Hi,

your MikroC AI for PIC compilers do support the PIC18F57Q43 : will you soon upgrade your other compiler MikroBasic PRO for PIC and also support the same PIC18F57Q43 ?

thank you !

Marc

Hi, i finally found that any board carrying the MSP432 could fit with my need for bootloading ... any choice from the popup menu will work, even on the mini wich does not show in the available list... so it's ok now...

Dear Filip, this is the procedure i have followed as usually ... reset + connect within 5 seconds. The microcontroler DOES connect to the mikroBootloader. Then , when clicking "Browse for HEX" , the terminal says "select device first". Then, i cannot find my MINI-M4 for MSP432 in the list proposed b...

hi Stefan,
as suggested, i triel with the MikroElektronika Bootloader embedded with the MikroBasic PRO for ARM V6.2.0 compiler suite but ... same event happens ( MINI-M4 for MSP432 is not listed in the range of CPUs) ...

A new bug for your team ?... (sorry for that)

Regards,

Marc

Hi Stefa, please find attached the required screenshot : yes, i can see the "gggg..." the question was concerning the impossible connexion between the MINI-M4 for MSP432 and the bootloader fitted to the product ( dowloaded from https://www.mikroe.com/mini-msp432 webpage ) ; i also inluded the screen...

Hi, i am trying to program one brand new (nerver flashed) MINI-M4 for MSP using the mikroBootloader V2.4.2.0 downloaded from ME website describing the Mini-M4. The MikroBootlader does not show the Mini-M4 in the available MCUs that can be selected using the upper textbox. ( even after correct select...

sorry for my last question : i just mistook the PWM module outputs (which can be used to generate ordinary PWM signals) with the POWER PWM Outputs of the PIC (which are to be used for motor control). The first are on Port C and operate well with the PWM_Library , the second are on port B and should ...

Hello, i am using mikroBasic PRO for PIC , last version 7.6 , one PIC18F2431 clocked 8MHz (INTOSC), and my PWM does not work. My code: 1) PIN definitions: dim PINRB0 as sbit at LATB0_bit PINRB0_Direction as sbit at TRISB0_bit PINRB1 as sbit at LATB1_bit PINRB1_Direction as sbit at TRISB1_bit PINRB2 ...

Thank you very much Janni for these brilliant explanations : how did you discover all these tricks ?

i tested them into my code and the remapping variables (pin names) are now well recognized by the compiler. My compilation works well : very good news.

Hi MikroE forum team ! sorry to interfere in this mikroPascal for PIC discussion but ... i am experiencing exactly the same kind of problem using the mikroBasic Pro for PIC (last version V7.6) when trying to remap TX pins of my PIC16F15324. My code: Unlock_IOLOCK() PPS_Mapping_NoLock(5, _INPUT, _RX1...

hello, i am developing with MIKROE excellent tools, typically MINI-32 and its native MIKROE BOOTLOADER. I observed that changing project configuration settings could destroy the MIKROE bootloader. In this case, the only way to recover the bootloader OK is to program it again using an external progra...

hi, already had the same problem and had to reprogram the bootloader using external programmer.

is there any way to flash a program without erasing the bootloader (config option or whatever...)?

thank you,

regards.

Hi, I currently work with CadSoft EAGLE PCB design software, and would greatly appreciate to find on your website a downloadable library component for MINI-32 board. This would help integrating MINI-32 as a component into my projects. Thank you for having done it for your CLICKER boards... kindest r...

good morning everybody , sorry to inform community i experience same proble on my ACER ASPIRE 7750G (Windows 8, INTEL Core i5 64 bits). Symptom = When pluging in the USB cable connected to my lovely "MikroMedia for PIC32" board, the windop popup "unrecognised peripheral" appears for a couple of seco...

I would enjoy trying to put one PIC 32 to sleep and use the internal RTC to wake it up at a given date and hour.

If anyone tried this in the past, please tell me how to ? ...