Filter Product By
Slide and select filter/s
Filtered by
Categories
Mikroe has collaborated closely with Microchip to offer you a broad portfolio of products from this vendor, which will help you reducing development effort and accelerate time to market. As a 3rd party tool provider we strive to promote partners newest theologies and products, by offering them to the broad market.
3D Motion Click is a compact add-on board providing a fully integrated inertial measurement solution. This board features Microchip’s MM7150, a 9-axis sensor fusion motion module. The MM7150 is a complete self-contained solution comprising a 3-axis accelerometer, a gyroscope, a magnetometer, and an SSC7150 motion coprocessor. The motion coprocessor has...
4x4 RGB click is a matrix of 16 "intelligent" RGB elements, forming a 4x4 display screen. These LED elements feature internal logic, which allows them to communicate directly with the MCU. These intelligent LEDs are meant to be cascaded: the elements communicate by a single line with the host MCU and they feature a signal reshaping section, so the data...
6LoWPAN Clicker 6LoWPAN Clicker is a compact development board with a mikroBUS™ socket for Click board™ connectivity. It carries Microchip’s PIC32MX470F512H - 120 MHz/150 DMIPS, MIPS32® M4K® core microcontroller. And CA-8210 2.4GHz ISM band transceiver, which allows you to add wireless communication to your project. Thousands of possibilities with Click...
AC Current 2 Click is an add-on board designed for safe, non-invasive measurement of alternating current (AC) through a conductor. This board features the MCP607 operational amplifier and the MCP3221 12-bit ADC, both from Microchip. This Click board™ features a galvanically isolated current sensing probe that clamps around the conductor without electrical...
AC Current click is a device that is able to measure the alternating current (AC) running through the conductor, using the so-called non-invasive current sensor. The non-invasive sensor works by utilizing the electromagnetic induction phenomenon, similar to a transformer. The primary coil does not exist though, the electromagnetic field is generated by...
ADC 2 Click is a compact add-on board with a high-performance data converter. This board features the MCP3551, a 22-bit precision ΔΣ analog-to-digital converter with SPI compatible interface (read-only) from Microchip. The MCP3551 has fully differential analog input making it compatible with a wide variety of industrial or process control applications,...
ADC 3 Click is a compact add-on board with a high-performance data converter. This board features the MCP3428, a 16-bit ΔΣ analog-to-digital converter with differential inputs and I2C compatible interface from Microchip. The MCP3428 performs conversions at rates of 15, 60, or 240 samples per second, depending on user-controllable configuration bit...
ADC 9 Click is 8th channel analog to digital converter expansion board, for projects where you have demand for multi channel ADC conversion such as microcontrollers with small number or none analog inputs. This Click board is based on MCP3564 a 24-bit Delta-Sigma Analog-to-Digital Converter with programmable data rate of up to 153.6 ksps from Microchip....
ADC Click is a compact add-on board that converts an analog voltage into a digital representation. This board features the MCP3204, a 4-channel 12-bit A/D converter with SPI serial interface from Microchip. The MCP3204 is specified for a maximum conversion of up to 100ksps as a throughput rate. Its SAR architecture is based on a successive approximation...
ATA6501 Click is a compact add-on board for high-speed CAN FD communication in automotive and industrial applications. This board features the ATA6501, a fully integrated CAN FD System Basis Chip (SBC) from Microchip, meeting Grade 0 AEC-Q100 standards. It supports both Classical CAN and CAN FD protocols with data rates up to 5Mbit/s and features an...
ATA6503 Click is a compact add-on board for high-speed CAN FD communication in automotive and industrial applications. This board features the ATA6503, a fully integrated CAN FD System Basis Chip (SBC) from Microchip, meeting Grade 0 AEC-Q100 standards. It supports both Classical CAN and CAN FD protocols with data rates up to 8Mbit/s, features an...
ATA6505 Click is a compact add-on board for high-speed CAN FD communication in automotive and industrial applications. This board features the ATA6505, a fully integrated CAN FD System Basis Chip (SBC) from Microchip, meeting Grade 0 AEC-Q100 standards. It supports both Classical CAN and CAN FD protocols with data rates up to 5Mbit/s, features an...
ATA6563 Click is a compact add-on board that provides an interface between a controller area network (CAN) protocol and the physical two-wire CAN bus. This board features the ATA6563, a high-speed CAN transceiver with standby mode from Microchip. The transceiver is designed for high speeds of up to 5Mbps and provides differential transmit and receive...
ATA6570 click is a CAN Partial Networking interface board. The click carries the ATA6570, a high-speed CAN transceiver that interfaces a Controller Area Network (CAN) protocol controller and the physical two-wire CAN bus. This IC has some unique features that make it a perfect choice for any embedded CAN application. It supports both CAN and CAN FD...
ATA6571 Click is a compact add-on board that contains a transceiver designed for high-speed CAN applications. This board features the ATA6571, a standalone high-speed CAN FD transceiver that interfaces a CAN protocol controller and the physical two-wire CAN bus from Microchip. It offers several operating modes with diagnostic and fail-safe features that...
ATA663211 Click is a compact add-on board with a physical interface to automotive and industrial LIN systems. This board features the ATA663211, a fully integrated LIN transceiver from Microchip, which complies with the LIN specifications 2.0, 2.1, 2.2, 2.2A, and SAEJ2602-2. The LIN transceiver interfaces both the LIN protocol handler and the physical...
ATA663254 click is a fully integrated LIN transceiver device with an integrated 5V LDO voltage regulator. The combination of voltage regulator and bus transceiver makes it possible to develop simple but powerful slave nodes in LIN bus systems. The integrated LDO can be used to provide power to the host MCU so that no additional voltage regulators are...
Audio Xover Click is a compact add-on board designed to manage frequency distribution across speakers in audio systems. This board features three precise Butterworth filters and does not rely on a main IC component. The board offers adjustable cutoff frequencies of 120Hz, 90Hz, and 70Hz, ensuring a maximally flat frequency response with sharp roll-off...
AVR-Ready2 Board AVR-Ready2 Board is the best solution for fast and simple development of 28-pin AVR microcontroller applications. It includes connectors for connecting the AVRprog in-system stand-alone programmer. This programmer enables you to program MCUs without any other additional device. There are also IDC10 connectors linked to the...
The AVRPLC16 v6 is an AVR-based PLC system used to develop industrial, home or office control devices. The system features GSM(GPRS), GPS communication, 16 relays, 8 optocoupled inputs, RS485, RS232, Ethernet, MMC/SD and many more.
Balancer 2 Click is an overvoltage protection device for a 2-series cell lithium-ion battery. Click contains two separate overvoltage battery detection circuits and automatic cell imbalance correction. It can be used for various applications, power tools, portable equipment, and instrumentation, to energy storage systems (ESS), while providing the output...
BEE Click is a compact add-on board that contains a fully integrated ZigBee transceiver. This board features the MRF24J40MA, a 2.4GHz RF transceiver module from Microchip. It is an IEEE802.15.4 standard-compliant RF receiver and supports ZigBee, MiWi, MiWi P2P, and proprietary wireless networking protocols. The module has low current consumption and can...
Empty 100-pin BIGAVR6 MCU Card that enable you to solder different AVR microcontrollers in TQFP package and other electronic components on it.
BIGAVR6 64-pin USB TQFP MCU Card Empty PCB
Loading
Load more
Loading
