Filter Product By
Slide and select filter/s
Filtered by
Stretch Click is a compact add-on board for measuring stretch forces with conductive rubber cords. This board features circuitry that allows measuring the stretch forces of the 2mm diameter conductive rubber cord. This Click board™ comes equipped with the screw terminal, and two copper exposed pads, aside from the screw terminal, in addition to using the...
Smoke Click is a compact add-on board that can detect the presence of smoke. This board features the MAX30105, a high-sensitivity optical sensor for smoke detection applications from Analog Devices. It provides a complete system solution to ease the design-in process of smoke detection applications, including fire alarms. The sensor can detect a wide...
LPS22HB click is an easy solution for adding a digital barometer to your design. It carries the LPS22HB MEMS nano pressure sensor. The click is designed to run on a 3.3V power supply. LPS22HB click communicates with the target microcontroller over I2C or SPI interface.
USB UART 5 Click is a compact add-on board with a general-purpose USB to UART serial interface. This board features the CP2110, a highly-integrated USB-to-UART bridge controller from Silicon Labs. The CP2110 uses the standard USB HID device class, requiring no custom driver and a UART interface that implements all RS-232 signals, including control and...
TouchKey 2 Click is a compact add-on board with four capacitive pads explicitly designed for touchpad controls. This board features the ATtiny817, an 8-bit AVR microcontroller from Microchip. The ATtiny MCU has an integrated touch QTouch® controller, which supports a capacitive touch interface with proximity sensing. This Peripheral Touch Controller (PTC)...
BUCK click is a buck switching regulator that accepts a wide input voltage range of up to 40V and steps it down to 3.3V or 5V. The click carries the LT3976 40V, 5A, 2MHz step-down switching regulator with 3.3µA quiescent current. BUCK click communicates with the target microcontroller over the following pins on the mikroBUS™ line: PWM, INT, RS, CS.
Vibra Sense 2 Click is a compact add-on board that contains a piezo sensor suitable for vibration measurements. This board features the LDT0-028K, a flexible 28 μm thick piezoelectric PVDF polymer film with screen-printed silver ink electrodes, laminated to a 0.125 mm polyester substrate, and fitted with two crimped contacts from TE Connectivity. The...
Accel 12 Click is a compact add-on board for building smart, motion-aware applications. It is based on the MC3216, a low-noise, low-power accelerometer from MEMSIC. It supports linear acceleration and gravity force measurements across ±2g, ±4g, ±8g, and ±16g ranges on X, Y, and Z axes. The sensor features a 14-bit ADC for precise digital output via I2C...
6DOF IMU 22 Click is a compact add-on board for advanced motion tracking. This board features the ICM-42670-P, a high-performance 6-axis MEMS MotionTracking IMU from TDK InvenSense. The ICM-42670-P integrates a 3-axis gyroscope and accelerometer, offering exceptional precision in motion detection. It supports both I2C and SPI interfaces for communication,...
Ribbon Cable 26-wire, Female IDC/Male, 20 cm
MiWi click is a subgigahertz radio transceiver click board™, which offers a reliable FSK or OOK communication solution, with the maximum data rates of 40kbps and 16kbps, respectively. The radio transceiver module used on this click board™ has plenty of features that make it a perfect choice for compact designs: It has very good reception sensitivity, an...
LR 4 Click is a compact add-on board that contains a long-range transceiver. This board features the 32001353, RF technology-based SRD transceiver, which operates at a frequency of 868MHz from Mipot. Thanks to the spread spectrum modulation feature, as well as the low power consumption, it is capable of achieving long-range communication, immune to...
DC MOTOR 7 Click is a dual brushed DC motor driving Click board™, featuring the advanced PWM chopper-type integrated DC motor driver, labeled as TB67H400AFTG. This IC can drive two brushed DC motors independently, using a wide range of supply voltages, while delivering reasonably high current to the connected DC motors. This is possible due to the low...
Create your prototype devices with AVR microcontrollers immediately. Get Easy Start Kit - AVR with mikroC, mikroBasic or mikroPascal at affordable price.
Thermo 20 Click is a compact add-on board that provides an accurate temperature measurement. This board features the TSYS03, a miniature digital temperature sensor that comes up with factory calibrated, highly accurate temperature data from TE Connectivity. This temperature sensor characterized by its accuracy and high resolution offers digital output...
The SerialRAM Board enables you to use a 64 Kbit Serial SRAM device with your development board. The board features the 23K640 Serial RAM device that communicates with microcontrollers via a Serial Peripheral Interface (SPI).
Mikromedia 4 CAPACITIVE shield is the perfect way to expand the functionalities of your mikromedia 4 CAPACITIVE with 4 mikroBUS™ sockets - add any functionality from our ever-growing range of Click boards™. We are fully stocked with everything from sensors and wifi transceivers to motor control and audio amplifiers. The board features 4 mikroBUS™ sockets...
Stepper 7 click is a bipolar step motor driver. It features an H-bridge bipolar step motor driver, which supports full and half step control modes. Stepper 7 click also carries a port expander so that the communication can be done with a minimal number of pins, through the mikroBUS™ SPI bus. Stepper 7 click offers thermal protection, integrated kickback...
Color 9 Click is a very accurate color sensing Click board™ which features the APDS-9250, IR and ambient light sensor, from Broadcom. It contains a specially designed matrix of photosensitive elements, which can sense red, green, blue and IR component. Four low noise 18bit ADCs ensure the high dynamic range, making this sensor suitable to be used behind...
Vibro Motor click features a compact size Eccentric Rotating Mass (ERM) motor, labeled as C1026B002F. This type of motor is often used for haptic feedback on many small handheld devices, such as the cellphones, pagers, RFID scanners and similar devices. This motor contains a small eccentric weight on its rotor, so while rotating it also produces vibration...
LCD Mono Click is a Click board™ that uses the LS013B7DH03 LCD display from Sharp which combined with the EFM32, from Silicon Labs, and its energy saving capabilities creates a powerful display application. The application is capable of driving a 128x128 pixel display drawing as little as 2 µA while showing a static image. Even when updating the frame...
Spectrometer Click features an 11-channel spectrometer for spectral identification and color matching applications. This Click board™ features the AS7341 from AMS-AG, whose spectral response is defined in the wavelengths from approximately 350nm to 1000nm. Control and Spectral data access are implemented through a serial I2C interface with very a low...
mikromedia 7 for STM32 Shield is the perfect way to expand the functionalities of your mikromedia 7 for STM32F4 and mikromedia 7 for STM32F7 with five mikroBUS™ sockets - add any functionality from 1645 of Click boards™. We are fully stocked with everything from sensors and wifi transceivers to motor control and audio amplifiers.
VREG Click is a compact add-on board with circuitry for digitally controlled DC voltage regulation. This board features the LM317M, an adjustable voltage regulator from STMicroelectronics. The VREG Click can regulate external power supplies over the screw terminals, but also the internal from the host board itself, in this case, 3.3 or 5V. The circuit...
Loading
Load more
Loading
