sample(xx) function, both gives same result!!. If i use only one ADC (channel 3) there is no problem.
- 28 Feb 2013 16:19
- Forum: mikroC PRO for ARM General
- Topic: STM32F4-DISCOVERY
- Replies: 13
- Views: 11186
Re: STM32F4-DISCOVERY
Thanks, I got it working, some initialization problem. We need an additional initialization for output pins are shown below. This alone wont work sfr sbit SPI_Ethernet_Rst at GPIOB_ODR.B7; sfr sbit SPI_Ethernet_CS at GPIOB_ODR.B8; sfr sbit SPI_Ethernet_Rst_Direction at GPIOB_ODR.B7; sfr sbit SPI_Eth...
- 14 Feb 2013 15:52
- Forum: mikroC PRO for ARM General
- Topic: STm32F4 USB HID
- Replies: 4
- Views: 5734
STm32F4 USB HID
I tried the example provided for easy_mxpro_v7 STM32 on STM32F4 Discovery, but when i connect the board to PC, it shows driver problem. MY os is windows 7, i hope HID device should be detected correct automatically. What may be the problem? I attached 2 examples here
- 10 Feb 2013 15:45
- Forum: mikroC PRO for PIC General
- Topic: Ethernet connection problem
- Replies: 15
- Views: 11065
Re: Ethernet connection problem
My web server is accessible only from my LAN, it cannot be accessed from outside word. Any idea to make it possible? I use dynamic IP.
- 09 Feb 2013 16:56
- Forum: mikroC PRO for dsPIC30/33 and PIC24 General
- Topic: PIC 16F877A ENC28j60 Problem
- Replies: 4
- Views: 3654
Re: PIC 16F877A ENC28j60 Problem
Finally it works after 8 hours of effort. But the web server is accessible only from my LAN, it cannot be accessed from outside word. Any idea to make it possible? I use dynamic IP.
- 09 Feb 2013 16:53
- Forum: mikroC PRO for PIC General
- Topic: ENC28J60 And 16F877A
- Replies: 4
- Views: 2373
Re: ENC28J60 And 16F877A
I tried the example and works fine. But it works only inside my local LAN, how can i make it accessible from outside world ?
- 09 Feb 2013 08:44
- Forum: mikroC PRO for dsPIC30/33 and PIC24 General
- Topic: PIC 16F877A ENC28j60 Problem
- Replies: 4
- Views: 3654
PIC 16F877A ENC28j60 Problem
Hello,
I tried this code from LIBSTOCK, I ddnt get ping reply, and nothings is happening.
The LED on ENC28J60 blinks always. My PC Network shows Undefined network.
I tried this code from LIBSTOCK, I ddnt get ping reply, and nothings is happening.
The LED on ENC28J60 blinks always. My PC Network shows Undefined network.
- 05 Feb 2013 14:23
- Forum: mikroC PRO for ARM General
- Topic: STM32F4-DISCOVERY
- Replies: 13
- Views: 11186
Re: STM32F4-DISCOVERY
I dont mean to write codes, i just mean weather ENC28J60 and SD can be connected to same SPI, I dont know which is usable SPI on the board as there is other peripherals on the board and is there any alternate function settings to use SPI ethernet? As your library example is not for STM32.
- 05 Feb 2013 12:54
- Forum: mikroC PRO for ARM General
- Topic: STM32F4-DISCOVERY
- Replies: 13
- Views: 11186
Re: STM32F4-DISCOVERY
Thank you,
How can i use both ENC28j60 and SD card with STM32F4 Discovery? I am planing to set up a web server. Which SPIs are free to use in the discovery board? How is the configuration settings an initialization (Alternate Function Register)
How can i use both ENC28j60 and SD card with STM32F4 Discovery? I am planing to set up a web server. Which SPIs are free to use in the discovery board? How is the configuration settings an initialization (Alternate Function Register)
- 05 Feb 2013 03:04
- Forum: mikroC PRO for ARM General
- Topic: STM32F4-DISCOVERY
- Replies: 13
- Views: 11186
Re: STM32F4-DISCOVERY
If i use PLLN=168 i get double duration delay, please check the above uploaded setting.
- 03 Feb 2013 07:26
- Forum: mikroC PRO for ARM General
- Topic: STM32F4-DISCOVERY
- Replies: 13
- Views: 11186
Re: STM32F4-DISCOVERY
Both of the above problem is solved Problem 1: Project settings was not correct ( i have uploaded the correct settings here of 168Mhz) Problem 2: Reinstalled MikroC and solved the problem. How can i check the operating frequency of the MCU ? I think there is a slight difference in 1 second delay, p...
- 02 Feb 2013 03:18
- Forum: mikroC PRO for PIC General
- Topic: Call Signature doesn't match function definition signature?
- Replies: 3
- Views: 1771
Re: Call Signature doesn't match function definition signatu
I have the same problem with STM32F4, posted here
http://www.mikroe.com/forum/viewtopic.php?f=178&t=52700
http://www.mikroe.com/forum/viewtopic.php?f=178&t=52700
- 01 Feb 2013 17:19
- Forum: mikroC PRO for ARM General
- Topic: STM32F4-DISCOVERY
- Replies: 13
- Views: 11186
Re: STM32F4-DISCOVERY
Now Every time i compile i get an error, see the pic