Filter Product By
Slide and select filter/s
Filtered by
Remote Temp Click is a temperature sensing Click board™, which features the EMC1833 from Microchip, a specifically designed IC, capable of measuring remote temperature. This option makes Remote Temp click well-suited for monitoring the temperature of a CPU, GPU or FPGA, where the BJT model junction can be a substrate PNP or NPN. Remote Temp click can be...
Multi Stepper Click is a compact add-on board that contains a bipolar stepper motor driver. This board features the TB67S269FTG, CLOCK-in controlled bipolar stepping motor driver from Toshiba Semiconductor. It supports a PWM constant-current control drive and allows from full-step up to 1/32 steps resolution for less motor noise and smoother control. It...
CODEGRIP for ARM is a fast USB-C programmer and hardware debugger. It supports ARM Cortex-M0, M3,M4 and M7 based MCUs. This is a version without a WiFi module assembled.
MCP16331 click functions as a buck-boost voltage regulator, a switching regulator topology that combines principles of the buck conversion (step-down) and the boost conversion (step-up). A buck converter outputs voltage that is smaller than the input voltage (steps down the input voltage). A boost converter outputs voltage that is greater than the input...
Gyro 5 Click is a three-axis gyroscope Click board™ that can sense motion over three perpendicular axes. It is equipped with the ITG-3701, a three-axis digital gyroscope. This IC incorporates microelectromechanical sensing elements (MEMS), produced using a proprietary CMOS micromachining technology. This technology allows for excellent stability and...
SiBRAIN is a standardized microcontroller add-on board, which allows very simple installation and replacement of the microcontroller unit (MCU) on a development board equipped with the SiBRAIN Card socket. By introducing the new SiBRAIN Card standard, we have ensured the absolute compatibility between the development board and any of the supported MCUs,...
FRAM 5 Click is a compact add-on board representing a highly reliable ferroelectric random access memory solution. This board features the FM24V10, a 1Mbit nonvolatile memory employing an advanced ferroelectric process organized as 128K words of 8 bits each from Infineon. This I2C configurable FRAM performs read and write operations similar to a RAM...
Thermo 26 Click is a compact add-on board that accurately measures temperature. This board features the STS31-DIS, a high-accuracy digital temperature sensor from Sensirion. Characterized by its high accuracy (up to ±0.2°C typical) and high resolution of 0.01°C, the STS31-DIS provides temperature data to the host controller with a configurable I2C...
USB 3.1 Type C Female to USB 3.0 A Male Data Adapter converts the USB-C head data into the ordinary USB 3.0 data cable, representing at the same time the new USB 3.1 design that supports charging and data transfer features. This type C connector supports reversible plug orientation as well as the cable direction. Based on its compact design and...
Speed Radar Click is a compact add-on board that comes with a radar speed detector. This board features the K-LD2, a radar transceiver from RFbeam. It is a 24GHz radar with a detection distance for humans of up to 15m and cars of up to 30m. Its digital structure makes it easy to use in an MCU-based application or as a standalone device where movement...
LV-24-33 v6 44-pin TQFP MCU Card Empty PCB
Proximity 8 click is a close-range proximity sensing Click board™, equipped with the VCNL36687S, a very accurate and power-efficient proximity sensor (PS) with VCSEL. A Vertical-Cavity Surface-Emitting Laser (VCSEL) is used in conjunction with the advanced analog and digital frontend circuits, which allow minimal power consumption and simplified...
TFT Board 3 Capacitive with frame is a 3.5" display board which features the standardized 2x20-pin display connector. The display board also integrates a capacitive multitouch panel with swipe and zoom gesture support. The TFT display module supports up to 24-bit pixel format (RGB: 888), allowing a true-color palette of 16,7 million colors, and...
Analog MUX 3 Click is a compact add-on board that switches one of the eight inputs to one output. This board features the ADG738, a CMOS analog matrix switch with a serially-controlled SPI interface from Analog Devices. In an active state, the ADG738 conducts equally well in both directions, making it suitable for multiplexing and demultiplexing...
Smart DOF 2 Click is a compact add-on board with a highly advanced integrated 6-axis IMU measurement unit. This board features the LSM6DSV16X, a high-performance 6-axis IMU with sensor fusion, ASC, MLC, Qvar, and OIS/EIS paths from STMicroelectronics. The IMU unit features an accelerometer and gyroscope that can be turned off independently of each other,...
We challenge you to beat an STM32 it in a blitz game. Our chief of software can do it fairly consistently. How well will you fare? You can use the SpeakUp to speak out your moves while you skim a book on chess openings.
A high-quality cost-effective 3.5" TFT display with a projected capacitive touch screen and a metal mounting frame for easier integration. Easy to use with MikroElektronika development tools.
Matrix RGB programming bundle - Build a 32x32 pixel size display panel.
Fusion for KINETIS v8 is packed in the protective box along with the relevant documentation.This box is very resistant to all kinds of damage and shock. The package contains: Damage resistant protective box Fusion for KINETIS v8 board MCU and Display board flyers Adapter - USB-C Female to USB-A Male Adapter - USB Micro Female to USB-C Male...
DC Gear Motor - 430RPM (3-6V) represents a brushed DC motor with a spur gearbox rated for 3-6V operational voltage range, 430RPM speed, and 60mA maximum current with a torque of 50g.cm at maximum efficiency. A great solution for fulfilling many functions initially performed by brushed DC motors in robotics, medical equipment, electric door lock, and much...
NECTO Studio Monthly subscription is the quickest and easiest way to unlock your NECTO Studio for ALL supported compilers (mikroC AI for ARM, mikroC AI for PIC, mikroC AI for PIC32, mikroC AI for dsPIC, mikroC AI for AVR and GCC toolchain for RISC-V). MIKROE-5228
DIGI IN Click is a compact add-board that converts industrial inputs into serialized SPI-compatible output. This board features the MAX22199, an octal industrial digital input from Analog Devices. It stands out for its compliance with the IEC 61131-2 standard, ensuring reliability and efficiency. This board processes eight 7-24V current-sinking inputs,...
The Fan 6 click is a Click board™ which features EMC2103, an SMBus compliant fan controller with up to up to 3 external and 1 internal temperature channels. The fan driver can be operated using two methods each with two modes. The methods include an RPM based Fan Speed Control Algorithm and a direct PWM drive setting. The modes include manually...
DC Motor 6 Click is a PWM chopper type brushed DC motor driver, labeled as TB67H451AFNG, produced by Toshiba. This IC includes one channel of motor output block, using a wide range of supply voltages, while delivering reasonably high current to the connected DC motors. Low ON-resistance MOSFETs and a PWM control help the TB67H451AFNG exhibit lower heat...
Loading
Load more
Loading
