Filter Product By
Slide and select filter/s
Filtered by
EasyPIC PRO v7 is a full-featured development board for high pin-count 8-bit PIC® microcontrollers. It features USB Type-C CODEGRIP programmer/debugger. It contains many on-board modules necessary for development variety of applications, including graphics, Ethernet, USB, data logging and other. MIKROE-4459
Rectangular NFC 40x30 Antenna is PCB antenna designed with the intention to be used as extension of development boards and placed remotely on desired place such as plastic casing, existing products, or even under displays. Antenna is designed in circular shape with diameter of 40mm. Its important to mention that this antenna can be used for NFC and RFID...
Try the WunderBar and watch how yesterday's limits of App development for iOS and Android devices start melting away like a piece of chocolate on your tongue, releasing an abundance of new possibilities that will amaze and excite you. Kit contains WunderBar board, Casing, USB cable, Li-Ion battery, Li-Ion coin cell batteries, Tacky tapes, User manual
I2C Extend 2 Click is a compact add-on board suitable for I2C communication bus extension. This board features the PCA9615, a 2-channel multipoint differential I2C bus buffer with hot-swap logic from NXP Semiconductors. The PCA9615 converts the two default I2C signals into four differential signals, two for SCL and two for SDA. The differential signals...
DRAM Click is a compact add-on board representing a dynamic random-access memory solution. This board contains the APS6404L-3SKR from AP Memory, a high-performance 64Mb SPI/KPI PSRAM memory organized as 8M x 8 bits each. This Pseudo-SRAM device features a high speed, low pin count interface and incorporates a seamless self-managed refresh mechanism to...
70 blue LEDs for displaying symbols and characters 7x10 B click is a LED dot matrix display click, which can be used to display graphics or letters in a very simple and easy way. The click board has two LED dot matrix modules with 7x5 stylish, round, dot-like LED elements. These displays produce clean and uniform patterns since the elements are...
MikroBoard for ARM 144-pin is primarily intended to be connected to the EasyARM v6 development system but can also be used as a stand-alone device.
mikroBasic PRO for dsPIC Buy now Download
NO2 2 Click is a gas sensor Click board™, equipped with the MiCS-2714, a compact metal oxide (MOS) sensor. This sensor reacts to the presence of nitrogen dioxide (NO2) and hydrogen (H2). Its impedance changes as a result of a catalytic reaction, allowing it to be used in a voltage divider configuration. This voltage can be sampled by an accurate A/D...
MCU Card is a standardized add-on board, which allows very simple installation and replacement of the microcontroller unit (MCU) on a development board equipped with the MCU Card socket. By introducing the new MCU Card standard, we have ensured the absolute compatibility between the development board and any of the supported MCUs, regardless of their pin...
Development kit for RGB LED matrix that includes: Matrix RGB click, 32x32 RGB LED Matrix Panel - 6mm pitch, 5V-3A power supply with EU plug (can power up up to two panels), accessories.
This WiFi Rubber Antenna is an excellent choice for any Click board™ that features a WiFi module. The antenna has an right angle SMA male connector on its end, which allows it to be mounted directly on the Click board™ or the female SMA module connector.
Buggy is a robot rover platform expandable with all sorts of sensors and transceivers. A dream car for hackers and makers. Multiple kits available.
DC Motor 8 click is a DC motor driver. It can drive simple DC motors with brushes, providing them with a significant amount of current and voltage up to 40V. The click has one control input, that uses the PWM signal from the host MCU. It uses the half-bridge topology to regulate the speed of the motor rotation, employs advanced dead-time circuitry that...
STSPIN250 click is a brushed DC motor driver with the current limiting and current sensing. It is based on the STSPIN250, a low voltage DC brushed motor driver. It is optimized for portable and low voltage applications, featuring the lowest standby current available on the market (max 80nA). Thanks to the low ON resistance of the MOSFETs used for its...
DC MOTOR 7 Click is a dual brushed DC motor driving Click board™, featuring the advanced PWM chopper-type integrated DC motor driver, labeled as TB67H400AFTG. This IC can drive two brushed DC motors independently, using a wide range of supply voltages, while delivering reasonably high current to the connected DC motors. This is possible due to the low...
UART I2C/SPI Click is an all-in-one solution which allows ESD-protected RS-232 connectivity to any embedded application while bridging the UART and I2C/SPI interfaces at the same time. It is equipped with the DE-9 connector, so it can be easily connected. By offering true RS-232 interface, auto hardware flow control using CTS an RTS, auto software control...
The EasyLV-18F v6 development system supports 40-, 28- and 20-pin PIC18J and PIC18K microcontroller families from Microchip. It comes with a PIC18F45K20. The system features a USB 2.0 programmer with mikroICD and many peripheral modules such as Serial RAM, EEPROM, COG Display, etc.
White Earphones, standard small stereo earphones, with high quality stereo cable and connector. They come in standard size and comfortably fit into ear. They are compatible with all of mikroElektronika mikromedia and multimedia boards.
EasyPIC PRO v7 Empty MCUcard ETH 80pin TQFP. Card is not populated with components. Pin distance 100mil.
70 red LEDs for displaying symbols and characters 7x10 R click is a LED dot matrix display click, which can be used to display graphics or letters in a very simple and easy way. The click board has two LED dot matrix modules with 7x5 stylish, round, dot-like LED elements. These displays produce clean and uniform patterns since the elements are optically...
Fusion for STM32 v8 is a development board for STM32 ARM architecture devices. It contains many on-board modules necessary for device development, including multimedia, Ethernet, USB, and others.
Brushless 12 Click is a compact add-on board suitable for controlling BLDC motors with any MCU. This board features the L6235, DMOS fully integrated 3-phase motor driver with overcurrent protection from STMicroelectronics. The L6235 combines isolated DMOS power transistors with CMOS and bipolar circuits on the same chip. It features a non-dissipative...
HVAC Click bundle - Build a particulate matter sensing solution with Sensirion’s SCD41 carbon dioxide sensor integrated within the HVAC Click board and SPS30 optical PM sensor, which will expand a range of environmental sensing solutions and open up a new dimension in indoor and outdoor air quality applications. With this bundle, you will be able to make...
Loading
Load more
Loading
