Filter Product By
Slide and select filter/s
Filtered by
Type-J thermocouple with glass braid insulation is used for precise measurement of high temperatures. Thermocouple itself can measure up to 480°C (900°F). It is 2 meters long and ends with a PCC-SMP connector which is compatible with Thermo J click.
EnOcean 4 Click carries a ultra-low power TCM515U transceiver gateway module which operates at 902MHz radio band, perfectly suited for the realization of transceiver gateways, actuators and controllers for systems communicating based on the EnOcean radio standard. For communication to other devices we have implemented PCB antenna on the board making this...
Flash 8 Click is a compact add-on board representing a highly reliable memory solution. This board features the GD5F2GQ5UEYIGR, a 2Gb high-density non-volatile memory storage solution for embedded systems from GigaDevice Semiconductor. It is based on an industry-standard NAND Flash memory core, representing an attractive alternative to SPI-NOR and...
EasyPIC PRO v7 is a full-featured development board for high pin-count 8-bit PIC® microcontrollers. It features USB Type-C CODEGRIP programmer/debugger. It contains many on-board modules necessary for development variety of applications, including graphics, Ethernet, USB, data logging and other.
Temp&Hum 2 click is a smart temperature and humidity sensor click board™, packed with features, that allow easy and simple integration into any design that requires accurate and reliable humidity and temperature measurements. It measures a wide range of temperature and relative humidity values with a great accuracy. The Si7034 sensor IC from Silicon...
ISM TX Click is a compact add-on board that contains an ASK and (G)FSK transmitter with a programmable SPI interface. This board features the MAX41460, a UHF sub-GHz ISM/SRD transmitter designed to transmit On-Off Keying (OOK), Amplitude- Shift Keying (ASK), Frequency-Shift Keying (FSK), and Gaussian (G)FSK (or 2GFSK) data from Analog Devices. The fast...
Compass 7 Click is a compact add-on board perfect for applications like an electronic compass. This board features the MMC5633NJL, a monolithic complete 3-axis AMR magnetic sensor with on-chip signal processing and an integrated digital bus from MEMSIC. It can measure magnetic fields within the full-scale range of ±30 Gauss (G) with up to 0.0625mG per LSB...
BarGraph 3 click is equipped with a five-segment LED bar graph display, notable for its strong and uniform illumination of the segments. Each segment consists of three internal LEDs with a common cathode, while the anodes of all LEDs are connected in a single point. This reduces the number of the display bar pins to just six. The common anode is connected...
ADC 16 Click is a compact add-on board that contains a high-performance data converter. This board features the ADS7142-Q1, a low-power two-channel 12-bit analog-to-digital converter from Texas Instruments. This I2C configurable 140kSPS successive approximation register (SAR) analog-to-digital converter (ADC) can autonomously monitor signals while...
Thermo 18 Click is a compact add-on board that provides an accurate temperature measurement. This board features the WSEN-TIDS, a silicon-based, high-precision digital temperature sensor with embedded analog and digital signal processing unit from Würth Elektronik. This temperature sensor, characterized by its high accuracy (up to ±0.25 °C typical) and...
Charger 18 Click is a compact add-on board representing a single-cell battery charger. This board features the LTC3553, a micropower, highly integrated power management, and battery charger for single-cell Li-Ion/Polymer battery applications from Analog Devices. Designed specifically for USB applications, it also includes a PowerPath manager with...
Slide Switch TS-13CQN (SS-12D10G5) is a rectangular mechanical switch from ELECSOUND that slides vertically from the open (OFF) position to the closed (ON) position, allowing control of a circuit’s current flow without having to splice a wire manually. It can withstand current and voltage ratings up to 1.5A and 125VAC, ensuring endurance and reliability...
BATT-MON 2 Click is a compact add-on board representing a battery monitoring solution. This board features the MAX17262 from Analog Device, an ultra-low power I2C-configurable fuel-gauge IC with implemented ModelGauge™ m5 algorithm. The MAX17262 monitors a single-cell battery pack (best performance for batteries with 100mAhr to 6Ahr capacity), providing...
Ribbon Cable 16-wire, Female/Female, 20 cm
The GLCD 240x64 Adapter Board is used to connect a 240x64 GLCD T6963C from Toshiba to your development board or prototype device. This high-quality board has an on-board potentiometer used for graphic LCD contrast adjustment.
GNSS Active FPC Antenna (W3908B0100) is a reliable and durable flat patch antenna for GNSS receivers, tracking, and location-based services. With a compact size of 20x26.8mm, frequency range of 1.56-1.61GHz, 0.3dBi gain, and omni radiation pattern, this antenna is optimized for efficiency. It has a 50Ω nominal impedance and a 3W power rating, and comes...
4D - display click is an adapter Click board™ that offers a mikroBUS™ interface for controlling 4D Systems gen4 Series intelligent Display Modules. 4D Systems designs and manufactures a wide range of Intelligent Display Modules equipped with powerful graphics processors. Their displays allow graphical objects control by exchanging specifically formatted...
NFC 6 Click is a compact add-on board that contains an NFC transceiver for contactless communication. This board features the ST25R95, a near-field communication transceiver from STMicroelectronics. It supports reader and writer operating modes and emulates ISO/IEC 14443-3 Type A cards. The RF communications are done over the 13.56MHz. The transceiver...
SPI Isolator 2 Click is a compact add-on board that contains a digital isolator optimized for a serial peripheral interface. This board features the ISO7741, a high-performance quad-channel digital isolator with a double capacitive silicon dioxide insulation barrier capable of galvanic isolation up to 5000Vrms from Texas Instruments. The ISO7741 provides...
NFC 7 Click - I2C is an add-on board that integrates NFC functionality in various applications. This board features the PN7160 (PN7160A1HN/C100), a Near Field Communication (NFC) controller from NXP that is compliant with NFC Forum and NCI 2.0 standards. The board features an I2C communication interface, low-power consumption modes, and a new-generation...
mikroPascal PRO for PIC32 Buy now Download
ECG/GSR Click is a compact add-on board representing a complete solution for the development of ECG and GSR applications. This board features the AS7030B, a vital sign sensor based on Photoplethysmography (PPG) and Electrocardiogram (ECG) operations from AMS-AG. This vital-sign sensor features a low noise analog front end, a single device integrated...
Loading
Load more
Loading
