Filter Product By
Slide and select filter/s
Filtered by
NO2 2 Click is a gas sensor Click board™, equipped with the MiCS-2714, a compact metal oxide (MOS) sensor. This sensor reacts to the presence of nitrogen dioxide (NO2) and hydrogen (H2). Its impedance changes as a result of a catalytic reaction, allowing it to be used in a voltage divider configuration. This voltage can be sampled by an accurate A/D...
MCU Card is a standardized add-on board, which allows very simple installation and replacement of the microcontroller unit (MCU) on a development board equipped with the MCU Card socket. By introducing the new MCU Card standard, we have ensured the absolute compatibility between the development board and any of the supported MCUs, regardless of their pin...
Development kit for RGB LED matrix that includes: Matrix RGB click, 32x32 RGB LED Matrix Panel - 6mm pitch, 5V-3A power supply with EU plug (can power up up to two panels), accessories.
This WiFi Rubber Antenna is an excellent choice for any Click board™ that features a WiFi module. The antenna has an right angle SMA male connector on its end, which allows it to be mounted directly on the Click board™ or the female SMA module connector.
Buggy is a robot rover platform expandable with all sorts of sensors and transceivers. A dream car for hackers and makers. Multiple kits available.
DC Motor 8 click is a DC motor driver. It can drive simple DC motors with brushes, providing them with a significant amount of current and voltage up to 40V. The click has one control input, that uses the PWM signal from the host MCU. It uses the half-bridge topology to regulate the speed of the motor rotation, employs advanced dead-time circuitry that...
Vibro Motor click features a compact size Eccentric Rotating Mass (ERM) motor, labeled as C1026B002F. This type of motor is often used for haptic feedback on many small handheld devices, such as the cellphones, pagers, RFID scanners and similar devices. This motor contains a small eccentric weight on its rotor, so while rotating it also produces vibration...
LCD Mono Click is a Click board™ that uses the LS013B7DH03 LCD display from Sharp which combined with the EFM32, from Silicon Labs, and its energy saving capabilities creates a powerful display application. The application is capable of driving a 128x128 pixel display drawing as little as 2 µA while showing a static image. Even when updating the frame...
Vibra Sense 2 Click is a compact add-on board that contains a piezo sensor suitable for vibration measurements. This board features the LDT0-028K, a flexible 28 μm thick piezoelectric PVDF polymer film with screen-printed silver ink electrodes, laminated to a 0.125 mm polyester substrate, and fitted with two crimped contacts from TE Connectivity. The...
UNI HALL Click is a compact add-on board representing a simple solution for adding a unipolar Hall switch to your design. This board features the US5881, a unipolar Hall-effect switch designed in mixed signal CMOS technology from Melexis Technologies. It is sensitive only to the North pole magnetic field, outputting a LOW logic level when exposed....
Cap Touch 2 click is a capacitive touch sensing Click board™ which features the CAP1166, an advanced touch/proximity sensor IC, packed with a range of different touch/proximity functionalities, allowing development of robust and aesthetically pleasing touch interfaces. Besides six touch sensitive channels, the sensor IC has six independent LED drivers,...
Silabs Click Shield An ideal platform for developing energy-friendly connected IoT solutions Start your IoT solution development with our Silabs Click Shield fast and easy. The Thunderboard™ and Starter Kit platforms, in combination with the mikroBUS™ socket, provides you immediate access to hundreds of Click boards™ in our offer, allowing you to...
PSoC® TFT Expansion Board is a breakout board for a 2.8”, 320x240 px MI0283QT-9A TFT display. It's equipped with a microSD slot, and compatible with the CY8CKIT-050 PSoC® 5LP development kit.
EasyPIC PRO v7 is a full-featured development board for high pin-count 8-bit PIC® microcontrollers. It features USB Type-C CODEGRIP programmer/debugger. It contains many on-board modules necessary for development variety of applications, including graphics, Ethernet, USB, data logging and other. MIKROE-4459
Rectangular NFC 40x30 Antenna is PCB antenna designed with the intention to be used as extension of development boards and placed remotely on desired place such as plastic casing, existing products, or even under displays. Antenna is designed in circular shape with diameter of 40mm. Its important to mention that this antenna can be used for NFC and RFID...
Try the WunderBar and watch how yesterday's limits of App development for iOS and Android devices start melting away like a piece of chocolate on your tongue, releasing an abundance of new possibilities that will amaze and excite you. Kit contains WunderBar board, Casing, USB cable, Li-Ion battery, Li-Ion coin cell batteries, Tacky tapes, User manual
DRAM Click is a compact add-on board representing a dynamic random-access memory solution. This board contains the APS6404L-3SKR from AP Memory, a high-performance 64Mb SPI/KPI PSRAM memory organized as 8M x 8 bits each. This Pseudo-SRAM device features a high speed, low pin count interface and incorporates a seamless self-managed refresh mechanism to...
70 blue LEDs for displaying symbols and characters 7x10 B click is a LED dot matrix display click, which can be used to display graphics or letters in a very simple and easy way. The click board has two LED dot matrix modules with 7x5 stylish, round, dot-like LED elements. These displays produce clean and uniform patterns since the elements are...
MikroBoard for ARM 144-pin is primarily intended to be connected to the EasyARM v6 development system but can also be used as a stand-alone device.
Clicker 2 for CEC1702 The possibilities are endless A compact development board with two mikroBUS™ sockets and your favorite microcontroller. Unleash your imagination.
RadioStation click is a unique click board™ that can be used to broadcast the music via the FM radio band. It features the Si4713-B30 from Silicon Labs, the best in class integrated FM broadcast stereo transmitter, which operates in the frequency range of 76MHz to 108MHz. It can also broadcast RDS/RDBS data. The click board™ can be equipped with a small...
The Default MCU card that comes with the EasyMx PRO™ v7 package. It contains TM4C129XNCZAD microcontroller which is loaded with on-chip modules and is a great choice for both beginners and professionals. After testing and building the final program, this card can also be taken out of the board socket and used in your final device.
6DOF IMU 8 Click is an advanced 6-axis motion tracking Click board™, which utilizes the ISM330DLC, a high-performance System in Package (SiP), equipped with a 3-axis gyroscope, and a 3-axis accelerometer. A combination of the two most commonly used motion sensors allows for full 6D sensing. Tailored towards the industry application, the ISM330DLC is...
Color 9 Click is a very accurate color sensing Click board™ which features the APDS-9250, IR and ambient light sensor, from Broadcom. It contains a specially designed matrix of photosensitive elements, which can sense red, green, blue and IR component. Four low noise 18bit ADCs ensure the high dynamic range, making this sensor suitable to be used behind...
Loading
Load more
Loading
