Filter Product By
Slide and select filter/s
Filtered by
MCU Card is a standardized add-on board, which allows very simple installation and replacement of the microcontroller unit (MCU) on a development board equipped with the MCU Card socket. By introducing the new MCU Card standard, we have ensured the absolute compatibility between the development board and any of the supported MCUs, regardless of their pin...
DAC 4 Click carries Microchip’s MCP4728 IC, a Quad Digital-to-Analog Converter with nonvolatile (EEPROM) Memory. The digital value is converted to the appropriate voltage level in the range between GND and VCC, which is proportional to the received 12-bit number. MCP4726 also integrates EEPROM for storing DAC register and configuration bit values. These...
EnOcean Click is a compact add-on board that adds sub-gigahertz wireless communication to your application. This board features the TCM310, a bidirectional transceiver gateway energy harvesting module from EnOcean. The TCM310 is a power-free device that does not need a battery. It can get energy from various things in the surrounding environment, such as...
DHT22 2 click is used for measuring the environmental temperature and relative humidity. It uses the AM2322 sensor, with very accurate thermal and humidity measuring capabilities. It can use either 1-Wire or I2C protocol to communicate with the integrated circuit. Attributes like the ultra-small size, low power consumption,data signal transmission...
4G LTE click is an LTE Cat 1 multimode cellular network solution, featuring the compact LARA-R2 series modem from u-blox. This module supports up two LTE bands. It also features a full range of options for the high speed cellular networking and communication, such as the network indication, full embedded TCP/UDP stack, HTTP and HTTPS transfer protocols,...
Air quality 9 Click is a compact add-on board containing a best-in-class air-quality sensing solution. This board features the ENS160, a digital multi-gas sensor solution based on metal oxide (MOX) technology with four MOx sensor elements from ScioSense. Each sensor element has independent hotplate control to detect a wide range of gases. The ENS160...
20 Position Flat Cable Assembly used for programming and general communication. This cable is 150mm long and has 1.27mm spaced connectors.
Reduce your development time considerably with mikroC, mikroBasic or mikroPascal for PIC32 compiler and EasyPIC Fusion v7 with PIC32MX795F512L MCU card. Buy EasyStart Kit - PIC32MX7 to get these goodies at reasonable price.
mikroBasic PRO for PIC32 Buy now Download
Moisture click is a Click board™ that can be used to easily detect a moisture level of the skin, by simply touching the sensitive surface of the PCB. The Click board™ is equipped with the printed copper trace sensor, which is sampled by the accurate FDC2112 IC, a 12bit capacitance to digital (FDC) converter, which employs innovative noise and EMI...
Reduce the TFT GUI development time considerably with mikroC, mikroBasic or mikroPascal for ARM and mikromedia Plus for STM32 board. Buy this kit and save money.
1-Wire I2C Click is a compact add-on board that provides an I2C interface communication over the 1-Wire interface. This board features the DS28E17, a 1-Wire-to-I2C master bridge from Analog Devices. It interfaces directly to I2C slaves in standard or fast modes of up to 400kHz. The data is transferred serially over the 1-Wire protocol, which requires only...
mikroPascal PRO for PIC Buy now Download
AudioAmp Click is a compact add-on board that can add a mono audio amplifier function to your application. This board features the LM48100Q-Q1, a Boomer™ mono 1.3W audio power amplifier with output fault detection and volume control from Texas Instruments. The AudioAmp Click has one dual 3.5mm audio input jack and, next to it, a screw terminal for...
mikroBUS Shuttle Connector is a connector used at mikroBUS Shuttle that comes in a package with dimensions of 16.5x5.1mm and has 16 pins (2x8 pins with 1.27mm row spacing). It is used to connect to the same type of header on the add-on board by a flat ribbon cable (20cm). This way, mikroBUS Shuttles allows a straightforward and elegant stacking solution...
Add a green LED display to your design. 16x12 G click carries a 16x12 LED display and the IS31FL3733 matrix driver. The click is designed to run on either 3.3V or 5V power supply. It communicates with the target microcontroller over I2C interface, and the following pins on the mikroBUS™ line: INT, RST, CS.
AM/FM Click is a RADIO RECEIVER click board™ that can be used to listen to music from the AM and FM radio bands. One of the advantages of this versatile FM broadcast stereo transmitter IC is that it is very easy to work with it, which makes it an ideal solution for using it in cellular phones, MP3 players, portable media players, wireless speakers,...
Smoke 2 Click is a compact add-on board that contains the most efficient version of the smoke detector. This board features the ADPD188BI, a complete photometric system for smoke detection using optical dual-wavelength technology from Analog Devices. The module combines the dual photodetector with two separate LEDs and a mixed-signal photometric front-end...
Secure 8 Click is a compact add-on board containing hardware-based key storage with a cryptographic accelerator to implement authentication and encryption protocol. This board features the ATECC608B, a member of the Microchip CryptoAuthentication™ family of high-security cryptographic devices with a wide array of defense mechanisms specifically designed...
MCU Card is a standardized add-on board, which allows very simple installation and replacement of the microcontroller unit (MCU) on a development board equipped with the MCU Card socket. By introducing the new MCU Card standard, we have ensured the absolute compatibility between the development board and any of the supported MCUs, regardless of their pin...
A high-quality cost-effective 4.3" TFT display with a projected capacitive touch screen and decorative cover glass (black bezel). Well integrated with MikroElektronika tools. Also available with white bezel.
2x20W Amp Click is a compact add-on board that amplifies the audio input to the desired level. This board features the MAX9744, a 20W stereo class D speaker amplifier with volume control from Analog Devices. It operates from 4.5V up to 14V and can deliver up to 20W per channel into a 4Ω speaker with a 14V external power supply. This amplifier features a...
Thermo 4 Click is a compact add-on board that accurately measures temperature. This board features the LM75A, a digital temperature sensor and thermal watchdog from NXP Semiconductor. It is an 11-bit ADC sensor that provides a temperature resolution of 0.125°C in a temperature measuring range of -55°C up to 125°C. This high-temperature resolution is...
Top performance of mighty mikromedia for PIC32 is the best choice for every kind of development. There's nothing this one can't handle.
Loading
Load more
Loading
