Filter Product By
Slide and select filter/s
Filtered by
100-pin LV24-33 MCU Cards provide easy connection to the development system through four 2x10 male connectors. The bottom layer of these cards is provided with a ground plane for noise prevention.
Smart programmable touch display, packed with features. Mikromedia can be used as a powerful programmable dashboard control panel for both hobby projects, but also for the entire systems. Based on the powerful STM32F407ZG ARM Cortex-M4 MCU family, it represents a powerful tool for building GUI-centric HID applications.
Instead of keeping your wire jumpers jumbled up like a bowl of spaghetti, consider this pack of 140 wire jumpers in a nifty box for easy storage.
The TouchPanel Controller PROTO Board enables you to connect your prototype device to a Touch Panel. There is also a Touch Panel controller with a connector provided on the board.
Hexiwear Battery Pack will keep your favorite IoT development kit charged. You can add any functionality with the onboard mikroBUS™ socket. With Click boards TM add sensors, transceivers, speech recognition modules and more. No more cables and worrying if the battery on it will last the day. If you are interested in stationary version with three mikroBUS...
UVC Click is an ultraviolet sensing board which complements UVC Light Click for a ultimate ultraviolet solution. The board is based on GUVC-T21GH ultraviolet sensor from GenUV, capable of measuring UVC spectrum in the range of 220nm up to 280nm and light intensity from 0mW/cm² up to 9.3mW/cm². With high sensitivity and good solar blindness, it can be a...
The RS485 5 Click is a Click board™ equipped with the MAX485, low-power, slew-rate-limited transceiver for RS-485 and RS-422 communication, from Analog Devices. This device supports half-duplex RS-485 communication and can be used as an interface between the TTL level UART and the RS485 communication bus. Thanks to the low power consumption and reduced...
Hi-brightness RGB LED matrix panel, with 1024 RGB LEDs arranged in a 32x32 grid on the front on a 5mm grid, total size 160x160mm. Comes with one IDC cable and a power cable.
UV Click is a compact add-on board that alerts users of excessive ultraviolet radiation levels. This board features the ML8511A, an ultraviolet light sensor suitable for acquiring UV intensity indoors or outdoors from Rohm Semiconductor. The ML8511A is equipped with an internal amplifier converting photocurrent to voltage depending on the UV intensity...
The EasyBee3 Board includes the MRF24J40MA module used to connect your development board to wireless 2.4 GHz IEEE 802.15.4 network easily. The module communicates with microcontrollers via a Serial Peripheral Interface (SPI).
Click BoosterPack 2 is an extension for Texas Instruments LaunchPads™ with the current BoosterPack Pinout Standard. It has two mikroBUS™ host sockets onboard, for simple and easy integration of 1645 Click boards™ with a LaunchPad™.
The R2R DAC Board features an on-board digital-to-analog converter R2R that uses R/2R-network and rail-to-rail operational amplifier MCP6284 (450 uA, 5 MHz). The board is connected to a prototype device via an on-board IDC10 connector.
SpeakUp 2 Click is a compact add-on board providing an offline speech recognition solution. This board features the FT900Q, a microcontroller from FTDI Chip. The SpeakUp 2 Click can be set to recognize up to 100 voice commands and have the FT900Q carry them out instantly. The FT900Q, which has stored voice commands, compares them with those received from...
PIC18F8520 microcontroller. Featuring nanoWatt technology, it has up to 10 MIPS operation, 128K bytes of linear program memory, 3840 bytes of linear data memory, and lot of internal modules.
The SmartGPS is a development tool that will help you understand GPS technologies. Connect GPS (Global Positioning System) to your PC or development board using the LEA-6S module. The intuitive design of SmartGPS guides you through the process of learning GPS.
Accel 3 Click is a compact add-on board that contains an acceleration sensor. This board features the H3LIS331DL, a low-power, high-g 3-axis digital accelerometer from STMicroelectronics. This MEMS motion sensor features ultra-low power operational modes that allow advanced power saving, smart sleep-to-wakeup functions, and shock detection with a 1000g...
USB to I2C Click is an adapter add-on board with a general-purpose USB master to I2C/UART serial interface. This board features the FT260 from FTDI, an interface device controller that provides a bridge between standard USB Human Interface Device (HID) class drivers and an I2C or UART slave devices. The FT260Q is highly-integrated with a USB 2.0-compliant...
The BIG8051 development system supports 100-pin Silabs 8051 microcontrollers. It comes with the c8051f040 microcontroller. The system is delivered with a Silabs USB 2.0 programmer and many peripheral modules such as Serial Ethernet, DAC, ADC etc.
The Digital Potentiometer Board includes a SPI Interfaced single-channel digital potentiometer MCP41010. The board enables you to set potentiometer values from 0 to 10 kΩ. It comes with many simple and ready-to-use examples.
Button R Click is a compact add-on board equipped with a tactile switch, sometimes called a push button, making it the simplest solution for adding a single push button to your design. This board features the 3006.2112, a tactile switch with integrated independent red LED from Marquardt. It provides a user interface tactile feel with visual feedback,...
PHT Click is a compact add-on board that contains a PHT combo sensor. This board features the MS8607, a digital combination sensor providing 3 environmental measurements all-in-one: pressure, humidity, and temperature from TE Connectivity. This sensor is based on leading MEMS technologies, provides factory-calibrated PHT data available over an I2C serial...
Click shield for Pi Pico The ideal solution for combining Raspberry Pi Pico board with Click boards™ Start your project development with our Click Shield for Pi Pico fast and easy. The Raspberry Pi Pico combined with the mikroBUS™ sockets provides you immediate access to hundreds of Click boards™ in our offer, allowing you to create a limitless number...
BLDC Motor with Hall sensor, from the 42BLF motor series, represents the star wiring type Brushless DC Motor with Hall Effect angle of 120°. With a motor length of 47mm and a weight of 0.29kg, this BLDC motor is rated for a voltage value of 24VDC, at a speed of 4000 ± 10% RPM. It performs its Normal mode of operation at a temperature range of -20 to +50...
The RTC2 PROTO Board allows you to connect a prototype device to a Real-Time Clock (RTC) using DS1307. As soon as you establish connection you are ready to keep track of real time. There is also an on-board battery for power supply backup.
Loading
Load more
Loading
