Filter Product By
Slide and select filter/s
Filtered by
Temp&Hum 20 Click is a compact add-on board that represents temperature and humidity sensing solution. This board features the CC2D23, a highly accurate, fully-calibrated relative humidity and temperature sensor from Amphenol. This sensor, characterized by its high accuracy (±2% from 20% to 80%RH (±3% over entire humidity range)) and high resolution,...
Fusion for PIC32 v8 is a development board for PIC32 architecture devices. It contains many on-board modules necessary for device development, including multimedia, Ethernet, USB, and other.
LV-24-33 v6 100-pin TQFP 2 MCU Card Empty PCB
Heart rate 6 Click is an optical biosensor Click board™ designed for heart-rate monitoring (HRM). This Click board™ employs a specialized sensor that incorporates two LED drivers and photo-sensing elements which are the most sensitive to green light. The green light is most commonly used to measure the dilatation of the blood vessels, therefore Heart rate...
TFT Color Display with Touch Screen (7") and frame is a color active matrix thin film transistor(TFT) liquid crystal display (LCD).
GNSS 6 Click is a compact add-on board that provides fast positioning capabilities. This board features the Teseo-LIV3FL, a tiny low-power GNSS module from STMicroelectronics. It is an easy-to-use global navigation satellite system that embeds the Teseo III single-die standalone positioning receiver, which can work simultaneously on multiple...
LTE IoT 12 Click is a compact add-on board designed for low-power LTE Cat M1, NB-IoT, and EGPRS communication in IoT applications. This board features the BG95-M3 multi-mode data-only from Quectel, which also integrates GNSS (GPS, GLONASS, BDS, Galileo, QZSS) for precise location tracking. The board supports a wide range of LTE and 2G bands, offers...
Tact Switch 6x6mm SMD Omron (10pcs)
MIC23099 click carries the MIC23099, a single AA/AAA cell step-down/step-up regulator with battery monitoring. The click is designed to run on a 3.3V power supply. It communicates with the target microcontroller over the following pins on the mikroBUS™ line: CS, INT.
Brushless 5 click is a 3 phase sensorless BLDC motor controller, with a soft-switching feature for reduced motor noise and EMI, and precise BEMF motor sensing, which eliminates the need for Hall-sensors in motor applications. It can drive 5V-16V motors with up to 500 mA current. The motor driver allows speed control via the PWM signal from the host MCU....
Light Ranger 3 click is an accurate distance measurement Click board™ based on a ToF (Time of Flight) measurement principle. The Simblee™ enabled RFD77402 rangefinder module from RF Digital is a complete measurement stack on the chip. It is surprisingly easy to work with, as this highly integrated range finder module exposes the only I2C interface and INT...
4G LTE&GNSS Click is a compact add-on board designed for advanced global tracking and telematics applications, enabling developers to build highly efficient and smaller solutions without compromising performance. This board features the LENA-R8, a multi-mode LTE Cat 1bis module from Trasna. It stands out for its compact size and extensive network...
Charger 9 click is a Li-Ion (Li+, Li-Po) battery charger, capable of charging one, two or three battery cells. It is based on the MAX1757, an integrated Li+ battery charger with many features that allow safe and reliable charging. This IC has an internal switching-mode regulation with input current limiting, allowing it to use an external power supply...
pH Click Bundle - This bundle gives you everything you need to take high accuracy, interference-free pH readings. It allows users to combine pH Plastic Probe BNC with pH Click to read pH values with the same accuracy and capabilities as with some other solutions from AtlasScientific.
Click shield for Pi 400 Combine Raspberry Pi 400 with your favorite Click boards™ Start your project development with our Click Shield for Pi 400 fast and easy. The Raspberry Pi 400 combined with the mikroBUS™ and Shuttle socket provides you immediate access to hundreds of Click boards™ in our offer, allowing you to create a limitless number of...
Angle 7 Click is a compact add-on board that detects the absolute angular position of a permanent magnet. This board features the AS5600, a programmable Hall-based rotary magnetic position sensor with a high-resolution 12-bit analog or PWM output from ams AG. Based on planar Hall technology, this sensor measures the orthogonal component of the flux...
UWB 2 Click is a compact add-on board that brings Ultra-Wideband communication to any solution. This board features the DWM3000, an IEEE 802.15-z UWB transceiver module from Qorvo. This module fully aligns with FiRaTM PHY, MAC, and certification development. It uses an integrated UWB antenna to establish wireless communication in UWB channels 5 (6.5GHz)...
GNSS RTK 3 Click is a compact add-on board that enhances the precision of position data derived from satellite-based positioning systems. This board features the LC29HDA, a dual-band, multi-castellation GNSS module from Quectel. This module supports the concurrent reception of all five global GNSS constellations: GPS, BDS, Galileo, GZSS, and GLONASS. It...
Standard empty MCU card for 100-pin TQFP Stellaris® 1000 series. Card is not populated with components. Pin distance 100mil.
Buggy is a robot rover platform expandable with all sorts of sensors and transceivers. A dream car for hackers and makers. Multiple kits available.
Nano Power 2 click is a very low power voltage comparator, aimed at portable and battery-powered applications. It allows detecting a difference of two voltage potentials, applied on two input pins. The device can detect differences very precisely, avoiding oscillations that can occur when both input voltages are equal by employing an internal hysteresis....
LDC1101 click is an inductance-to-digital converter Click Board™. It is designed for a range of different applications, based on the inductivity measurements. You can use it to detect the position, rotation, or motion of an object. LDC1101 carries the LDC1101, the integrated, high-resolution, high-speed, inductance-to-digital converter. The converter...
Clock Gen 5 Click is a compact add-on board that contains a digital programmable oscillator solution. This board features the LTC6903, a low-power self-contained digital frequency source providing a precision frequency from 1kHz to 68MHz set through a 3-wire SPI digital interface from Analog Devices. The LTC6903 features a proprietary feedback loop that...
H-Bridge 8 Click is a compact add-on board that contains H-bridge current regulator. This board features the MP6519, a monolithic, step-down, current-source driver for applications that require accurate and fast current-response control from Monolithic Power Systems (MPS). It achieves excellent load and line regulation over a wide input supply range up to...
Loading
Load more
Loading
