![cercle_rouge.png](http://cdn.mikroe.com/product/for_many/on_board/cercle_rouge.png)
![tft_xmega.png](http://cdn.mikroe.com/product/mikromedia/mikromedia_2.8/for_XMEGA/on_board/tft_xmega.png)
TFT with Touch Panel
320x240 TFT Color Display with Touch Panel can display vivid and clear color images or advanced graphic content.
![reset_xmega.png](http://cdn.mikroe.com/product/mikromedia/mikromedia_2.8/for_XMEGA/on_board/reset_xmega.png)
Frontal Reset Button
If you place battery shield or integrate your board so that only front TFT is accessible, this reset button can be very handy.
![connector_audio.png](http://cdn.mikroe.com/product/mikromedia/mikromedia_2.8/for_XMEGA/on_board/connector_audio.png)
Audio Connector
Plug-in your headphones and listen to audio output from mp3 decoder circuit.
![connection_pads.png](http://cdn.mikroe.com/product/mikromedia/mikromedia_2.8/for_XMEGA/on_board/connection_pads.png)
Connection pads
Every unsused microcontroller pin is available through connection pads. They can be used to connect your mikromedia board with additional shields or accessory boards.
![battery_connector.png](http://cdn.mikroe.com/product/mikromedia/mikromedia_2.8/for_XMEGA/on_board/battery_connector.png)
Battery connector
Li-Polymer battery connector allows you easier connection with your battery. Autonomous power supply will give your mikromedia the wings it deserves.
![mini_usb.png](http://cdn.mikroe.com/product/mikromedia/mikromedia_2.8/for_XMEGA/on_board/mini_usb.png)
miniUSB connector
Fast on-board FTDI chip with USB connector, allow you to communicate with a PC or other UART devices using USB-UART connection.
![battery_charger.png](http://cdn.mikroe.com/product/mikromedia/mikromedia_2.8/for_XMEGA/on_board/battery_charger.png)
Battery Charger circuit
MCP73832 Battery Charger circuit enables you to charge your Li-Polymer battery directly from USB port.
![power_reg.png](http://cdn.mikroe.com/product/mikromedia/mikromedia_2.8/for_XMEGA/on_board/power_reg.png)
Power Regulator
On-Board power regulator ensures that each part of the board get the right voltages.
![ftdi.png](http://cdn.mikroe.com/product/mikromedia/mikromedia_2.8/for_XMEGA/on_board/ftdi.png)
FTDI chip
FTDI chip allows your mikromedia board to be connected with a PC through USB cable over UART connection.
![serial_flash.png](http://cdn.mikroe.com/product/mikromedia/mikromedia_2.8/for_XMEGA/on_board/serial_flash.png)
FTDI chip
FTDI chip allows your mikromedia board to be connected with a PC through USB cable over UART connection.
![reset_button.png](http://cdn.mikroe.com/product/mikromedia/mikromedia_2.8/for_XMEGA/on_board/reset_button.png)
Reset Button
High quality reset button with surrounding reset circuitry ensures stable reset operation.
![mcu.png](http://cdn.mikroe.com/product/mikromedia/mikromedia_2.8/for_XMEGA/on_board/mcu.png)
Microcontroller
Having lots of MIPS power, just enough flash and RAM, and rich set of inegrated modules, ATxmega128A1 is ideal choice for both beginners and professionals.
![rtcc_xtal.png](http://cdn.mikroe.com/product/mikromedia/mikromedia_2.8/for_XMEGA/on_board/rtcc_xtal.png)
32.768kHz Crystal Oscillator
32.768kHz crystal oscillator is provided as external clock for internal RTCC module.
![pdi_connector.png](http://cdn.mikroe.com/product/mikromedia/mikromedia_2.8/for_XMEGA/on_board/pdi_connector.png)
PDI connector
Your can program the board using external PDI In-Serial programmer. Connector is compatible with most popular ISP programmers on the market.
![power_led.png](http://cdn.mikroe.com/product/mikromedia/mikromedia_2.8/for_XMEGA/on_board/power_led.png)
Power LED
We have added power indicator LED, so you can be sure whether your board has stable power supply.
![microsd_slot.png](http://cdn.mikroe.com/product/mikromedia/mikromedia_2.8/for_XMEGA/on_board/microsd_slot.png)
microSD card slot
microSD Card slot allows you to store large ammounts of data externally on microSD card using fast SPI communication.