Filter Product By
Slide and select filter/s
Filtered by
3D Hall Click is a compact add-on board used to detect the strength of a magnetic field in all three dimensions. This board features the MLX90333, a Triaxis® position sensor from Melexis Technologies. The MLX90333 can sense any magnet moving (rotational, linear, and 3D displacement with a high degree of precision) in its surrounding through the...
Heart Rate 7 click is an optical biosensor Click board™ which can be used for heart-rate monitoring (HRM). This Click board™ employs a very sensitive analog front-end IC with high dynamic range, which ensures accurate and reliable readings. This analog front-end IC is coupled with the optical front end, which consists of a sensitive photo-diode (PD) and...
The EasyPS/2 Board enables your development board to be connected to a PS/2 device. There is an on-board PS/2 connector used to establish PS/2 communication. The board also features a DIP switch used to configure board connections.
Motion 4 Click is a long distance PaPIR's motion sensor with plastic lense and controllable output. This Click board features EKMC1603111, a PIR motion sensor from Panasonic Corporation which can be used as human motion detector and is able to detect movement up to 12m with 170uA current consumption. Also featured on Motion 4 Click bord is TLP241A...
RTC 8 click is a real time clock module which has an extremely low power consumption, allowing it to be used with a single button cell battery, for an extended period of time. The RV-3028-C7 module built on the RTC 8 click is able to output the time in the standard format, as well as in the 32-bit UNIX format. Integrated, factory calibrated XTAL operating...
Click shield for Particle Gen 3 Combine Particle's B series of cellular IoT modules with your favorite Click boards™ Start your project development with our Click shield for Particle Gen 3 fast and easy. This Click Shield designed with an M.2 connector, combined with two mikroBUS™ sockets, provides you immediate access to thousands of Click boards™...
STM32F3 Discovery Shield is an extension for STM32F3 Discovery Board from STMicroelectronics. It carries four mikroBUS host sockets, USB-UART module and CAN transceiver. Use it to quickly turn your Discovery board into fully working device.
PICtail™ Plus Click Adapter allows you to add click boards™ on the Explorer 16 Development Board from Microchip. It's an adapter with two mikroBUS™ sockets for click board connectivity.
Environment 2 Click is a compact add-on board containing best-in-class SHT humidity and SGP air-quality sensing solutions from Sensirion. This board features SHT40 and SGP40, a high-accuracy ultra-low-power relative humidity, and a temperature sensor combined with MOx based gas sensor. The SHT40 sensor offers linearized digital output, provides constant...
SPI Isolator Click is a compact add-on board with a digital isolator optimized for a serial peripheral interface. This board features the ADuM4154, a 5kV digital isolator optimized for a serial peripheral interface (SPI) from Analog Devices. Based on the iCoupler® chip scale transformer technology, the low propagation delay and jitter in the SCLK, SI, SO,...
Load Cell 5 Click is a compact add-on board that represents a weigh scale solution. This board features the AD7780, a pin-programmable, low power, 24-bit sigma-delta ΣΔ ADC from Analog Devices. It interfaces directly to the load cell, where the low-level signal from the load cell is amplified by the AD7780’s internal low noise programmable gain amplifier...
Start designing your application with graphical user interface quickly with VisualGLCD and SmartGLCD 240x128 device. Buy this kit and get 30$ USD discount.
Temp&Hum 24 Click is a compact add-on board that measures the surrounding environment's humidity and temperature. This board features the HDC3021, an integrated capacitive-based relative humidity and temperature sensor with a removable tape cover from Texas Instruments. The HDC3021 is characterized by its high accuracy (±0.5%RH and ±0.1°C over a wide...
Fingerprint 3 Click bundle - Build a capacitive fingerprint scanner solution with a two-color ring indicator. This bundle allows users to secure their projects with a biometric all-in-one fingerprint sensor that will make fingerprint detection and verification super simple.
Ribbon Cable 10-wire, Male/Female, 20 cm
20-pin 0.05" ARM Cortex Debug + ETM Adapter comes with flat cable with IDC 2x10 0.05" pitch connectors
ECG 2 click bundle (the click + cable + electrodes) has what you need to start recording your ECG. Prototype your own health-tracking and fitness devices, find out how healthy your hart is or...
GNSS RTK 2 Click is a compact add-on board used to enhance the precision of position data derived from satellite-based positioning systems. This board features the ZED-F9R, a multi-band professional-grade GNSS module with integrated multi-band Real Time Kinematics (RTK) technology offering centimeter-level accuracy from u-blox. This module concurrently...
The Slider 2 click is a very accurate potentiometer Click Board, featuring a high-quality mechanical slide-action potentiometer (slider), which in conjunction with the accurate voltage reference IC, provides very precise analog control voltage (CV) at its output. Featuring an accurate voltage reference IC, the output of the Click board™ can be directly...
UART 1-Wire click is used to convert standard UART or RS232 signals into 1-Wire® signals. Apart from other features such as the slew rate control for larger 1-Wire® busses, selectable data rate, an accurate self-calibrating time base, ESD protection and more, the main feature of the UART 1-Wire® click, is that it manages all the sensitive signal timings...
DAC 8 Click is a compact add-on board that contains a fully-featured, general-purpose voltage-output digital-to-analog converter. This board features the DAC8554IPWR, a 16-bit QUAD channel voltage-output digital to analog converter from Texas Instruments. It offers the low-power operation, good linearity, exceptionally low glitch, and supports a 3-wire...
ATMEGA16 is Atmel 8-bit AVR RISC-based microcontroller...
Altitude 3 click allows high-resolution barometric pressure measurement, by utilizing the ICP-10100, an integrated barometric pressure and temperature sensor. Based on the advanced MEMS capacitive sensing technology, it offers an industry-level accuracy and thermal stability. A very high absolute pressure accuracy up to ±1 Pa allows Altitude 3 click to...
Loading
Load more
Loading
