A high-quality cost-effective 5" TFT display with a projected capacitive touch screen and decorative cover glass (black bezel). Well integrated with MikroElektronika tools. Also available with white bezel.
The SmartADAPT2 with GLCD/LCD Connector Board is used to rearrange 16 I/O pins just by moving on-board jumpers in order to meet your specified needs. It features a jumper for selecting input voltage and configurable GLCD/LCD connector.
Tap inside the car diagnostic systems OBD II to DB9 cable enables you to connect with your car’s OBD-II system. You just need to plug OBD II connector on one end to your car and the other end it into some sort of hardware interface which has a DB9 connector, like our OBD II click. The overall length of the cable is five feet (152cm).
The SHT1X Board features the SHT11 sensor. It is connected to a development board through a 2-wire serial interface, thus enabling you to measure temperature and humidity. Note: not recommended for new design.
This WiFi Rubber Antenna with adjustable angle is an excellent choice for any Click board™ that features a WiFi module. It can be also used with all other devices that require excellent WiFi throughput including routers, access points, etc. The antenna has an SMA male connector on its end, which allows it to be mounted directly on the Click board™ or the...
Relay 5 Click is a compact add-on board with general-purpose I2C-controlled relays that any host MCU can control. This board features three J1031C3VDC.15S, a high-current single-pole double-throw (SPDT) signal relays controlled by the PCA9538A, a low-voltage 8-bit I/O port expander from NXP Semiconductors. Highly sensitive, the J1031C3VDC.15S offers a low...
The Easy24-33 v6 development system supports 14-, 18-, 20- and 28-pin PIC24 and dsPIC33 microcontrollers from Microchip. It comes with a PIC24F16KA102. The system features a USB 2.0 programmer with mikroICD and many peripheral modules such as Touch Sense, Serial RAM, EEPROM, etc.
This is a USB 3.1 cable with USB Type C male connectors on both sides. Cable comes with USB Type C Female to USB Type A Male adapter, making it compabitle with USB 2.0 and USB 3.0 host slots as well. Cable is 1.5 meters long and compatible with the new 8th generation of Mikroe development tools.
Oximeter 3 Click is a compact add-on board perfectly suited for measuring the blood oxygen saturation. This board features the VCNL4020C-GS08, a fully integrated high-resolution digital biosensor from Vishay Semiconductors. It combines an infrared emitter and PIN photodiode for biosensor functionality, ambient light sensor, and signal processing IC in a...
GNSS 12 Click is a compact add-on board that provides positioning, navigation, and timing services. This board features the CAM-M8C, a professional-grade GNSS module built on the high-performing M8 GNSS engine from u-blox. This module utilizes concurrent reception of up to three GNSS systems (GPS/Galileo together with either BeiDou or GLONASS), offering...
StartUSB for AVR Board is a small development board featuring Atmel AT90USB162 device with fast USB 2.0 support. It features connection pads for all MCU pins, as well as two prototyping areas for placing additional components.
EasyMx PRO v7 for Stellaris® ARM® is a development board for Stellaris® ARM® Cortex™-M3 and Cortex™-M4 devices. It contains many on-board modules necessary for device development, including multimedia, Ethernet, USB, CAN and other.
Twisted Wire (2 meters long)
Comparator Click is a compact add-on board that contains two independent precision voltage comparators. This board features the LM2903, a dual differential comparator from onsemi. It provides two pair of screw terminals that allows you to connect separate inputs with additional ground connections, which let you use either a single (range of 2 to 36VDC) or...
NFC Extend Click is NFC tag interface device with possibility of using any shape and size external antenna, offering 16 Kbit of electrically erasable programmable memory (EEPROM). This Click Board™ offer two communication interfaces. The first one is an I2C serial link and can be operated from a DC power supply. The second one is a RF link activated when...
Clicker 2 for Kinetis All the inventions waiting to happen... Clicker 2 is a battery-powered click™ board two-seater. Inventing and putting together fully-functional standalone gadgets is now just 1% perspiration, and 99% inspiration!
Standard empty 80-pin MCU card for EasyPIC PRO™ v7. Card is not populated with components. Pin distance 100mil.
PAC1934 click carries the PAC1934 four channel DC power/energy monitor from Microchip. The click is designed to run on either 3.3V or 5V power supply. It communicates with the target microcontroller over an I2C interface.
Analog MUX Click is a Click board™ that switches one of the sixteen inputs to one output. It employs the CD74HC4067, a High-Speed CMOS Logic 16-Channel Analog Multiplexer/Demultiplexer, produced by Texas Instruments. It offers rail-to-rail operation, allowing the input signal to swing up (and down) to the voltage of the power supply, with no distortion....
Color 6 click is a very accurate color sensing Click board™ which features the AS73211, an XYZ true color sensor from ams. This company has developed a proprietary JENCOLOR™ filter technology, which ensures compliance to the CIE 1931/DIN 5033 standard (human eye response), providing an accurate XYZ color space response. The low noise 24bit ADCs ensure the...
mikroC PRO for FT90x Buy now Download
9DOF 3 Click introduces the BMX055, a small-scale absolute orientation sensor in the class of low-noise 9-axis measurement units, from Bosch Sensortec. It comprises the full functionality of a triaxial, low-g acceleration sensor, a triaxial angular rate sensor and a triaxial geomagnetic sensor. All three sensor components of the BMX055 can be operated and...
3D Hall 3 click is a very accurate, magnetic field sensing Click board™, used to measure the intensity of the magnetic field across three perpendicular axes. It is equipped with the LIS2MDL, a low power 3D magnetic sensor. This IC has a separate Hall sensing element on each axis, which allows a very accurate and reliable measurement of the magnetic field...
Unique ID Click is a compact add-on board that provides a unique registration number to your design. This board features the DS2401, a low-cost electronic registration number from Analog Devices. The DS2401, an improved silicon serial number, provides a unique identity determined by a minimal electronic interface, in this case, using a One-Wire interface....
Loading
Load more
Loading