Hall Current Click is a compact add-on board that contains a precise solution for AC/DC current sensing. This board features the TLI4970-D050T4, a 16-bit digital SPI output (13-bit current value) coreless magnetic current sensor designed for the current range of ±25A from Infineon Technology. A differential measurement principle allows effective stray...
This Smart Meter rubber antenna with vertical polarization is an excellent choice for extending the range of 169Mhz wireless products like M-BUS RF Click board™.
8x8 Y click is a 64 LED matrix display Click board™, composed of SMD LEDs organized in 8 rows by 8 columns. It has a digital brightness control in 16 steps, it can control every LED in the display matrix independently, it blanks the display on power up to eliminate glitches and it requires a single resistor to control the current through all the LEDs at...
The ADC PROTO Board allows you to add A/D conversion feature to your prototype device. It includes a 12-bit ADC MCP3204 with 4 inputs and 4.096 Voltage Reference. The board can be used with all MCUs with SPI communication support.
PIXI™ click is equipped with MAX11300 IC from Analog Devices, which features versatile, proprietary PIXI™ technology - it is the industry's first configurable 20-channel mixed-signal data converter. Besides the 12bit multichannel SAR ADC and buffered DAC, it also features one internal and two external temperature sensors for tracking the junction and the...
Illuminance Click is a compact add-on board that mimics how humans perceive light. This board features ams OSRAM TSL2583, a very-high sensitivity light-to-digital converter that transforms light intensity to a digital signal output capable of the direct I2C interface. It combines one broadband photodiode (visible plus infrared) and one infrared-responding...
CAN Isolator Click is a compact add-on board that provides isolated CAN communication. This board features the ADM3053, a signal and power-isolated CAN transceiver with an integrated isolated DC-to-DC converter from Analog Devices. It creates a fully isolated interface between the CAN protocol controller and the physical layer bus, achieving data rates up...
PWM Driver Click is a compact add-on board that brings the pulse-with-modulation (PWM) control of high loads. This board features the Si8711CC, a 5kV LED emulator input, open collector output isolator from Skyworks. The PWM Driver Click can control loads from 3 up to 30V DC and up to 50 watts of current from the external power supply. The higher loads are...
The Port Expander Board is an accessory board that includes a 16-bit I/O expander MCP23S17. This expander employs SPI(tm) clock up to 10 MHz. The board is ideal for expanding number of microcontroller pins on your prototype device.
The Serial LCD Adapter Board is used to connect an LCD with your development board or prototype device via serial communication. It includes an on-board serial port expander MCP23S17 as well as a potentiometer used to adjust LCD contrast.
RTC 5 Click is a compact add-on board that measures the passage of real-time. This board features the MCP79510, a register-configurable real-time clock/calendar from Microchip. The MCP79510 provides information like seconds, minutes, hours, days, months, years, and dates based on a 32.768kHz quartz crystal through an SPI serial interface to transmit time...
The DIP to PLCC44 Adapter Board is an effective and low-cost board for DIP to PLCC44 conversion. You just have to plug a PIC into this adapter. After the programming process is finished, you can remove it from the adapter.
PAC1954 Click is a compact add-on board that contains an energy monitoring solution. This board features the PAC1954, a four-channel DC power/energy monitor from Microchip Technology. It uses real-time calibration to minimize offset and gain errors with no input filters required for this device. One major feature of the PAC1954 design is a set of digital...
If you need a battery power supply, we have a great and compact solution. This rechargeable 3000mAh 3.7V battery can deliver even more.
XPRO-Adapter Click is an adapter board for connecting Microchip Xplaned Pro expansion boards with hundreds of mikroBUS based host boards. The Xplaned Pro expansion header is standardized 20 pin connector which is allowing connection of many Microchip/exAtmel expansion boards. This click also has duplicated Xplaned Pro and mikroBUS headers if reconfiguring...
FRAM 2 click carries a ferroelectric RAM module. Ferroelectric RAM, also known as FRAM, is a non-volatile memory type, with characteristics comparable to much faster DRAM memory modules. It offers much faster alternative to common serial FLASH and EEPROM modules, which use the conventional technologies. FRAM 2 click uses the CY15B104Q, a 4 Mbit serial...
dsPIC30F4013 is a dsPIC30F Motor Control 16-bit Digital Signal Controller.
Flash 5 Click is a perfect solution for the mass storage option in various embedded applications. It features the W25N01GVZEIG/IT (1G-bit) Serial SLC NAND Flash Memory from Winbond which provides a storage solution for systems with limited space, pins and power. The W25N SpiFlash family incorporates the popular SPI interface and the traditional large NAND...
Vibra Sense Click is a compact add-on board that provides vibration and shock detections to your application. This board features the 801S, a shock sensor from Sencera. The micro shock detection this Click board™ offers is not limited by direction. The unique round gold-plated housing of the 801S sensor consists of a spring wound around a metal pin and...
TFT PROTO 5" Capacitive carries the 800x480 RVT50AQTNWC00 TFT screen. The SSD1963 display controller drives the TFT display, with a 1215K byte buffer that supports up to 864x480 at 24bpp displays.
Hi-brightness RGB LED matrix panel, with 1024 RGB LEDs arranged in a 32x32 grid on the front on a 6mm grid, total size 190x190mm. Comes with one IDC cable and a power cable.
The SerialFlash Board provides additional memory space for your MCU. The EN25F80 circuit provided on the board enables the MCU to use additional 8Mbit flash memory via a Serial Peripheral Interface (SPI).
EMG Click is a compact add-on board that checks the condition of nerves and muscles. This board features two MCP609s, micropower CMOS operational amplifiers from Microchip. The EMG Click is an EMG machine on a Click board™ and requires little setup. The final measurement results can be displayed as a graphical presentation using MikroPlot, a free Windows...
The Serial 7-seg Display 2 Board enables you to use a 7-segment LED display. It features an on-board SPI interface, LED display driver MAX7219 and 8 common-cathode LED displays. The board is connected to a device via an on-board IDC10 connector.
Loading
Load more
Loading