Reduce the development time considerably with mikroC, mikroBasic or mikroPascal for PIC compiler and EasyPIC v7 development system. Buy Easy Start Kit-PIC to get these goodies at reasonable price.
WiFi 3 Click is a compact add-on board that provides a low-power WiFi solution to a host MCU. This board features the ESP8266MOD, a WiFi module with a built-in TCP/IP protocol stack from Ai-Thinker. This fully integrated module uses the IEEE802.11b/g/n standard in the 2400-2483.5MHz ISM frequency band that can work in Station, Soft Access Point, and...
Li-Polymer Battery 3.7V 130mAh - power your device.
Nano GPS Click is a compact add-on board that provides fast positioning capabilities. This board features the Nano Hornet ORG1411, a complete SiP GPS Patch-on-Top (PoT) module from OriginGPS. It is the industry’s smallest GPS module with an integrated patch antenna. This compact module features multi-channel GPS, with SBAS, QZSS, and other regional...
Altitude Click is a compact add-on board that allows height measurement of an object or point related to sea level or ground level. This board features the MPL3115A2, a MEMS pressure sensor providing accurate pressure/altitude and temperature data measurements from NXP Semiconductors. The MPL3115A2 provides 20-bit pressure/altitude and 12-bit temperature...
Battery Boost shield is an extension board pin-compatible with all mikroMMB boards from mikroElektronika that enables autonomous power supply using 2 x AAA batteries. Board features a compact monolithic integrated circuit MCP1640 that provides +4.0V power supply voltage.
PROTO Connect Board is used to connect a prototype device to external modules via a screw terminal. External connection is enabled via the screw terminal. Components available on the board are clearly marked, which makes connection easy.
Expand 2 Click is a compact add-on board providing general-purpose I/O expansion. This board features the MCP23017, a 16-bit resolution I/O expander with an I2C serial interface from Microchip. Any of the sixteen I/Os of the MCP23017 can be configured as an input or output by writing to the configuration register. It also features an interrupt feature,...
OSD Click is a compact add-on board that adds a monochrome on-screen display (OSD) as an overlay layer over a video in an application without any external driver. This board features the MAX7456, a single-channel monochrome on-screen display generator from Analog Devices. In integrated EEPROM, the MAX7456 is preloaded with 256 characters or pictographs,...
IrThermo Click 3.3V is a compact add-on board that allows contactless measurement of the object's temperature. This board features the MLX90614, a single and dual-zone infrared thermometer from Melexis. It encompasses both the thermopile sensor element and the ASSP, a signal conditioning circuitry that features 17-bit ADC and powerful DSP, which allow a...
mikroTFT is a breakout board for MI0283QT-9A 2.8" TFT color display with 320 x 240 pixel resolution, driven by ILI9341 display controller. TFT display is covered with a resistive touch panel which can be used as an input device.
Bluetooth 2 Click features WT41u, a long range class 1, Bluetooth® 2.1 + EDR module from Silicon Labs. WT41u is a highly integrated and sophisticated Bluetooth® module, containing all the necessary elements from Bluetooth® radio and a fully implemented protocol stack. Therefore WT41u provides an ideal solution for developers who want to integrate...
PIC18F4520-I/P (DIP40/20MHz) microcontroller
mikroProg for 8051 is a standalone USB programmer for 8-bit Atmel AT89 (8051) microcontrollers. It is supported with mikroC, mikroBasic and mikroPascal compilers for 8051.
BLE P Click is a compact add-on board with a low-energy Bluetooth transceiver designed for operation in the peripheral role. This board features the nRF8001, a Bluetooth 4.0 transceiver from Nordic Semiconductor. The nRF8001 combines Radio, Link Layer, and Host into a single product with built-in stack features such as low-energy PHY layer, link layer...
FTDI Click is a compact add-on board that provides a high-speed USB to a serial interface converter. This board features the FT2232H, a 5th-generation high-speed USB 2.0 to a serial UART/I2C/SPI interface converter from FTDI. The entire USB protocol is handled on the chip (FTDI USB drivers required), making this board ideal for various USB applications....
mikroProg for Tiva is a fast programmer and hardware debugger. mikroProg supports all Stellaris and Tiva C Series ARM Cortex™-M3 and M4 devices.
ECG/EMG cable that is 1m in length and has a 3.5mm phone jack.
The mikroBoard is miniature development tool which includes microcontroller, programer, small proto board and two 2x40 female headers for connection with UNI-DS6 development system.
4x4 RGB click is a matrix of 16 "intelligent" RGB elements, forming a 4x4 display screen. These LED elements feature internal logic, which allows them to communicate directly with the MCU. These intelligent LEDs are meant to be cascaded: the elements communicate by a single line with the host MCU and they feature a signal reshaping section, so the data...
POT Click is a Click board™ with the accurate selectable reference voltage output. By employing a high-quality 10mm carbon potentiometer, this Click board™ can provide very accurate voltage output. POT click is also equipped with the SMD jumper, which allows the maximum reference voltage to be selected between two typically used values: 2.048V or 3.3V....
CAN Board is a development tool for microcontrollers with integrated MCP2551 CAN transceiver used in connection with CAN network.
CANSPI Board is a CAN development tool for microcontrollers with SPI interface. The Board includes MCP2515 CAN controller and MCP2551 transceiver.
Heart Rate 4 Click is a compact add-on board for heart-rate monitoring applications. This board features the MAX30101, an integrated pulse oximetry and heart-rate monitor module from Analog Devices. The module includes internal LEDs, photodetectors, optical elements, and low-noise electronics with ambient-light-rejection circuitry, establishing...
Loading
Load more
Loading