Filter Product By
Slide and select filter/s
Filtered by
USB Cable 2m Braided in Silver, Blue, Brown, Green, Pink colors (Type A-Micro B)
A smart display solution, mikromedia HMI 4.3" Res has a 480x272px color display with a resistive touch panel on the front, and a powerful FT900Q 32-bit MCU with additional essential circuitry on the back - making it a standalone but cost-effective solution suitable for industrial applications.
EnOcean 3 Click carries an ultra-low power TCM515 transceiver gateway module which operates at 868MHz radio band, perfectly suited for the realization of transceiver gateways, actuators and controllers for systems communicating based on the EnOcean radio standard. For communication to other devices we have implemented PCB antenna on the board making this...
DAC 5 Click carries Texas Instruments DAC53608 IC, a low-power, eight-channel, 10-bit buffered Digital-to-Analog Converter. DAC53608 converts digital value to the corresponding voltage level using external voltage reference. For that purpose, DAC 5 click uses MAX6106, which is a low-dropout micropower voltage reference with 2,048V output voltage. With all...
LTE Cat.1-EU Click is a compact add-on board containing a low-power LTE-IoT connectivity solution. This board features the ELS61 (ELS61-EU), a multi-band wireless module from Telit Cinterion. The ELS61-EU delivers highly efficient Cat 1 LTE connectivity for M2M IoT solutions offering seamless fallback to 2G and 3G networks. The best in the class solution...
Smart Card 2 Click is a compact add-on board for reading smart cards. This board features Microchip’s SEC1210, a low-power single-chip Smart Card controller with a UART interface. The SEC1210 bridge controller uses a combination of hardware and software to deliver high-performance and flexible design customization options. It is fully compliant with...
LED Flash click functions as a high power LED flash, and carries the CAT3224 flash LED driver. The click is designed to run on a 5V power supply. It communicates with the target microcontroller over the following pins on the mikroBUS™ line: AN, RST, PWM, and INT.
ccRF 3 Click is a compact add-on board that adds sub-gigahertz wireless communication to any MCU. This board features the CC1120, a high-performance RF transceiver from Texas Instruments for narrowband systems. With extremely low power consumption, this board is designed mainly for the ISM (Industrial, Scientific, and Medical) and SRD (Short Range Device)...
2Pin ST Connector (DG500-5.08) is a PCB terminal block from Degson that provides connections for high current conductor cross-section with the proven clamping-yoke connection in 5.08 mm pitch and 90° conductor outlet direction. It can withstand current and voltage ratings up to 20A and 300VAC, ensuring reliability in power delivery applications. Based on...
dsPIC-Ready2 Board dsPIC-Ready2 Board provides the best solution for fast and simple development of 40-pin dsPIC30F microcontroller applications (dsPIC30F3014 and dsPIC30F4013). It includes connectors for connecting the dsPICprog with mikroICD in-system stand-alone programmer. These connectors enable you to program microcontrollers without any other...
RS485 7 Click is a compact add-on board that enables communication over an RS485 network. This board features the THVD1424, a full duplex RS485 transceiver with a selectable data rate from Texas Instruments. The THVD1424 offers several pin-controlled features, including an on-chip 120Ω termination resistor, slew rate control, and the ability to switch...
NTAG 5 Link Click is a compact add-on board that acts as a bridge between an NFC-enabled device and any I2C slave, such as a sensor or external memory. This board features the NTP5332, a highly integrated NFC IC which creates a secure standard-based link from the device to the cloud from NXP Semiconductors. Based on the NTAG 5 link and operating at...
The PT MCU CARD 1. It contains a PIC24FJ128GA310 microcontroller with on-chip peripherals and is a great choice for both beginners and professionals. After testing and building the final program, this card can also be taken out of the board socket and used in your final device.
RS485 Isolator Click is a compact add-on board that provides electrical isolation and signal conditioning for RS485 communication systems. This board features the ADM2682E, a signal, and a power-isolated RS-485 transceiver with ESD protection from Analog Devices. It is a 5KVrms isolated RS485/RS422 transceiver with ±15kV ESD protection that can be...
Convert SOIC-SOP14 pins (300 mil wide) package to DIP 14 pins.
EasyLED board contains 8 surface mounted LEDs with low power consumption and two IDC10 header connectors.
MikroElektronika Pen - In Red and White color, the yellow one carries LibStock writing.
mikroProg for Kinetis is a fast programmer and hardware debugger for NXP's ARM Cortex™-M microcontrollers from the Kinetis family. Outstanding performance, easy operation, elegant design and low price are its top features. It is supported in MikroElektronika ARM compilers (mikroC, mikroBasic, and mikroPascal).
Convert SOIC Wide 28 pins (600 mil wide) package to DIP 28 pins.
Expand 3 Click is a compact add-on board providing general-purpose I/O expansion. This board features the DS2408, an 8-channel programmable I/O expander from Analog Devices. The DS2408 has a factory-lasered 64-bit registration number, enabling multiple Expand 3 Click boards™ to be connected on the same data line, communicating with the host MCU through a...
Pressure 22 Click is a compact add-on board that contains a board-mount pressure sensor. This board features the MS5839-02BA, an ultra-compact chlorine-resistant digital pressure and temperature sensor from TE Connectivity. The sensor is a small digital altimeter operating from 300 up to 1200mbar, optimized for applications where chlorine and saline are...
Vacuum click is an accurate vacuum pressure sensing click board™, capable of measuring absolute pressure values down to -115kPa. This click board™ utilizes the MPXV6115V, a very accurate vacuum pressure sensor. This piezo-resistive transducer is a monolithic sensor which combines advanced MEMS manufacturing technology with the on-chip signal processing,...
Click Shield for Nucleo-64 Combine Arduino UNO with your favorite Click boards™ Experience a seamless project development journey with the Click Shield for Arduino UNO. This cutting-edge solution combines the power of the Arduino UNO board and the versatility of mikroBUS™ sockets, offering unparalleled ease and efficiency. By utilizing the extensive...
RS485 Isolator 3 Click is a compact add-on board that provides electrical isolation and signal conditioning for RS485 communication systems. This board features the ADM2763E, a 500kbps, 5.7kV RMS, signal-isolated RS-485 transceiver from Analog Devices. The ADM2763E is protected against ≥±12 kV contact and ≥±15 kV air IEC 61000-4-2 electrostatic discharge...
Loading
Load more
Loading
