Filter Product By
Slide and select filter/s
Filtered by
DAC 3 Click is a compact add-on board with a fully-featured, highly accurate digital-to-analog converter. This board features the MCP4726, a 12-bit voltage output digital-to-analog converter from Microchip. The MCP4726 has a rail-to-rail output, low power consumption, and EEPROM as non-volatile memory for storing DAC register and configuration bit values....
The SmartG100 Board is a uBlox Leon-G100 GSM/GPRS module development board. The switching power supply is available on-board, so that there is no need for additional components. An antenna is delivered with the board for a better signal quality.
LDC1000 Click is a compact add-on board that measures the inductance change a conductive target causes when it moves into the inductor's AC magnetic field. This board features the LDC1000, a low-power inductance-to-digital converter (LDC) for inductive sensing solutions from Texas Instruments. This SPI-configurable sensor requires only the frequency...
An XYZ Chromatic White Color Sensor Spectral click is a multispectral light sensing device, which uses the state-of-the-art sensor IC for a very accurate chromatic white color sensing. Spectral click provides a direct reading of the XYZ color coordinates, consistent with the CIE 1931 2° Standard Observer color coordinates. It provides mapping of the XYZ...
4G LTE-AT&T click is an LTE Cat 1 / UMTS multimodecellular network solution, featuring the compact LARA-R2 series modem from u-blox. This module supports up to four LTE bands and up to two UMTS bands. It also features a full range of options for the high speed cellular networking and communication, such as the network indication, full embedded TCP/UDP...
NFC Extend Click is NFC tag interface device with possibility of using any shape and size external antenna, offering 16 Kbit of electrically erasable programmable memory (EEPROM). This Click Board™ offer two communication interfaces. The first one is an I2C serial link and can be operated from a DC power supply. The second one is a RF link activated when...
HVAC Click is a compact add-on board that contains Sensirion’s next-generation miniature CO2 sensor. This board features the SCD41, a carbon dioxide sensor build on the photoacoustic sensing principle, and Sensirion’s patented PASens® and CMOSens® technology to offer high accuracy at a minor form factor. On-chip signal compensation is realized with the...
Click Shield for Nucleo-144 Empower your ideas with STM32 Nucleo-144 and your favorite Click boards™ Seamlessly develop with our Click Shield for Nucleo-144! Unleash the full potential of STM32 Nucleo-144 boards, coupled with mikroBUS™ sockets, granting you instant access to our extensive range of Click boards™. The possibilities are boundless - create...
M-BUS RF Click is a compact add-on board that contains a complete M-BUS RF digital data transceiver. This board features the ME70-169, a wireless M-BUS module compliant with the EN13757 part4 2013 from Telit Cinterion. The ME70-169 module is a multi-channel radio board, delivering up to 1W in the 169MHz ISM unlicensed frequency band. The frequency range...
Solderless breadboard with a total of 170 contact points. It’s made of black, white, red, blue and green plastics, conveniently small in size and can easily integrate into any design.
TFT Board 5 Capacitive is a 5" display board which features the standardized 2x20-pin display connector. The display board also integrates a capacitive multitouch panel with swipe and zoom gesture support. The TFT display module supports up to 24-bit pixel format (RGB: 888), allowing a true-color palette of 16,7 million colors, and resolution of 800 x...
TFT Proto 7" carries an 800x480 FRD070IF40-A TFT screen covered with a 4-wire resistive touchscreen panel.o drive the 262k-color display, there's an SSD1963 graphic controller with an 8/9/16/24-bit MCU interface.
The mikroBoard is miniature development tool which includes microcontroller, programer, small proto board and two 2x40 female headers for connection with UNI-DS6 development system.
The RTC PROTO Board enables you to connect your prototype device with a Real-Time Clock (RTC). The board features the PCF8583 clock/calendar circuit based on a 2048-bit static CMOS RAM organized as 256 words each consisting of 8 bits.
A high-quality cost-effective 7" TFT display with a projected capacitive touch screen and decorative cover glass (black bezel). Well integrated with MikroElektronika tools. Also available with white bezel.
Relay 5 Click is a compact add-on board with general-purpose I2C-controlled relays that any host MCU can control. This board features three J1031C3VDC.15S, a high-current single-pole double-throw (SPDT) signal relays controlled by the PCA9538A, a low-voltage 8-bit I/O port expander from NXP Semiconductors. Highly sensitive, the J1031C3VDC.15S offers a low...
WiFi NINA Click is a powerful standalone WiFi module, equipped with the state-of-the-art NINA-W132 module from u-blox, that can be easily configured with the u-blox s-center software, using AT commands. WiFi NINA click offers a complete WiFi stack, it is really easy to use and provides a simple way to build secure IoT applications. This WiFi module...
Pressure 21 Click is a compact add-on board that contains a board-mount pressure sensor. This board features the BMP581, an absolute barometric pressure sensor from Bosch Sensortec. The BMP581 provides a relative accuracy of ±6Pa and typical absolute accuracy of ±30Pa with ultra-low noise, low power consumption, and temperature stability alongside...
2x5W AMP Click is a compact add-on board that amplifies the audio input to the desired level. This board features the TDA7491LP, a 2x5 watt dual BTL class-D audio amplifier from STMicroelectronics. It can produce 5W + 5W continuous output power with high efficiency (90%) over a single power supply. Four selectable fixed gain settings are available to the...
MP3 2 Click is an audio decoder expansion board with on-board microSD card slot, that enables you to create your personal audio playback system. It holds the KT403A,a SOC chip solution with intergraded MCU, hardware audio MP3/WAV decoder and DSP, from Shenzhen Qianle Microelectronics Technology Co. Ltd. All the mentioned integrated hardware components...
8800 Retro Click is a compact add-on board that simplifies the control of multiple LEDs. This board features the AS1115, compact LED driver for 8x8 display screen programmed via a compatible 2-wire I2C interface from ASM-AG. The AS1115 includes an integrated BCD code-B/HEX decoder, multiplex scan circuitry, segment and display drivers, and 64-bit memory....
GNSS 2 Click is a compact add-on board that provides fast positioning capability. This board features the L76, an extremely compact GNSS module from Quectel Wireless Solutions. It is a concurrent GNSS receiver with multiple GNSS systems and provides simultaneous GPS, GLONASS, BeiDou, Galileo, and QZSS open-service L1 reception capability. Combining...
Hexiwear Workstation expands the functionality of Hexiwear, your favorite IoT tool In the light of Hexiwear’s global success, we decided to make a full-featured development board that expands the functionality of your favorite IoT tool. The Hexiwear Workstation is the next step in rapid IoT prototyping. Note: Hexiwear is not included in the package....
Loading
Load more
Loading
