Filter Product By
Slide and select filter/s
Filtered by
RN4871 Click is a compact add-on board that provides Bluetooth wireless connectivity for any embedded application. This board features the RN4871, a Bluetooth 4.2 Low Energy module from Microchip. It integrates Bluetooth Low Energy (BLE), Bluetooth stack, and an RF power amplifier into one solution. The module uses GFSK modulation over the onboard...
PLC system used to develop industrial, home and office control devices. The system features GSM/GPRS communication, 16 relays, 16 optocoupled inputs, RS485, RS232, serial Ethernet, etc. Buy now Put a PIC in charge. 16 inputs and outputs Relays and optocouplers Develop complex industrial, home or office control systems with 16 optocouplers...
The EasyConnect2 Board allows you to connect peripherals to your development system fast and easily by using high-quality small connectors provided on the board. This board is useful in power and high-speed signal handling applications.
RTC Click is a compact add-on board that measures the passage of real-time. This board features the PCF8583, a clock, and a calendar with 240x8-bit RAM from NXP Semiconductors based on a 2048-bit static CMOS RAM organized as 256 words by 8 bits. The PCF8583 provides information like seconds, minutes, hours, days, months, years, and dates based on a...
NECTO Studio Monthly subscription is the quickest and easiest way to unlock your NECTO Studio for ALL supported compilers (mikroC AI for ARM, mikroC AI for PIC, mikroC AI for PIC32, mikroC AI for dsPIC, mikroC AI for AVR and GCC toolchain for RISC-V). MIKROE-5228
Riverdi Click is a compact add-on adapter board that provides an interface for connecting the Riverdi TFT displays to any MCU. This board features the ZIF20 connector and necessary circuits for interfacing Riverdi’s displays based on the FT8xx graphic controller. This Click adapter allows all FT8xx-based Riverdi displays to be interfaced with a...
Support for three different architectures: dsPIC33, PIC24 and PIC32 in a single development board. It contains many on-board modules, including multimedia, Ethernet, USB, CAN and other. On-board mikroProg™ programmer and debugger supports 101 microcontrollers via MCU cards. Buy now Note: MCU and click boards are not included in the package. One...
Shuttle click in combination with mikroBUS Shuttle provides an easy and elegant solution for stacking multiple Click boards™ on a single mikroBUS™. Shuttle click can be especially interesting for the IoT development systems that are equipped with a very small number of mikroBUS™ slots. Using Shuttle click on such system will greatly improve its usability...
ADC 3 Click is a compact add-on board with a high-performance data converter. This board features the MCP3428, a 16-bit ΔΣ analog-to-digital converter with differential inputs and I2C compatible interface from Microchip. The MCP3428 performs conversions at rates of 15, 60, or 240 samples per second, depending on user-controllable configuration bit...
The 5V-3.3VReg Board is an accessory board that includs an on-board regulator. This regulator is used to provide local on-card regulation by reducing voltage from 8-16V AC/DC to 5V or 3.3V DC.
Compass Click is a compact add-on board representing an electronic compass. This board features the LSM303DLHC, an ultra-compact, high-performance e-compass module featuring a 3D digital linear acceleration sensor and a 3D digital magnetic sensor from STMicroelectronics. It includes a specific sensing element capable of measuring both linear acceleration...
Determine your current position with GNSS 5 click. It carries the NEO-M8N GNSS receiver module from u-blox. GNSS 5 click is designed to run on a 3.3V power supply. The click communicates with the target microcontroller over I2C or UART interface, with additional functionality provided by the following pins on the mikroBUS™ line: RST, INT, PWM.
Platinum resistance temperature sensorPT100 3-wire temperature probe is a type of RTD platinum probe used to measure temperatures up to 250°C. This type of probe can be used with RTD click. RTD sensors are basically thermosensitive resistors – materials that change the resistance depending on their temperature. In this case, the resistor is a small strip...
2.83" TFT color display MI0283QT-9A with 320x240 pixel resolution...
Color Click is a compact add-on board representing an accurate color-sensing solution. This board features the TCS3471, a color light-to-digital converter from ams AG. It can sense red, green, and blue light components and clear light. It has a very high dynamic range of 1,000,000:1, which allows it to be used in various light conditions. It is equipped...
Standard solderless breadboard. It has 2 power buses, 62 columns and 10 rows - a total of 830 contact points.
Circular NFC R25 Antenna is PCB antenna designed with the intention to be used as extension of development boards and placed remotely on desired place such as plastic casing, existing products, or even under displays. Antenna is designed in circular shape with diameter of 25mm. Its important to mention that this antenna can be used for NFC and RFID...
LCD Mini Click is a compact add-on adapter board that allows you to interface an LMB162XFW LCD display to any microcontroller. This board features the MCP23S17, a 16-bit I/O expander with a serial interface from Microchip. It allows you to display 2x16 monochrome characters on an LMB162XFW LCD display and is ideal for displaying short messages or numbers...
1x16 Male Pin Header
LTE IoT 4 Click is a compact add-on board that contains an IoT module with worldwide coverage. This board features the nRF9160, highly integrated, low-power SiP with LTE-M/NB-IoT and GPS from Nordic Semiconductor. The nRF9160 has an integrated ARM® Cortex®-M33 processor supported by 1MB of Flash and 256KB RAM memory with advanced security features. It can...
Thunder Click is a compact add-on board that detects the presence and proximity of potentially hazardous lightning activity in the vicinity. This board features the AS3935, a programmable fully integrated lightning sensor from ScioSense with a sensitive coil antenna, and the MA5532 from Coilcraft. Besides detecting potentially hazardous lightning...
ETH 3 Click is a compact add-on board that contains Ethernet Controller & PHY for embedded applications. This board features the LAN9250, a fully featured 10/100 Ethernet controller that provides performance, flexibility, ease of integration, and system cost control from Microchip Technology. It complies with the IEEE802.3 (Full/Half-Duplex 10BASE-T...
MCP2542 click is the CAN bus transceiver, which allows TTL/CMOS level signals typically found on MCUs, to be used for the communication via the CAN bus, which uses the higher voltage levels and differential signals. In addition, this Click board™ protects the sensitive MCU part of the device from excessive voltage spikes and electrostatic discharges...
The UNI-REG Board features a Step-Down Voltage Regulator LM2576 that enables voltage to change from 7-23V AC (or 9-32V DC) to 5V, 4V, 3.3V, 2.7V or 1.8V. The board components are clearly marked, which makes the connection easier.
Loading
Load more
Loading
