Filter Product By
Slide and select filter/s
Filtered by
Fusion for PIC v8 is a development board for PIC architecture devices. It contains many on-board modules necessary for device development, including multimedia, Ethernet, USB, and others.
Shutter Click is an adapter Click board™ that can be used to implement an automated capturing function. This Click board™ has one 3.5mm jack connector suitable for a camera connection with which the frame is captured. By combining two mikroBUS™ pins and the VO617A, a high-reliability phototransistor from Vishay Semiconductors used as a camera activation...
Magneto 14 Click is a compact add-on board with an accurate and reliable magnetic device. This board features the MA735, a contactless angle sensor with ABZ, and PWM output from Monolithic Power Systems. The MA735 sensor has a 9-bit to 13-bit resolution of the absolute angle encoder. With its fast data acquisition and processing, it provides accurate...
Hall Current 16 Click is a compact add-on board that contains a precise solution for AC/DC current sensing. This board features the ACS37002, a 400kHz high-accuracy current sensor from Allegro Microsystems. This sensor features pin-selectable gains that can be used to configure the device to one of the four defined sensitivities and corresponding current...
6DOF IMU 23 Click is a compact add-on board for precise motion tracking and measurement. This board features the IIM-20670, a high-performance 6-axis MotionTracking device from TDK InvenSense that integrates a 3-axis gyroscope and a 3-axis accelerometer. The gyroscope offers a full-scale range of up to ±1966 dps with high accuracy, while the accelerometer...
USB-C Sink 4 Click is a compact add-on board designed to enable devices to draw power through the USB Type-C interface. This board features the CYPD3178, a USB Type-C power sink controller from Infineon. This Click board™ includes a controller with an integrated USB Type-C transceiver, load switch control with soft start, and system-level fault...
VCP Monitor 5 Click is a compact add-on board designed for various applications' precise current, voltage, and temperature measurements. This board features the INA700A, a 16-bit digital power monitor from Texas Instruments based on an advanced EZShunt™ technology for high-accuracy sensing. This board handles full-scale current measurements up to...
Empty 64- and 100-pin PIC32 MCU Cards have a very good contact with the board via a two-line connector.
Modern development tools for an architecture with a long legacy – mikroLab for 8051 is a full development solution for Atmel’s line of 8051 MCUs. The kit includes an Easy8051 v6 development board, a mikroC for 8051 compiler license, additional accessories, and a free license for Visual GLCD (valued at $99).
for Kinetis CAPACITIVE FPI with bezel Rapid development of multimedia and gui-centric applications BUILD GREAT GUI IN NO TIME Rich with peripherals Mikromedia 4 for Kinetis CAPACITIVE FPI with bezel is not limited to multimedia-based applications only. USB, WiFi and RF connectivity options, digital motion sensor, battery charging...
Thermo 21 Click is a compact add-on board that provides an accurate temperature measurement. This board features the ADT7301, a high-precision digital temperature sensor from Analog Devices. The ADT7301 houses an on-chip temperature sensor, a 13-bit A/D converter, a reference circuit, and serial interface logic functions in one package. Characterized by...
Expand 12 Click is a compact add-on board that contains a multi-port I/O expander. This board features the MAX7300, a general-purpose I/O expander providing remote I/O expansion for most MCU’s families from Analog Devices. The MAX7300 comes in a 28-port configuration and allows easy addition of I/O through a standard I2C serial interface. Each port is...
LED Stripe 6W is a super bright white LED light strip with a durable and flexible silicone flex hose and DC connector representing an essential element of good lightning. Its DC female connector cable is ideal for quick, easy, and convenient mains connection from your LED strip light setup to your DC power adapter without a need for any soldering or...
With the rise of the popularity of RISC-V, it was not a matter of will we support it. It was just a matter of time. In one of the latest NECTO updates we have added full support for RISC-V architecture. Just like our newest T-shirt says "Everybody plays it safe. We're gonna RISC-V it." It is 100% cotton, in navy blue color, and it comes in various...
Solar Energy 3 Click - 1V8 is a compact add-on board for energy harvesting in low-power applications. This board features the NEH2000BY, an energy-harvesting PMIC from Nexperia. This board also features the AMG-1401C photovoltaic cell, known for its high efficiency of over 20%, even in low and artificial light environments. The NEH2000BY manages energy...
Current 14 Click is a compact add-on board designed for precise current measurement without direct contact. This board features the BM14270, a magnetic current sensor IC from ROHM Semiconductor. It uses a coreless, non-contact magnetic impedance (MI) sensor, ensuring low power loss and accurate current detection. It communicates through a 2-wire I2C...
ATA6501 Click is a compact add-on board for high-speed CAN FD communication in automotive and industrial applications. This board features the ATA6501, a fully integrated CAN FD System Basis Chip (SBC) from Microchip, meeting Grade 0 AEC-Q100 standards. It supports both Classical CAN and CAN FD protocols with data rates up to 5Mbit/s and features an...
Boost-INV click is a very useful DC/DC voltage converter device, as can output both positive and negative voltage, boosted up to 12.78V and -13.95, from a single fixed voltage input. The input voltage can vary between 2.55V to 5.5V, making the Boost-INV click an ideal solution for powering devices with complex, split-rail power supply demands, using only...
for Kinetis CAPACITIVE Rapid development of multimedia and gui-centric applications BUILD GREAT GUI IN NO TIME Rich with peripherals Mikromedia 3 for Kinetis CAPACITIVE is not limited to multimedia-based applications only. USB, digital motion sensor, battery charging functionality, SD card reader and much more expands its use beyond the...
MCU Card is a standardized add-on board, which allows very simple installation and replacement of the microcontroller unit (MCU) on a development board equipped with the MCU Card socket. By introducing the new MCU Card standard, we have ensured the absolute compatibility between the development board and any of the supported MCUs, regardless of their pin...
Stepper 11 Click is a compact add-on board that contains a bipolar stepper motor driver. This board features the TB9120AFTG, a two-phase bipolar stepping motor driver with a clock input interface and a PWM constant-current control system from Toshiba Semiconductor. It supports from full-step to 1/32 steps for less motor noise and smoother control, while...
This one is for all CODEGRIP users but also people who love to wear fun colors. It is this beautiful anchor gray color with the large CODEGRIP logo on the front and the Mikroe logo on the left sleeve. We can say that these T-shirts are one of the favorites among our colleagues - you can catch a lot of us wearing them to work. FEMALE SIZES CHART Size...
Temp-Log 7 Click is a compact add-on board used to measure and record the temperature of an environment over time. This board features the TMP1826, a high-accuracy, 1-Wire® compatible digital output temperature sensor from Texas Instruments with integrated 2-kbit EEPROM. It supports a wide operating temperature range from –20°C to +85°C with its high...
GNSS 17 Click is a compact add-on board for precise and reliable global navigation and positioning. This board features the M20071, an integrated full-function GNSS receiver module from Antenova, which features the MediaTek AG3335MN flash chip. This module can concurrently track multiple GNSS constellations, including GPS, GLONASS, GALILEO, BEIDOU, and...
Loading
Load more
Loading
