TFT with Touch Panel
320x240 TFT Color Display with Touch Panel can display vivid and clear color images or advanced graphic content.
Frontal Reset Button
If you place battery shield or integrate your board so that only front TFT is accessible, this reset button can be very handy.
Audio Connector
Plug-in your headphones and listen to audio output from mp3 decoder circuit.
Battery Charger
MCP73832 Battery Charger circuit enables you to charge your Li-Polymer battery directly from USB port.
Battery Connector
Li-Polymer battery connector allows you easier connection with your battery. Autonomous power supply will give your mikromedia the wings it deserves.
miniUSB connector
Microcontroller with USB support, allows you to communicate with a PC or other USB devices using USB connection.
Power Regulator
On-Board power regulator ensures that each part of the board get the right voltages.
RTCC Crystal Oscillator
Board contains 32.768kHz Crystal oscillator (X1) which provides external clock for internal RTCC module.
STM32F207VGT6
120MHz (Cortex-M3) operation; 0-wait states execution from 1Mbyte Flash memory, 128kbytes of RAM, low power, rich peripherals, you name it!
Reset Button
High quality reset button with surrounding reset circuitry ensures stable reset operation.
Stereo Audio codec
VS1053 MPEG audio decoder with SPI interface for fast reproduction of Ogg Vorbis / MP3 / AAC / WMA / FLAC / MIDI audio files.
Connection Pads
Every unsused microcontroller pin is available through connection pads. They can be used to connect your mikromedia board with additional shields or accessory boards.
Accelerometer
On board ADXL345 accelerometer is used to measure acceleration in three axes: x, y and z.
Serial Flash Memory
Store up to 8 Mbit of data in EN25F80 Serial Flash Memory with 25 MHz SPI Bus Interface. It suports over 100,000 Erase/Program Cycles per Sector and has over 20 Year Data Retention.
mikroProg connector
Pads for connecting and programming the board with mikroProg for STM32 external programmer
microSD card slot
microSD Card slot allows you to store large ammounts of data externally on microSD card using fast SPI communication.
Power LED
We have added power indicator LED, so you can be sure whether your board has stable power supply.