Filter Product By
Slide and select filter/s
Filtered by
The EasyPULL Board features 8 pull-up/pull-down resistors with 10K or 1K values.
LP WiFi Click is a compact add-on board that represents an ultra-low-power Wi-Fi solution. This board features the DA16200, a fully integrated Wi-Fi module with ultra-low power consumption, best RF performance, and a comfortable development environment from Renesas. In addition to the highly integrated ultra-low power Wi-Fi SoC, which is the basis of this...
ROTARY R Click is a compact add-on board that allows you to add a precision input knob to your design. This board features a combination of a high-quality rotary encoder, the EC12D1564402, and a LED ring composed of 16 individual red LEDs. The 16-segment LED ring is driven by two SN74HC595 SPI-configurable 8-bit shift registers from Texas Instruments,...
Secure 3 click carries the ATSHA204A, a cryptographic coprocessor with secure hardware-based key storage from Microchip. The click is designed to run on either 3.3V or 5V power supply. Secure 3 click communicates with the target microcontroller over an I2C interface. NOTE: The click comes with stacking headers which allow you to combine it with other...
ECG 2 Click is a compact add-on board that measures the electrical activity of a beating heart through electrodes taped to the skin. This board features the ADS1194, a low-power, 8-channel, 16-bit analog front-end for biopotential measurements from Texas Instruments. The ECG 2 Click is an ECG (or EKG) machine on a Click board™ and requires little setup,...
Clicker 4 for TMPM4K All the inventions waiting to happen... Clicker 4 for TMPM4K is a compact development board designed as a complete solution, you can use it to quickly build your own gadgets with unique functionalities. IN PARTNERSHIP WITH
Note: This product is obsolete. EasyPIC Fusion v7 standard 124-pin TQFP card with PIC32MZ2048ECH MCU
LSM303AGR click is a magnetometer and accelerometer device, capable of sensing both the magnetic and gravitational field along three orthogonal axes. It uses the LSM303AGR from STMicroelectronics, an integrated MEMS IC with plenty of features that allow accurate and reliable sensing, even in presence of foreign objects made of iron and similar materials...
BLE 4 Click is fully embedded stand-alone Bluetooth 5.0 low energy connectivity module, equipped with the NINA-B312, an ultra-small, high-performing, standalone Bluetooth low energy module for easy integration of Bluetooth low energy connectivity (BLE) into various electronic devices. This module combines a high-performance Arm® Cortex®-M4 CPU...
1x8 Female Header Socket TH - 1.5mm pitch (5pcs) is a high-quality connector designed for through-hole mounting. It features eight pins in a single row and a unique 1.5mm pitch. The connector ensures a reliable connection with square contacts and has a sleek black design. Each pin is 2.4mm long, and it is sold as a 5pcs unit. NOTE: For full compatibility...
The IrDA PROTO Board allows you to connect your prototype board to IrDA wireless network by using the MCP2155 driver and TFDU4101 diode. As soon as you establish connection, data can be sent/received via IrDA wireless network.
GSR click bundle - measure the electrical activity of muscles.
3Pin Screw Terminal Connector (OSTVN03A150) is a 3-position 2.54mm pitch PCB terminal block from On-Shore Technology that provides connections for high current conductors. It can withstand current and voltage ratings up to 6A and 125VAC, ensuring reliability in power delivery applications. Based on their compact design and dimensions, 6.5x8.02x8.5...
Opto 2 click is a galvanic isolator Click board™, used to provide an optical isolation of sensitive microcontroller (MCU) pins, when operated by external signals. TLP2770 opto-isolation elements (optocouplers) can be driven with a very low current, down to 1.3mA (min). A choice of high-speed optocouplers allows Opto 2 click to be used on communication...
mikroLab for PIC is the essential toolkit for 8-bit PIC development for low pin-count chips. EasyPIC v7 – perhaps MikroElektronika’s most famous board – supports more than 380 PIC MCUs.
USB-C Sink Click is a compact add-on board that contains a standalone autonomous USB power delivery controller. This board features the STUSB4500, a USB-C sink-only controller compatible with Power-Delivery (PD) from STMicroelectronics. It supports dead battery mode to allow a system to be powered from an external source directly, establishes a valid...
The GNSS Active External Antenna is a unique multi-band type of antenna coming from u-Blox that is perfect selection for high precision GNSS applications, which require highly accurate location abilities such as RTK. The ANN-MB-00 is a multi-band (L1, L2/E5b/B2I) active GNSS antenna with 5 m cable and SMA connector. Antenna supports GPS, GLONASS, Galileo...
10-pin 0.05" ARM Cortex Debug Adapter comes with flat cable with IDC 2x5 0.05" pitch connectors The standardized connector ensures seamless integration with the CODEGRIP - World's first programmer/debugger over WiFi and USB-C, while its compact design enhances convenience for swift programming and debugging tasks.
PS/2 Connector Board is accessory board used to connect PS/2 devices to a prototype device. There is a PS/2 connector provided on the board. It enables PS/2 communication.
Altitude 2 Click is a high-resolution barometric pressure sensor add-on Click board™. It carries the MS5607, a barometric pressure sensor IC with the stainless steel cap, produced by TE Connectivity. This sensor provides very accurate measurements of temperature and atmospheric pressure, which can be used to calculate the altitude with a very high...
Tact Switch 4.5x4.5mm TH (10pcs)
Diff Press Click is an accurate pressure sensor Click board™ capable of measuring differential pressure. This Click board™ utilizes a very precise differential pressure sensor from NXP, labeled as MPXV7007DP. This piezo-resistive transducer is an advanced monolithic pressure sensor, combining advanced MEMS manufacturing technologies with on-chip signal...
The IrDA-To-PC Board is used to enable a PC to use IrDA communication. The board features MCP2120 along with TFDU4101 diode and other electronics required for connecting a PC to other IrDA devices. NOTE: This product has been moved to Legacy status, meaning it is no longer in active production or supported with updates. For continued use in similar...
9DOF 2 Click is a compact add-on board for applications which require lowest power motion tracking and magnetometer functionality. This board features the ICM-20948 a 9-axis MotionTracking™ sensor from TDK Invensense, which consist of two sensors combined into one package for universal 9DOF solution. In this package we have 3-axis gyroscope, a 3-axis...
Loading
Load more
Loading
