Filter Product By
Slide and select filter/s
Filtered by
POT 5 Click is a compact add-on board with accurate selectable reference voltage output. This board features the PDB081-P10-103B1, a high-quality 8mm micro rotary 10k potentiometer from Bourns. The PDB081-P10-103B1 potentiometers operate over a wide temperature range, withstanding 50V maximum voltage. This rotary potentiometer offers 5Ω maximum...
PRESS Click is a compact add-on board that contains a board-mount pressure sensor. This board features the ILPS28QSW, an absolute digital output barometer from STMicroelectronics. It is a dual full-scale sensor with a measuring range of 260 up to 4060hPa. In addition, it comes with a Qvar detection ability, which is an electric charge variation detection...
for STM32F7 Resistive Rapid development of multimedia and gui-centric applications BUILD GREAT GUI IN NO TIME Rich with peripherals Mikromedia 5 for STM32F7 Resistive is not limited to multimedia-based applications only. USB, Ethernet, WiFi and RF connectivity options, digital motion sensor, battery charging functionality, piezo-buzzer,...
Click Shield for FRDM-MCXN947 Expand your horizons with the Click Shield for FRDM-MCXN947! Enhance the FRDM-MCXN947 board's capabilities using mikroBUS™ sockets to access a wide array of Click boards™ instantly. Unlock new possibilities and innovate without limits with just one host board.
RGB Ring Click is a compact add-on board designed for dynamic and colorful lighting applications. This board features eight RGB LEDs (WL-ICLED 1312020030000) from Würth Elektronik, incorporating integrated circuits to control color mixing precisely. This board supports individual control of each LED's red, green, and blue components with single-wire...
for STM32F2 CAPACITIVE FPI with frame Rapid development of multimedia and gui-centric applications BUILD GREAT GUI IN NO TIME Rich with peripherals Mikromedia 3 for STM32F2 CAPACITIVE FPI with frame is not limited to multimedia-based applications only. USB, digital motion sensor, battery charging functionality, SD card reader and much...
MCU Card is a standardized add-on board, which allows very simple installation and replacement of the microcontroller unit (MCU) on a development board equipped with the MCU Card socket. By introducing the new MCU Card standard, we have ensured the absolute compatibility between the development board and any of the supported MCUs, regardless of their pin...
Do you know a feeling when something is so good you feel like it's too good to be true? Planet Debug is one of our "out of this world" solutions for embedded engineers. This one is for everyone who loves wearing modern designs with bold statements. This T-shirt is 100% cotton, in light blue color with the "I'M OUT OF THIS WORLD" sign on the front and the...
Step Down 5 Click is a compact add-on board that converts a higher voltage into a lower voltage level. This board features the TPS628510, a high-efficiency, easy-to-use, synchronous step-down DC/DC converter from Texas Instruments. The TPS628510 can provide up to 500mA output current with an input voltage ranging from 2.7V to 6V, specifically designed for...
Internal Quad Band Active PWB Antenna (W3501) is a small but powerful flat patch multiband antenna designed for GSM 850/GSM 900/DCS 1800 /PCS 1900 frequency range for satellite tracking, ISM, and wireless applications. Measuring just 25x87mm with its flexible PCB thickness of 0.2mm, this antenna is incredibly efficient and has a nominal impedance of 50Ω....
Nano Power 3 Click is a compact add-on board that steps down voltages from its input (supply) to output (load). This board features the RPL-3.0-R, a buck converter with an integrated inductor from Recom Power. This thermally-enhanced converter uses, as input, voltage from 4 up to 18VDC, thus allowing 5V and 12V supply rails to be used. The output voltage...
Brushless 10 Click is a compact add-on board that provides precise control over brushless DC motors. This board features the TC78B016FTG, a 3-phase sine-wave PWM driver from Toshiba Semiconductor. The TC78B016FTG features Intelligent Phase Control for automatic motor phase adjustment, eliminating manual calibration, supporting an external power supply...
LTE IoT 17 Click is a compact add-on board designed for low-power, long-range cellular communication in IoT applications. This board features the SIM7070E, a multi-band LTE module from SIMCom that supports the European/Australian region's Cat-M, Cat-NB, and GSM modes. Key features include a maximum 589kbps downlink and 1.1Mbps uplink rate, support of...
Temp ISO Click is a compact add-on board for accurate and isolated temperature measurements in high-voltage environments. This board features the ISOTMP35-Q1, an automotive-grade isolated temperature sensor with analog output from Texas Instruments. This sensor integrates a robust isolation barrier with a withstand voltage of up to 3000VRMS, a linear...
BT840 Click is a compact add-on board that provides advanced Bluetooth Low Energy (BLE) connectivity for modern IoT applications. This board features the BT840 module from Fanstel, based on the nRF52840 SoC from Nordic Semiconductor, equipped with a Cortex M4F MCU, 1MB Flash, 256KB RAM, and an ARM® TrustZone® Cryptocell-310 co-processor for enhanced...
Ambient 24 Click is a compact add-on board used to precisely measure ambient light intensity in various lighting conditions. This board features the VEML4031X00, a high-resolution 16-bit digital ambient light sensor from Vishay Semiconductor. This sensor features a highly sensitive photodiode, a low-noise amplifier, and an advanced 16-bit A/D converter,...
80-pin MCU card with PIC24FJ96GA008
Not a programming expert, but you have the talent to build a great user interface? Don't worry! Visual TFT will do the hard job for you. You just focus on the design of you TFT GUIs, and the software will handle the rest.
Buck 11 click is a high-efficiency step-down converter which provides 3.3V on its output, derived from the connected power supply voltage, in the range from 4.2V to 60V. Buck 11 click is based on the LMR36015, a highly efficient DC-DC step-down converter. In addition, Buck 11 click offers monitoring the stability of the output voltage by employing an...
Balancer 2 Click is an overvoltage protection device for a 2-series cell lithium-ion battery. Click contains two separate overvoltage battery detection circuits and automatic cell imbalance correction. It can be used for various applications, power tools, portable equipment, and instrumentation, to energy storage systems (ESS), while providing the output...
1x8 Female Header Socket SMD (5pcs)
Temp&Hum 19 Click is a compact add-on board that represents temperature and humidity sensing solution. This board features the BPS240, a highly accurate relative humidity and temperature sensor from Bourns. This sensor, characterized by its high accuracy (±2% from 20% to 80%RH (±4% over entire humidity range)) and high resolution, provides 10-bit data...
Step Down 3 Click is a compact add-on board that steps down the voltage from its input to its output. This board features the ST1PS03, a nano-quiescent miniaturized synchronous step-down converter with a load switch from STMicroelectronics. The ST1PS03 can provide up to 400mA output current with an input voltage ranging from 1.8V to 5.5V, specifically...
Vibration ERM Motor 10K RPM 3V (VZ43FC1B5640007) represents the Eccentric Rotating Mass vibration motor (ERM), also known as a pager DC motor, with an offset (non-symmetric) mass attached to the shaft specially designed by Vybronics. This SMD reflow solderable vibration motor draws a maximum of 100mA while producing the highest G force/vibration energy of...
Loading
Load more
Loading
