Filter Product By
Slide and select filter/s
Filtered by
Accel 4 Click is a compact add-on board that contains an acceleration sensor. This board features the FXLS8974CF, a 12-bit three-axis accelerometer from NXP Semiconductors. It allows selectable full-scale acceleration measurements in ranges of ±2g, ±4g, ±8g, or ±16g in three axes with a configurable host interface that supports both SPI and I2C serial...
This multiband LTE Rubber Antenna with adjustable angle is an excellent choice for all 3G/4G LTE-based click boards from our offer, as well as other devices that require excellent throughput on all major cellular bands worldwide. The antenna has an SMA male connector on its end, which allows it to be mounted directly on the Click board™ or the female SMA...
The 5V-3.3VReg Board is an accessory board that includs an on-board regulator. This regulator is used to provide local on-card regulation by reducing voltage from 8-16V AC/DC to 5V or 3.3V DC.
ADC 3 Click is a compact add-on board with a high-performance data converter. This board features the MCP3428, a 16-bit ΔΣ analog-to-digital converter with differential inputs and I2C compatible interface from Microchip. The MCP3428 performs conversions at rates of 15, 60, or 240 samples per second, depending on user-controllable configuration bit...
Compass Click is a compact add-on board representing an electronic compass. This board features the LSM303DLHC, an ultra-compact, high-performance e-compass module featuring a 3D digital linear acceleration sensor and a 3D digital magnetic sensor from STMicroelectronics. It includes a specific sensing element capable of measuring both linear acceleration...
Support for three different architectures: dsPIC33, PIC24 and PIC32 in a single development board. It contains many on-board modules, including multimedia, Ethernet, USB, CAN and other. On-board mikroProg™ programmer and debugger supports 101 microcontrollers via MCU cards. Buy now Note: MCU and click boards are not included in the package. One...
Determine your current position with GNSS 5 click. It carries the NEO-M8N GNSS receiver module from u-blox. GNSS 5 click is designed to run on a 3.3V power supply. The click communicates with the target microcontroller over I2C or UART interface, with additional functionality provided by the following pins on the mikroBUS™ line: RST, INT, PWM.
2.83" TFT color display MI0283QT-9A with 320x240 pixel resolution...
Color Click is a compact add-on board representing an accurate color-sensing solution. This board features the TCS3471, a color light-to-digital converter from ams AG. It can sense red, green, and blue light components and clear light. It has a very high dynamic range of 1,000,000:1, which allows it to be used in various light conditions. It is equipped...
Standard 80-pin TQFP card with PIC18F87K22 MCU. Featuring nanoWatt XLP™ technology, it has 16 MIPS operation, 128K bytes of linear program memory, 3896 bytes of linear data memory, and support for a wide range of power supply from 1.8V to 5V.
Circular NFC R25 Antenna is PCB antenna designed with the intention to be used as extension of development boards and placed remotely on desired place such as plastic casing, existing products, or even under displays. Antenna is designed in circular shape with diameter of 25mm. Its important to mention that this antenna can be used for NFC and RFID...
Standard solderless breadboard. It has 2 power buses, 62 columns and 10 rows - a total of 830 contact points.
1x16 Male Pin Header
Thunder Click is a compact add-on board that detects the presence and proximity of potentially hazardous lightning activity in the vicinity. This board features the AS3935, a programmable fully integrated lightning sensor from ScioSense with a sensitive coil antenna, and the MA5532 from Coilcraft. Besides detecting potentially hazardous lightning...
ETH 3 Click is a compact add-on board that contains Ethernet Controller & PHY for embedded applications. This board features the LAN9250, a fully featured 10/100 Ethernet controller that provides performance, flexibility, ease of integration, and system cost control from Microchip Technology. It complies with the IEEE802.3 (Full/Half-Duplex 10BASE-T...
LCD Mini Click is a compact add-on adapter board that allows you to interface an LMB162XFW LCD display to any microcontroller. This board features the MCP23S17, a 16-bit I/O expander with a serial interface from Microchip. It allows you to display 2x16 monochrome characters on an LMB162XFW LCD display and is ideal for displaying short messages or numbers...
LTE IoT 4 Click is a compact add-on board that contains an IoT module with worldwide coverage. This board features the nRF9160, highly integrated, low-power SiP with LTE-M/NB-IoT and GPS from Nordic Semiconductor. The nRF9160 has an integrated ARM® Cortex®-M33 processor supported by 1MB of Flash and 256KB RAM memory with advanced security features. It can...
Riverdi Click is a compact add-on adapter board that provides an interface for connecting the Riverdi TFT displays to any MCU. This board features the ZIF20 connector and necessary circuits for interfacing Riverdi’s displays based on the FT8xx graphic controller. This Click adapter allows all FT8xx-based Riverdi displays to be interfaced with a...
The UNI-REG Board features a Step-Down Voltage Regulator LM2576 that enables voltage to change from 7-23V AC (or 9-32V DC) to 5V, 4V, 3.3V, 2.7V or 1.8V. The board components are clearly marked, which makes the connection easier.
BlueTooth Stick Board offers low power, highly economic Bluetooth radio for adding wireless capability to your prototype device. NOTE: The BlueTooth Stick board has transitioned to Legacy status. Users seeking a replacement can find a suitable substitute in the RN4678 Click board™. For more information, please visit the RN4678 Click product page.
If you need a battery power supply, we have a great and compact solution. This rechargeable 6000mAh 3.7V battery can deliver even more.
DALI Click is a compact add-on board that provides a Digital Addressable Lighting Interface (DALI) with any MCU. This board features two PS2701-1 small outline couplers capable of 3.75kV isolation from Renesas. DALI interface represents an industry-standardized protocol specified in the multi-part international standard IEC 62386. Equipped with a linear...
RF Meter Click is a compact add-on board that measures radio frequency power. This board features the AD8318, a logarithmic detector/controller from Analog Devices. It covers a frequency span from 1MHz up to 8GHz over a 60dB range, approximately. The AD8318 acquires the signal over an external antenna, which is then processed by the logarithmic detector...
Ribbon Cable 40-wire, Male/Female, 20 cm
Loading
Load more
Loading
