Filter Product By
Slide and select filter/s
Filtered by
PIC Clicker PIC clicker is an amazingly compact starter development kit which brings innovative mikroBUS™ host socket to your favorite microcontroller. Board features all you need to get started: PIC18F47J53 microcontroller, USB connector, two LEDs and push buttons, reset button, mikroProg connector and headers for interfacing with external...
WiFi 7 Click is a compact add-on board with a wireless combo module. This board features the ATWINC1510-MR210PB, an IEEE 802.11 b/g/n IoT Module from Microchip. The module uses an onboard printed PCB antenna to communicate with other WiFi devices over the 2.4GHz ISM band. It integrates the network IP stack to minimize host MCU requirements. This includes...
mikroProg for STM32 is a fast USB 2.0 programmer and hardware debugger based on ST-LINK v2. Smart engineering allows mikroProg to support all STM32 ARM Cortex™-M devices in a single programmer.
RS485 Click 3.3V is a compact add-on board that can be used as an interface between the TTL level UART and the RS422/485 communication bus. This board features the SN75HVD12, an RS-485 transceiver from Texas Instruments. It has a half-duplex communication capability at three speeds (32, 10, and 1Mbps): bus Idle, open, short-circuit detection, thermal...
1x8 Female Header Socket (5pcs)
Smart programmable touch 2.8'' display, packed with features. Mikromedia can be used for controlling a wide range of applications: from simple hobby projects, up to entire machine installations. It is powered by STM32F407VGT6 microcontroller unit, it gives you true power to build GUI-centric embedded applications.
RS485 Click 5V is a compact add-on board that can be used as an interface between the TTL level UART and the RS422/485 communication bus. This board features the ADM485, a low-power EIA RS-485 transceiver from Analog Devices. It features a half-duplex communication capability, bus Idle, open and short-circuit detection, thermal shutdown, and more. It is...
TouchScreen Connector
The Relay4 Board is small-sized board with 4 Relays (each supports currents up to 16A). Also, it contains ULN2803 (high-current Darlington arrays) for relays driving and IDC10 connector for easier connecting with development or prototype board.
The DS1820 digital thermometer sensor provides 9-bit Celsius temperature measurements.
The LCD Adapter Board is an effective and low-cost board used to connect your development board or prototype device to an LCD. There is an IDC10 connector as well as a potentiometer for LCD contrast adjustment provided on the board.
The RFid Reader Board offers an effective and low-cost solution for connecting your prototype device to an RFid reader. The RFid reader can be used in a variety of applications. Use this board to create RFid supported devices in a jiffy.
EasyTFT board is a perfect choice for users of MIKROE boards who want to upgrade their GLCD with TFT display. It features connector compatible with GLCD 128x64 connectors, as well as touch panel connectors.
The LM35 is precision integrated-circuit temperature sensors.
mikroC PRO for PIC Buy now Download
StartUSB for PIC Board is a small development board featuring Microchip® PIC18F2550 device with fast USB 2.0 support. It features connection pads for all MCU pins, as well as two prototyping areas for placing additional devices.
LTE IoT 2 Click is a compact add-on board that allows connection to the LTE networks. This board features the BG96, a LTE module from Quectel. It offers two LTE technologies for M2M communication and the Internet of Things (IoT). This module is an embedded IoT communication solution that supports the LTE Cat M1 and NB1 technologies, offering an...
RTC 2 Click is a compact add-on board that keeps track of time in various applications. This board features the DS1307, a 64x8 serial I2C Real-Time clock from Analog Devices. The RTC 6 Click tracks hours, minutes, seconds, days, months, years, and weekdays, with leap year compensation until 2100. The clock frequency is derived from an onboard 32.768KHz...
The EasyConnect Board features standard screw-terminated connectors that enable eight wires to be easily connected or removed. These connectors can handle solid and stranded wires.
The ETHERNET MCU card. It contains PIC32MX795F512L microcontroller with on-chip peripherals and is a great choice for both beginners and professionals. After testing and building the final program, this card can also be taken out of the board socket and used in your final device.
The Audio Codec Board - PROTO includes a low-power stereo CODEC WM8731 with an integrated headphone driver. The board also features headphone and microphone connectors for testing your audio prototype device.
CAN SPI Click 3.3V is a compact add-on board that provides a complete CAN solution and can be used as a control node in a CAN network. This board features the MCP2515, a stand-alone CAN controller with an SPI interface from Microchip. This Click board™ also uses the SN65HVD230, a CAN Bus transceiver from Texas Instruments, as an interface between an...
BLE2 Click is a compact add-on board that provides BT/BLE connectivity for any embedded application. This board features the RN4020, a Bluetooth Low Energy module from Microchip. The module is a highly integrated solution that comes with an RF, a baseband controller, and a command API processor in one package. It is a fully certified Bluetooth 4.0 module...
Connector Header 2-pin (2.54mm pitch) for Li-Poly Battery
Loading
Load more
Loading
