Filter Product By
Slide and select filter/s
Filtered by
Thermo 2 Click is a compact add-on board that accurately measures temperature. This board features the DS1825, a programmable resolution 1-wire digital thermostat from Analog Devices. The DS1825 digital thermometer provides 9 to 12-bit centigrade temperature measurements alongside the alarm function with NV user-programmable upper and lower trigger...
9DOF 2 Click is a compact add-on board for applications which require lowest power motion tracking and magnetometer functionality. This board features the ICM-20948 a 9-axis MotionTracking™ sensor from TDK Invensense, which consist of two sensors combined into one package for universal 9DOF solution. In this package we have 3-axis gyroscope, a 3-axis...
mikroProg for CEC is a fast programmer and hardware debugger. Smart engineering allows mikroProg to support the CEC cryptographic engine with secure firmware updating. Outstanding performance, easy operation, elegant design and low price are its top features. It is supported in MikroElektronika ARM compilers (mikroC, mikroBasic, and mikroPascal). This...
IrThermo 2 Click is a compact add-on board that allows contactless measurement of the object’s temperature. This board features the TMP007, an infrared thermopile sensor with an integrated Math Engine from Texas Instruments. It is a low-power, fully integrated microelectromechanical system (MEMS) that absorbs passive infrared energy from an object at...
NO2 click is a very accurate nitrogen-dioxide gas sensor Click board™, equipped with the SPEC amperometric gas sensor which electrochemically reacts with the nitrogen-dioxide (NO2). It is supported by the LMP91000, a high-precision integrated analog front-end IC (AFE), perfectly suited for use in electrochemical sensing applications. The Click board™ also...
EasyPIC PRO v7 Empty MCUcard ETH 100pin PF TQFP. Card is not populated with components. Pin distance: 100mil
SQI FLASH click is based on the SST26VF064B, a 64 Mbit Serial Quad I/O flash device from Microchip. The chip utilizes 4-bit multiplexed I/O serial interface to boost the performance. The click is a very fast solid-state, non-volatile data storage medium, that can be electrically erased and reprogrammed. Operating at 104 MHz, the SST26VF064B enables...
Accel 5 click features an ultra-low power triaxial accelerometer sensor, labeled as the BMA400. This Click board™ allows linear motion and gravitational force measurements in ranges of ±2 g, ±4 g, ±8, and ±16 g in three perpendicular axes. Besides the acceleration measurement, Accel 5 click is able to output an interrupt for many different events,...
MCU Card is a standardized add-on board, which allows very simple installation and replacement of the microcontroller unit (MCU) on a development board equipped with the MCU Card socket. By introducing the new MCU Card standard, we have ensured the absolute compatibility between the development board and any of the supported MCUs, regardless of their pin...
MCU Card is a standardized add-on board, which allows very simple installation and replacement of the microcontroller unit (MCU) on a development board equipped with the MCU Card socket. By introducing the new MCU Card standard, we have ensured the absolute compatibility between the development board and any of the supported MCUs, regardless of their pin...
ISO 9141 Click is a compact add-on board that contains a monolithic bus driver with ISO 9141 interface. This board features the L9637, a monolithic integrated circuit containing standard ISO 9141 compatible interface functions from ST Microelectronics. It’s designed to provide bidirectional serial communication compatible with ISO9141 standard. It has...
With the ECG click bundle (click + cable + electrodes) you will be able to prototype your own health-tracking and fitness devices, quantified-self wearables…
This bundle comes with the eINK click adapter and e-Paper display 2.9”. Which provides you an easy start of any project where the e-paper display is needed. The E-Ink technology is a reasonably new technology with a promising future, widely commercialized by the E-INK company. The content displayed on the E-INK (also known as E-Paper) display does not...
GNSS ZOE Click is a evaluation board for ultra small ZOE-M8Q GNSS SiP receiver from u-blox. Thanks to u-blox’s advanced algorithms and complete GNSS solution, the GNSS ZOE click meets even the most stringent requirements in versatile industrial and consumer applications, such as UAVs, vehicles and assets tracking, navigation devices based on GPS and...
eINK Click is an adapter Click board™, used to interface a compatible eINK display with the host MCU. The most distinctive feature of the eINK displays is their very low power consumption and the ability to retain the information, even after disconnecting from the power source. The power is consumed only when the display content is changing. The Click...
Atmel’s line of 8-bit AVR MCUs has been made extremely popular thanks to Arduino, but for those who want to explore the possibilities of AVR in-depth – mikroLab for AVR is the solution. This kit contains an EasyAVR v7 board that supports a total of 64 AT, ATmega, and ATtiny MCUs, a mikroC, mikroBasic or mikroPascal for AVR compiler license and free...
Tilt Click is a compact add-on board that provides positional feedback for left, right, backward or forward movement (tilt). This board features the RPI-1035, a four-directional optical tilt sensor from ROHM Semiconductor. Compared to mechanical and magnetic-based solutions, this optical direction detector is less prone to noise caused by vibrations and...
SPI Extend Click is a compact add-on board for applications that require extending the SPI communication bus over a long distance. This board features the LTC4332, an SPI slave extender device, from Analog Devices. Using a ±60V fault protected differential transceiver, the LTC4332 can transmit SPI data, including an interrupt signal, up to 2MHz over two...
Smart programmable touch display, packed with features. Vivid 7" 800x480px touch screen and over 30 on-board modules, including Ethernet, WiFi and ICDI debugger all packed onto a single board. Everything is orchestrated by the mighty STM32F746ZG ARM Cortex-M7 microcontroller family.
The SmartGM862 Board is a development board for the Telit’s GM862 GSM/GPRS module. The board includes an on-board switching power supply so that no additional power supply components are needed.
PIR Click is a pyroelectric sensor that generates a voltage when exposed to infrared radiation emitted by live bodies. It is equipped with the PL-N823-01, an infrared sensor from KEMET that uses the pyroelectric effect of ceramic by absorbing infrared rays emitted from the human body. The sensor is paired with the PL-001L-N Fresnel lens, also from KEMET,...
Convert SOIC-SOP 8 pins (300 mil wide) package to DIP 8 pins.
Proximity 2 Click is a compact add-on board providing a close-range proximity sensing solution. This board features the MAX44000, an I2C-configurable ambient light sensor with an integrated infrared proximity sensor from Analog Devices. The MAX44000 consists of an array of photodiodes that convert light into current, which the internal circuitry converts...
Loading
Load more
Loading
