Filter Product By
Slide and select filter/s
Filtered by
EasyInput is an accessory board used for providing digital logic input to desired IDC10 PORT header. It features tri-state DIP switch for 8 PORT pins.
Single use adhesive ECG/EMG electrode (48 X 34mm) with stud adapter.
EEPROM 3 click provides 2 Mbit (2,097,152 bits) of Electrically Erasable Programmable Read Only Memory, organized in bytes. In other words, this click board™ is an EEPROM memory medium with the capacity of 256 KB. The used EEPROM module has outstanding endurance, with 1,000,000 write cycles and data retention period of over 100 years. The EEPROM module on...
Fiber Opt Click is a compact add-on board that adds fiber-optic communication to your design. This board features one IF-D91, a fiber-optic photodiode, and one IF-E97, a fiber-optic LED, both from Industrial Fiber Optics. It provides a plastic optic connection feature over a plastic fiber cable with typical data rates of up to 512Kbps, and a maximum of up...
mikroBasic PRO for PIC Buy now Download
Clicker 4 for STM32F407VG All the inventions waiting to happen... Clicker 4 for STM32F407VG is a compact development board designed as a complete solution, you can use it to quickly build your own gadgets with unique functionalities.
The Serial 7-seg Display Board features an onboard SPI interfaced, LED display driver MAX7219 and 4 common-cathode LED displays. The board is connected to a prototype device via an IDC10 connector and comes with examples.
EVE Click is an adapter add-on board that provides display, audio, and touch control from a single solution. This board features the FT800, an easy-to-use graphic controller from FTDI. It provides an embedded video engine (EVE) with widget support, built-in graphics operations, a graphic controller, audio processing, and a resistive touch controller with...
The Potentiometer Board is an accessory board offering an effective, low-cost solution for testing analog inputs on a prototype board.
XBee Click is a compact add-on board providing wireless connectivity to end-point devices in ZigBee mesh networks. This board features the XB24CZ7PIS-004, a low-power Digi XBee® RF module delivering superior performance and interference immunity from Digi International. With its ultra-sensitive receiver, the XB24CZ7PIS-004 operates in the 2.4GHz ISM band...
8051-Ready Board The 8051-Ready Board is the best solution for fast and simple development of 20-, 44-pin DIP and PLCC44 8051 microcontroller applications. It includes connectors for connecting the 8051prog2 in-system stand-alone programmer that enables you to program MCUs without any other additional device. There are also IDC10 connectors linked to the...
The PT MCU CARD 2. It contains PIC32MX460F512L microcontroller with on-chip peripherals and is a great choice for both beginners and professionals. After testing and building the final program, this card can also be taken out of the board socket and used in your final device.
Hydro Probe Click is a capacitive soil moisture sensor based on capacitive changes that are used to detect the volumetric water content in the soil. Water detection is achieved by using function oscillator MIC1557 and ADC converter MCP3221 from Microchip, which allow you to convert moisture presents to the digital value. Compared to resistant soil...
The SMD Gray mikroBUS™ socket has a stronger design for easier interfacing with Click boards™. It features horizontal supports between 8-pin connectors and a 45° chamfered lower edge, ensuring a perfect fit and alignment. All pins are clearly labeled for secure placement. These sockets are packaged in plastic anti-static shipping tubes for safe...
GPS 3 Click is a compact add-on board that provides users with positioning, navigation, and timing services. This board features the L80, a GPS receiver module with a patch antenna from Quectel, equipped with an MTK positioning engine. Combining an advanced AGPS called EASY™ and proven Alwayslocate™ technology, the L80 achieves the highest performance and...
This is the first MCU card for EasyMx PRO v7 to carry an ARM® Cortex®-M7 microcontroller. Specifically, the STM32F746-100 microcontroller with on-chip peripherals. After testing and building the final program, this card can also be taken out of the board socket and used in your final device.
WiFi 5 Click is a compact add-on board that offers low-power wireless connectivity for any IoT application. This board features the GS1500M, an 802.11b/g/n low-power WiFi module from Telit Cinterion. The GS1500M works at 2.4GHz and comes equipped with a trace antenna alongside a small u.Fl connector, allowing an external antenna to be used for improved...
The M-Bus Master is a Click board™ is complete solution for a master node in M-Bus networks. The M-Bus ("Meter-Bus") is a new European standard for remote reading of heat meters and it is also usable for all other types of consumption meters as well as for various sensors and actuators. Given all the features these elements offer, the M-Bus Master click...
DC Motor Click is a compact add-on board with a brushed DC motor driver. This board features the DRV8833, an H-bridge motor driver with current-control PWM circuitry from Texas Instruments. The DRV8833 has two integrated H-bridges connected in parallel for double the current of a single H-bridge rated for an operating voltage range from 3V to 10V with...
Jacketed communication 1mm fiber optic cable - 5 meters
USB Charger Board is a full-featured battery charger with MCP73832...
RTC 9 Click is a real-time clock module that has an extremely low power consumption, allowing it to be used with a single button cell battery, for an extended period of time. This board features the M41T82, real-time clock (RTC) with battery switchover, from ST Microelectronics. It features factory-calibrated accuracy of ±5 ppm typically, automatic...
The mikroDrive Board features a high-current Darlington arrays ULN2803AN and a jumper for power supply selection. The board provides an interface between a low-level logic circuitry of your prototype board and multiple peripheral power loads.
Hexiwear Docking Station is, as its name describe, a connection and expansion board for Hexiwear development platform. This board enables you to add functionally to your system and connect over 750 Click boards to your Hexiwear device. The board has 50 pin male connector for easily adding Hexiwaer development board. It also features JTAG connector,...
Loading
Load more
Loading
