Filter Product By
Slide and select filter/s
Filtered by
2x10 Female Header Socket
MCP2003B Click is a compact add-on board with a physical interface to automotive and industrial LIN systems compliant with the LIN Bus Specification Revision 2.2, SAE J2602, and ISO 17987. This board features the MCP2003B, a LIN transceiver from Microchip. The LIN, which stands for a Local Interconnect Network, is used in conjunction with the CAN...
Need more additional memory than EEPROM? We’ve got just the thing for you. The MMC/SD board features an MMC/SD card slot for MMC or SD cards...
4G LTE click is an LTE Cat 1 / 2G multimode cellular network solution, featuring the compact LARA-R2 series modem from Trasna. This module supports up to three LTE bands and GSM bands. It also features a full range of options for the high speed cellular networking and communication, such as the network indication, full embedded TCP/UDP stack, HTTP and...
NFC Tag Click is a compact add-on board that provides NFC/RFID tag reading and writing capabilities. This board features the M24SR64-Y, a dynamic NFC/RFID tag IC with 64Kbit EEPROM from STMicroelectronics. The RF protocol is compatible with both NFC Forum Type 4 Tag and ISO/IEC 14443 Type A. There are three ways to operate NFC Tag Click: from an I2C...
Relay 2 click is a dual relay click board™, equipped with two single-pole solid state relays (SSR), built with the patented OptoMOS® technology. These SSR devices allow reasonably high current, up to 2A and voltage up to 30V (peak-to-peak). These relays also allow very fast switching time, thanks to the absence of any moving parts inside of them. Compared...
Single use adhesive ECG/EMG electrode (48 X 34mm) with stud adapter.
Ready for AVR Board Ready for AVR Board is the best solution for fast and simple development of microcontroller applications using 40-pin AVR MCUs. It comes with ATmega16 connected to 8MHz crystal oscillator. It contains four IDC10 headers for all available microcontroller ports, USB-UART module, prototyping area and a power supply circuit. Board is...
OLED B Click is a compact add-on board that lets you add a small but bright and crisp display to your design. This board features the MI9639BO-B2, a 96x39px light blue monochrome passive matrix OLED display from Multi-Inno Technology. The display on OLED B Click board™ is 19.3x7.8mm with an integrated OLED controller, the SSD1306. This controller has...
LTE IoT 5 Click is an add-on board with a compact and cost-effective secure-cloud multi-band solution designed for IoT applications. This board features the SARA-R510M8S, a cellular module that supports LTE Cat M1/Cat NB2 bands with integrated high-performance standard precision M8 GNSS receiver for global position acquisition from Trasna. Equipped with...
The PICFlash Experimental Board makes the process of programming MCUs easier. There are 8-, 10-, 14-, 18-, 28- and 40-pin DIP sockets provided on the board. There is also an on-board 40-pin ZIF Socket for easy handling of microcontroller.
BLE TINY Click is a compact add-on board that provides BLE connectivity for any embedded application. This board features the DA14531MOD, SmartBond TINY module based on the world’s smallest and lowest power Bluetooth 5.1 System-on-Chip (SoC) from Renesas. This Click board™ is effectively future-proofed due to a combination of Bluetooth 5.1 compliance and...
3G-EA click is a versatile cellular network communication solution, featuring the compact 3G UMTS/HSPA Quectel UG95 module. This module features a full set of options for the cellular networking and communication, such as the network indication, embedded TCP/UDP stack, HTTP/HTTPS stack, full GSM/GPRS/EDGE implementation, UMTS/HSDPA/HSUPA protocol...
Add a Real-Time Clock (RTC) to your applications using the RTC2 Board. It features a serial real-time clock (RTC) DS1307 that is a low-power clock/calendar with 56 bytes of NV SRAM. There is also an on-board battery providing power supply backup.
MINI-M4 for Tiva™ C Series MINI-M4 for Tiva™ C Series is a small ARM® Cortex™-M4 development board containing Tiva™ C Series TM4C123GH6PM microcontroller. It perfectly fits into a standard DIP40 socket. Board is equipped with 16MHz SMD crystal oscillator, and 32.768KHz crystal which can be used for internal hibernation module. It has reset button and...
MINI-32 for PIC32MZ MINI-32 for PIC32MZ is a small PIC32 development board containing the PIC32MZ1024EFH064 microcontroller (1 MB Live-Update Flash and 512 KB SRAM) with FPU from Microchip. This compact and powerful development board is designed to work as a standalone device or as an MCU card in DIP40 socket. MINI-32 for PIC32MZ development board...
FFC flat cable 24-pin, 24cm - Used for connecting mikromedia HMI board to external electronics
ATA6563 Click is a compact add-on board that provides an interface between a controller area network (CAN) protocol and the physical two-wire CAN bus. This board features the ATA6563, a high-speed CAN transceiver with standby mode from Microchip. The transceiver is designed for high speeds of up to 5Mbps and provides differential transmit and receive...
The three-axis accelerometer board features a small, thin, low-power, complete 3-axis accelerometer ADXL330 with signal conditioned voltage outputs, all on a single monolithic IC.
TFT Color Display with Touch Screen (5'') is a color active matrix thin film transistor(TFT) liquid crystal display (LCD)
The Default MCU card that comes with the EasyMx PRO™ v7 for STM32® package is shown on Figure 1. It contains STM32F107VCT6 microcontroller with on-chip peripherals and is a great choice for both beginners and professionals.
The MMC/SD Card PROTO Board enables your prototype board to be connected to Multi Media and Secure Digital Cards. There is an MMC/SD card socket provided on the board used for placing these cards.
The SHT1X PROTO Board is used to connect your prototype device with a temperature/humidity sensor. It features the SHT11 sensor that uses a 2-wire serial interface, thus enabling you to measure temperature and humidity. Note: not recommended for new design.
Clicker 4 for STM32F407VG All the inventions waiting to happen... Clicker 4 for STM32F407VG is a compact development board designed as a complete solution, you can use it to quickly build your own gadgets with unique functionalities.
Loading
Load more
Loading
