Filter Product By
Slide and select filter/s
Filtered by
VCP Monitor 5 Click is a compact add-on board designed for various applications' precise current, voltage, and temperature measurements. This board features the INA700A, a 16-bit digital power monitor from Texas Instruments based on an advanced EZShunt™ technology for high-accuracy sensing. This board handles full-scale current measurements up to...
H-Bridge 17 Click is a compact add-on board for driving brushed DC motors, solenoids, and actuators. This board features the MP6619L, an H-bridge motor driver IC from MPS, capable of delivering high motor currents while operating from a wide supply voltage range of 2.5V to 28V. This Click board™ features flexible control via mikroBUS™ pins, configurable...
Boost-INV click is a very useful DC/DC voltage converter device, as can output both positive and negative voltage, boosted up to 12.78V and -13.95, from a single fixed voltage input. The input voltage can vary between 2.55V to 5.5V, making the Boost-INV click an ideal solution for powering devices with complex, split-rail power supply demands, using only...
for Kinetis CAPACITIVE Rapid development of multimedia and gui-centric applications BUILD GREAT GUI IN NO TIME Rich with peripherals Mikromedia 3 for Kinetis CAPACITIVE is not limited to multimedia-based applications only. USB, digital motion sensor, battery charging functionality, SD card reader and much more expands its use beyond the...
MCU Card is a standardized add-on board, which allows very simple installation and replacement of the microcontroller unit (MCU) on a development board equipped with the MCU Card socket. By introducing the new MCU Card standard, we have ensured the absolute compatibility between the development board and any of the supported MCUs, regardless of their pin...
Stepper 11 Click is a compact add-on board that contains a bipolar stepper motor driver. This board features the TB9120AFTG, a two-phase bipolar stepping motor driver with a clock input interface and a PWM constant-current control system from Toshiba Semiconductor. It supports from full-step to 1/32 steps for less motor noise and smoother control, while...
LED Stripe 6W is a super bright white LED light strip with a durable and flexible silicone flex hose and DC connector representing an essential element of good lightning. Its DC female connector cable is ideal for quick, easy, and convenient mains connection from your LED strip light setup to your DC power adapter without a need for any soldering or...
With the rise of the popularity of RISC-V, it was not a matter of will we support it. It was just a matter of time. In one of the latest NECTO updates we have added full support for RISC-V architecture. Just like our newest T-shirt says "Everybody plays it safe. We're gonna RISC-V it." It is 100% cotton, in navy blue color, and it comes in various...
Solar Energy 3 Click - 1V8 is a compact add-on board for energy harvesting in low-power applications. This board features the NEH2000BY, an energy-harvesting PMIC from Nexperia. This board also features the AMG-1401C photovoltaic cell, known for its high efficiency of over 20%, even in low and artificial light environments. The NEH2000BY manages energy...
Current 14 Click is a compact add-on board designed for precise current measurement without direct contact. This board features the BM14270, a magnetic current sensor IC from ROHM Semiconductor. It uses a coreless, non-contact magnetic impedance (MI) sensor, ensuring low power loss and accurate current detection. It communicates through a 2-wire I2C...
Tester 2 Click is a diagnostic Click board™ designed for real-time visual monitoring of mikroBUS™ pin logic levels. It features a 2x6 LED array controlled by SI2310 N-channel MOSFETs, providing reliable feedback on pin states and additional LEDs for monitoring the activity of +3.3V and +5V power rails. The board also includes a ClickID switch for using...
MCU Card is a standardized add-on board, which allows very simple installation and replacement of the microcontroller unit (MCU) on a development board equipped with the MCU Card socket. By introducing the new MCU Card standard, we have ensured the absolute compatibility between the development board and any of the supported MCUs, regardless of their pin...
DAC 12 Click is a compact add-on board that contains a highly accurate digital-to-analog converter. This board features the DAC60508, a general-purpose octal 12-bit analog voltage-output DAC from Texas Instruments. It includes a 2.5V, 5ppm/°C internal reference, eliminating the need for an external precision reference in most applications, and supports...
This one is for all CODEGRIP users but also people who love to wear fun colors. It is this beautiful anchor gray color with the large CODEGRIP logo on the front and the Mikroe logo on the left sleeve. We can say that these T-shirts are one of the favorites among our colleagues - you can catch a lot of us wearing them to work. FEMALE SIZES CHART Size...
Temp-Log 7 Click is a compact add-on board used to measure and record the temperature of an environment over time. This board features the TMP1826, a high-accuracy, 1-Wire® compatible digital output temperature sensor from Texas Instruments with integrated 2-kbit EEPROM. It supports a wide operating temperature range from –20°C to +85°C with its high...
GNSS 17 Click is a compact add-on board for precise and reliable global navigation and positioning. This board features the M20071, an integrated full-function GNSS receiver module from Antenova, which features the MediaTek AG3335MN flash chip. This module can concurrently track multiple GNSS constellations, including GPS, GLONASS, GALILEO, BEIDOU, and...
Brushless 30 Click is a compact add-on board for precise and reliable control of brushless motors. This board features the TB9083FTG, a gate-driver IC from Toshiba Semiconductor, known for its robust performance in automotive environments. It also includes additional header pins for 6 PWM inputs , safety relays and current sense amplifiers. Comprehensive...
Environment 5 Click is a compact add-on board designed to measure temperature, humidity, and CO₂ levels with high precision. It is based on two high-performance sensors from Sensirion: the SHT40-BD1B for humidity and temperature, and the STC31-C for carbon dioxide concentration. Featuring a low power design, wide operating ranges, and excellent long-term...
The LV18FJ Experimental board is used for programming LV18FJ MCU Cards. This board makes the programming process easier. You just need to place a card correctly and start programming your microcontroller.
Tamper click is equipped with SDS001, a low profile side-actuated detect switch, made by C&K company. This is a high-quality, low-current detection switch, which is designed in a form of a push button. The switch itself is very small - only 2mm of switch overtravel length, which coupled with its low actuation force, makes it ideal for using it as a...
MCU Card is a standardized add-on board, which allows very simple installation and replacement of the microcontroller unit (MCU) on a development board equipped with the MCU Card socket. By introducing the new MCU Card standard, we have ensured the absolute compatibility between the development board and any of the supported MCUs, regardless of their pin...
Barometer 2 Click is a digital barometer on a Click board™. Barometer 2 is equipped with the LPS35HW, an absolute piezoresistive pressure sensor with ceramic, water resistant package, manufactured using a proprietary technology. This sensor offers many benefits, including low power consumption, high resolution of the pressure data, embedded thermal...
Loading
Load more
Loading
