Filter Product By
Slide and select filter/s
Filtered by
This WiFi Rubber Antenna with adjustable angle is an excellent choice for any Click board™ that features a WiFi module. It can be also used with all other devices that require excellent WiFi throughput including routers, access points, etc. The antenna has an SMA male connector on its end, which allows it to be mounted directly on the Click board™ or the...
The SHT1X Board features the SHT11 sensor. It is connected to a development board through a 2-wire serial interface, thus enabling you to measure temperature and humidity. Note: not recommended for new design.
The Easy24-33 v6 development system supports 14-, 18-, 20- and 28-pin PIC24 and dsPIC33 microcontrollers from Microchip. It comes with a PIC24F16KA102. The system features a USB 2.0 programmer with mikroICD and many peripheral modules such as Touch Sense, Serial RAM, EEPROM, etc.
6DOF IMU Click is a compact add-on board with a 6-axis motion tracking device combining a 3-axis gyroscope and a 3-axis accelerometer. This board features the LSM6DS33, a system-in-package featuring a 3D digital accelerometer and a 3D digital gyroscope from STMicroelectronics, performing in high-performance mode and enabling always-on low-power features...
GNSS 12 Click is a compact add-on board that provides positioning, navigation, and timing services. This board features the CAM-M8C, a professional-grade GNSS module built on the high-performing M8 GNSS engine from u-blox. This module utilizes concurrent reception of up to three GNSS systems (GPS/Galileo together with either BeiDou or GLONASS), offering...
StartUSB for AVR Board is a small development board featuring Atmel AT90USB162 device with fast USB 2.0 support. It features connection pads for all MCU pins, as well as two prototyping areas for placing additional components.
EasyMx PRO v7 for Stellaris® ARM® is a development board for Stellaris® ARM® Cortex™-M3 and Cortex™-M4 devices. It contains many on-board modules necessary for device development, including multimedia, Ethernet, USB, CAN and other.
Tap inside the car diagnostic systems OBD II to DB9 cable enables you to connect with your car’s OBD-II system. You just need to plug OBD II connector on one end to your car and the other end it into some sort of hardware interface which has a DB9 connector, like our OBD II click. The overall length of the cable is five feet (152cm).
Comparator Click is a compact add-on board that contains two independent precision voltage comparators. This board features the LM2903, a dual differential comparator from onsemi. It provides two pair of screw terminals that allows you to connect separate inputs with additional ground connections, which let you use either a single (range of 2 to 36VDC) or...
Oximeter 3 Click is a compact add-on board perfectly suited for measuring the blood oxygen saturation. This board features the VCNL4020C-GS08, a fully integrated high-resolution digital biosensor from Vishay Semiconductors. It combines an infrared emitter and PIN photodiode for biosensor functionality, ambient light sensor, and signal processing IC in a...
Clicker 2 for Kinetis All the inventions waiting to happen... Clicker 2 is a battery-powered click™ board two-seater. Inventing and putting together fully-functional standalone gadgets is now just 1% perspiration, and 99% inspiration!
Standard empty 80-pin MCU card for EasyPIC PRO™ v7. Card is not populated with components. Pin distance 100mil.
PAC1934 click carries the PAC1934 four channel DC power/energy monitor from Microchip. The click is designed to run on either 3.3V or 5V power supply. It communicates with the target microcontroller over an I2C interface.
Analog MUX Click is a Click board™ that switches one of the sixteen inputs to one output. It employs the CD74HC4067, a High-Speed CMOS Logic 16-Channel Analog Multiplexer/Demultiplexer, produced by Texas Instruments. It offers rail-to-rail operation, allowing the input signal to swing up (and down) to the voltage of the power supply, with no distortion....
Color 6 click is a very accurate color sensing Click board™ which features the AS73211, an XYZ true color sensor from ams. This company has developed a proprietary JENCOLOR™ filter technology, which ensures compliance to the CIE 1931/DIN 5033 standard (human eye response), providing an accurate XYZ color space response. The low noise 24bit ADCs ensure the...
9DOF 3 Click introduces the BMX055, a small-scale absolute orientation sensor in the class of low-noise 9-axis measurement units, from Bosch Sensortec. It comprises the full functionality of a triaxial, low-g acceleration sensor, a triaxial angular rate sensor and a triaxial geomagnetic sensor. All three sensor components of the BMX055 can be operated and...
mikroC PRO for FT90x Buy now Download
REED Click is a compact add-on board that adds an electromagnetic switch to your application to control the flow of electricity in a circuit. This board features CT10-1540-G1, a Coto Classic C10 series molded reed switch from Coto Technology. This sensor uses a presence of a magnetic field to make contact with internal poles, thus enabling the flow of...
The SerialRAM PROTO Board enables you to add a Serial RAM device to your prototype device. A 23K640 Serial RAM device is available on-board and communicates with microcontrollers via a Serial Peripheral Interface (SPI).
DAC 3 Click is a compact add-on board with a fully-featured, highly accurate digital-to-analog converter. This board features the MCP4726, a 12-bit voltage output digital-to-analog converter from Microchip. The MCP4726 has a rail-to-rail output, low power consumption, and EEPROM as non-volatile memory for storing DAC register and configuration bit values....
An XYZ Chromatic White Color Sensor Spectral click is a multispectral light sensing device, which uses the state-of-the-art sensor IC for a very accurate chromatic white color sensing. Spectral click provides a direct reading of the XYZ color coordinates, consistent with the CIE 1931 2° Standard Observer color coordinates. It provides mapping of the XYZ...
The SmartG100 Board is a uBlox Leon-G100 GSM/GPRS module development board. The switching power supply is available on-board, so that there is no need for additional components. An antenna is delivered with the board for a better signal quality.
LDC1000 Click is a compact add-on board that measures the inductance change a conductive target causes when it moves into the inductor's AC magnetic field. This board features the LDC1000, a low-power inductance-to-digital converter (LDC) for inductive sensing solutions from Texas Instruments. This SPI-configurable sensor requires only the frequency...
4G LTE-AT&T click is an LTE Cat 1 / UMTS multimodecellular network solution, featuring the compact LARA-R2 series modem from u-blox. This module supports up to four LTE bands and up to two UMTS bands. It also features a full range of options for the high speed cellular networking and communication, such as the network indication, full embedded TCP/UDP...
Loading
Load more
Loading
