Hi Marina thanks for the reply. For those who interested and have a PICPLCv6 board And a stand alone mikrProg programmer, I have been able to program a P18f46k22 mounted on the board using the method as I described above in my earlier post. The key is to move the jumpers J1, J2 and J4 over to the ri...

Hi Thanks for the reply. I would like to carry on using the PICPLCv6 development board and with the k series of PICs so could you confirm the following: If I use the on board jumpers to isolate the onboard programmer, can I use my stand-alone MikroProg programmer using a lead which I can make up and...

Here are some images that might show what is happening: Stan

Hi, I am using a PICPLC16v6 board with a P18f46k22 PIC mounted. My PC operating system is Vista 32 bit with mikroProg for PIC USB driver v2.00. MikroPascal V6.00. The problem is that with MP shut down and PICPLC16v6 switched off, I can load mikroProg and select the P18f46k22 from the dropdown list o...

Hi Janko

I am using XP64 Professional.

Both programs mikroPascal Pro for PIC ver 5.01 and Package Manager V2.3 have been installed as Administrator and set for all users.

I have tried re-installing Package manager but it still does not work?

Stan

I have just downloaded and installed Package Manager V2.3. I can open it on its own or via mikroPascal Pro for PIC ver 5.01 (registered) however, when I attempt to open a package, I get a warning that microPascal Pro for PIC is not installed on my computer -the Package Manager folder is installed in...

Thanks jpc, that helped solve the problem.

I downloaded and used the newer version of the HTTP_demo with MP v4.6 and it worked. I will update to MP 5.1 tomorrow.

Thanks

Stan

I'm having problems trying to get the demo program to build, it's my first attempt at using SPI_Ethernet. I am using MikroPascal Pro for PIC V 4.60. Dev Board PICPLC16 v6. I have not altered the demo program. When I attempt to build, the program stops at line 411 with message No. 373: 'Incompatible ...

I am having the same problem in micropascal Pro for PIC:

Message number 373 'Incompatible function pointers (function prototypes do not match): TCPHandler vs ?T210'

Obviously you must have resolved this issue - What was the solution?

Stan

Thanks for the quick response filip. I had already gone through the data sheet a few times whilst trying to establish a method for a fast/economic way of saving my data to serialflash. I was hoping that I could do it without splitting the dwords into separate bytes because of time constraints betwee...

Hi I note that the Serial Flash Driver has examples for Writebyte, Writeword, Writearray and the associated Read functions. What I need to know urgently is: 1. Will the serial Flash board accept Dword write/Reads? 2. Will the Serial Flash board accept arrays of Dword? 3. If the answer is yes to eith...

It's been a few days now since I sent the first post, any chance of an answer from the Mikro team? they are simple enough questions: Apart from upgrades due to new compiler versions and new PICs have you; 1. Upgraded the RS485 library in any way and how? 2. Changed the RS485 library to work with the...

[/pizon Posted: Wed Jul 20, 2005 7:38 am Post subject: Re: RS485 in 16F628A -------------------------------------------------------------------------------- Current RS485 library (Rs485_M_S.mcl) for PIC16's works only for devices that have PORTC; for those that are not so lucky it complains about la...

Then I must be breaking all the rules :twisted: I am using an old Dell Inspiron 4150 with USB 1 and am succesfully programming with an EasyPic4 and BigPic4 via a USB 1 KVM that has a keyboard and wireless mouse receiver operating with it - I know from posts in the forum that this should not be done,...

Having just returned to mP after working away, I have downloaded and started using the latest version of mP V5.0.0.3. However, I am having some problems using asm especially in relation to Main_Global_Variables. I have searched the forums and read the latest manual with no success. One problem I hav...