for STM32F2 CAPACITIVE FPI with frame Rapid development of multimedia and gui-centric applications BUILD GREAT GUI IN NO TIME Rich with peripherals Mikromedia 4 for STM32F2 CAPACITIVE FPI with frame is not limited to multimedia-based applications only. USB, digital motion sensor, battery charging functionality, SD card reader and much more...
eFuse 3 Click is a compact add-on board that contains an electronic eFuse. This board features the NIS6150, a resettable fuse that can significantly enhance the reliability of a USB application from both catastrophic and shutdown failures from onsemi. It is designed to buffer the load device from the excessive input voltage, which can damage sensitive...
SPI Isolator 6 Click is a compact add-on board representing a digital isolator optimized for a serial peripheral interface. This board features the MAX22345, a fast, low-power 4-channel digital galvanic isolator from Analog Devices. This device comes with a maximum data rate of 200Mbps and transfers digital signals between circuits with different power...
Rotary B 2 Click is a compact add-on board that allows you to add a precision input knob to your design. This board features the TLC5925, a low-power 16-channel constant-current LED sink driver from Texas Instruments that, combined with a high-quality rotary encoder from ALPS, the EC12D1564402, allows you to add a precision input knob to your design. It...
Grid-EYE 2 Click is a compact add-on board designed for thermal imaging and motion detection applications. This board features the AMG883543, an infrared array sensor from Panasonic with a 90° viewing angle and an 8x8 pixel matrix that measures temperatures from 0°C to 80°C with a resolution of 0.25°C. The sensor can detect objects up to 5 meters away and...
Brushless 18 Click is a compact add-on board that controls three-phase sensorless brushless DC (BLDC) motors. This board features the ATmega8A, an 8-bit microcontroller from Microchip, ensuring precise and efficient motor control. This board features six high-performance N-channel MOSFETs (STL120N4F6AG) for switching power from an external source to the...
RNG 2 Click is a compact add-on board used for secure and certified random number generation in cryptographic systems. It is based on the RNG90 random number generator from Microchip, compliant with NIST SP 800-90A/B/C standards. The board generates 256-bit random numbers with a security strength of 128 bits, validated through a NIST-certified lab, and...
LV18F v6 64-100-pin Ethernet TQFP MCU Card Empty PCB
Not a programming expert, but you have the talent to build a great user interface? Don't worry! Visual TFT will do the hard job for you. You just focus on the design of you TFT GUIs, and the software will handle the rest
The essential development kit for all your graphic interface projects Open the box full of wonders. Start development right away, everything you could need is there. It’s the perfect toolbox - the mikromedia workStation v7 is the best development environment for mikromedia boards – your stepping stone. The Visual TFT software and compiler license will...
Buck 10 Click is a high-efficiency step-down converter which provides a highly regulated output voltage derived from the connected power source, rated from 4V to 18V. The regulated output voltage can be selected between two values: 3.3V and 5V. These are voltage values that are most commonly used in many embedded designs. This click is based around an...
Hall Switch 2 Click is a compact add-on board that represents a magnetic field-activated dual-relay Click board™. This board features the MHA100KN, a high-performance, low-power Hall-Effect sensor from MEMSIC. This Hall switch is a fully integrated CMOS IC that outputs a high-low signal following magnetic field changing. It works with a magnet and detects...
Fusion for ARM v8 is a development board for ARM architecture devices. It contains many on-board modules necessary for device development, including multimedia, Ethernet, USB, and other.
LTE Cat.4 3 Click is a compact add-on board representing a multi-band and multi-mode solution, offering universal connectivity and reliable performance. This board features the LARA-L6004D-01B, an LTE Cat 4 module in the smallest form factor from u-blox. The module supports an LTE Cat 4 FDD and an LTE Cat 4 TDD radio access technology (RAT), with a 3G...
BATT Boost Click is a compact add-on board that expands a coin battery cell's lifetime and current capability, like the CR2032 and lithium thionyl batteries. This board features the NBM5100A, a coin-cell battery life booster with adaptive power optimization from Nexperia. It is a battery energy management device designed to maximize usable capacity from...
BM78 Click is a compact add-on board designed to integrate dual-mode Bluetooth wireless capability into various projects. This board features the BM78, a fully certified 2.4GHz Bluetooth (BR/EDR/LE) wireless module from Microchip. The BM78 module includes an on-board Bluetooth stack, power management subsystem, 2.4GHz transceiver, and RF power amplifier....
DAC 18 Click is a compact add-on board for converting general-purpose input to PWM signals. This board features the DAC539G2-Q1, a 10-bit smart DAC from Texas Instruments. The board offers two key output channels: one for digital-to-analog conversion (OUT1) and the other for voltage-to-PWM conversion (OUT0) supporting triangle or sawtooth waveforms. It...
SiBRAIN Card is a standardized add-on board, which allows very simple installation and replacement of the microcontroller unit (MCU) on a development board equipped with the SiBRAIN socket. By introducing the new SiBRAIN standard, we have ensured the absolute compatibility between the development board and any of the supported MCUs, regardless of their...
Accel 34 Click is a compact add-on board for precise motion detection and monitoring applications. This board features the ADXL382-2, a wide bandwidth 3-axis MEMS accelerometer from Analog Devices. It offers user-selectable measurement ranges of ±15g, ±30g, and ±60g with high sensitivity, low noise density, and efficient power consumption, making it...
Charger 24 Click is a compact add-on board designed to provide USB-C charging for single-cell lithium-ion or lithium-polymer batteries in portable applications. It is based on the MAX77751, a highly integrated autonomous charger IC from Analog Devices with built-in USB Type-C detection and power management features. The board features a synchronous...
The essential development kit for all your graphic interface projects Open the box full of wonders. Start development right away, everything you could need is there. It’s the perfect toolbox - the mikromedia workStation v7 is the best development environment for mikromedia boards – your stepping stone. The Visual TFT software and compiler license will...
Loading
Load more
Loading