Filter Product By
Slide and select filter/s
Filtered by
The RS485 5 Click is a Click board™ equipped with the MAX485, low-power, slew-rate-limited transceiver for RS-485 and RS-422 communication, from Analog Devices. This device supports half-duplex RS-485 communication and can be used as an interface between the TTL level UART and the RS485 communication bus. Thanks to the low power consumption and reduced...
UVC Click is an ultraviolet sensing board which complements UVC Light Click for a ultimate ultraviolet solution. The board is based on GUVC-T21GH ultraviolet sensor from GenUV, capable of measuring UVC spectrum in the range of 220nm up to 280nm and light intensity from 0mW/cm² up to 9.3mW/cm². With high sensitivity and good solar blindness, it can be a...
The EasyBee3 Board includes the MRF24J40MA module used to connect your development board to wireless 2.4 GHz IEEE 802.15.4 network easily. The module communicates with microcontrollers via a Serial Peripheral Interface (SPI).
SpeakUp 2 Click is a compact add-on board providing an offline speech recognition solution. This board features the FT900Q, a microcontroller from FTDI Chip. The SpeakUp 2 Click can be set to recognize up to 100 voice commands and have the FT900Q carry them out instantly. The FT900Q, which has stored voice commands, compares them with those received from...
Hi-brightness RGB LED matrix panel, with 1024 RGB LEDs arranged in a 32x32 grid on the front on a 5mm grid, total size 160x160mm. Comes with one IDC cable and a power cable.
CLICKER 4 for STM32 All the inventions waiting to happen... CLICKER 4 for STM32 is a compact development board designed as a complete solution, you can use it to quickly build your own gadgets with unique functionalities.
PIC18F8520 microcontroller. Featuring nanoWatt technology, it has up to 10 MIPS operation, 128K bytes of linear program memory, 3840 bytes of linear data memory, and lot of internal modules.
UV Click is a compact add-on board that alerts users of excessive ultraviolet radiation levels. This board features the ML8511A, an ultraviolet light sensor suitable for acquiring UV intensity indoors or outdoors from Rohm Semiconductor. The ML8511A is equipped with an internal amplifier converting photocurrent to voltage depending on the UV intensity...
SRAM Click is a compact add-on board that contains highly reliable nonvolatile memory. This board features Microchip’s 23LC1024, a 1Mbit serial SRAM with each memory cell organized as 128k words of 8 bits each. The serial SRAM provides fast access, infinite read and writes cycles to the memory array, and three operating modes for reading and writing data....
The SmartGPS is a development tool that will help you understand GPS technologies. Connect GPS (Global Positioning System) to your PC or development board using the LEA-6S module. The intuitive design of SmartGPS guides you through the process of learning GPS.
The BIG8051 development system supports 100-pin Silabs 8051 microcontrollers. It comes with the c8051f040 microcontroller. The system is delivered with a Silabs USB 2.0 programmer and many peripheral modules such as Serial Ethernet, DAC, ADC etc.
The Digital Potentiometer Board includes a SPI Interfaced single-channel digital potentiometer MCP41010. The board enables you to set potentiometer values from 0 to 10 kΩ. It comes with many simple and ready-to-use examples.
Click BoosterPack 2 is an extension for Texas Instruments LaunchPads™ with the current BoosterPack Pinout Standard. It has two mikroBUS™ host sockets onboard, for simple and easy integration of 1645 Click boards™ with a LaunchPad™.
PHT Click is a compact add-on board that contains a PHT combo sensor. This board features the MS8607, a digital combination sensor providing 3 environmental measurements all-in-one: pressure, humidity, and temperature from TE Connectivity. This sensor is based on leading MEMS technologies, provides factory-calibrated PHT data available over an I2C serial...
USB to I2C Click is an adapter add-on board with a general-purpose USB master to I2C/UART serial interface. This board features the FT260 from FTDI, an interface device controller that provides a bridge between standard USB Human Interface Device (HID) class drivers and an I2C or UART slave devices. The FT260Q is highly-integrated with a USB 2.0-compliant...
Accel 3 Click is a compact add-on board that contains an acceleration sensor. This board features the H3LIS331DL, a low-power, high-g 3-axis digital accelerometer from STMicroelectronics. This MEMS motion sensor features ultra-low power operational modes that allow advanced power saving, smart sleep-to-wakeup functions, and shock detection with a 1000g...
RTC 7 Click is a real time clock module which has an extremely low power consumption, allowing it to be used with a single button cell battery or a super capacitor, for an extended period of time. The MAX31341B IC built on the RTC 7 click is able to output the time in the binary coded decimal (BCD) format. Integrated, factory calibrated XTAL operating at...
Click shield for Pi Pico The ideal solution for combining Raspberry Pi Pico board with Click boards™ Start your project development with our Click Shield for Pi Pico fast and easy. The Raspberry Pi Pico combined with the mikroBUS™ sockets provides you immediate access to hundreds of Click boards™ in our offer, allowing you to create a limitless number...
The R2R DAC Board features an on-board digital-to-analog converter R2R that uses R/2R-network and rail-to-rail operational amplifier MCP6284 (450 uA, 5 MHz). The board is connected to a prototype device via an on-board IDC10 connector.
Flame Click is a compact add-on board providing a fire detection solution. This board features the PT334-6B, a silicon phototransistor covered in black epoxy sensitive only to infrared light from Everlight Electronics. Based on a phototransistor, this flame detector has a faster reaction time than smoke or heat detectors, which can identify smokeless...
The RTC2 PROTO Board allows you to connect a prototype device to a Real-Time Clock (RTC) using DS1307. As soon as you establish connection you are ready to keep track of real time. There is also an on-board battery for power supply backup.
9DOF Click is a compact add-on board that contains a 9-axis inertial measurement unit. This board features the LSM9DS1, an inertial measurement module from STMicroelectronics that combines a 3D accelerometer, a 3D gyroscope, and a 3D magnetometer into a single solution. It outputs 16-bit resolution so-called nine degrees of freedom data (3-axis...
USB Connector Board features a USB connector that allows easy connection between a prototype device and USB devices.
Joystick Click is a compact add-on board representing a smart navigation key concept based on contactless magnetic movement detection. This board features AS5013 and N50P105, a miniature magnetic joystick module, and a complete hall sensor IC both from ams AG. The two-dimensional linear encoder AS5013, mounted on the bottom side of this Click board™,...
Loading
Load more
Loading
