Filter Product By
Slide and select filter/s
Filtered by
HVAC Click is a compact add-on board that contains Sensirion’s next-generation miniature CO2 sensor. This board features the SCD41, a carbon dioxide sensor build on the photoacoustic sensing principle, and Sensirion’s patented PASens® and CMOSens® technology to offer high accuracy at a minor form factor. On-chip signal compensation is realized with the...
M-BUS RF Click is a compact add-on board that contains a complete M-BUS RF digital data transceiver. This board features the ME70-169, a wireless M-BUS module compliant with the EN13757 part4 2013 from Telit Cinterion. The ME70-169 module is a multi-channel radio board, delivering up to 1W in the 169MHz ISM unlicensed frequency band. The frequency range...
Cheap and effective home-made SMS alarm solution. Make a compact alarm device with with minimum effort using PIC clicker, GSM click, Relay click and Motion sensor board. Kit also features right angle GSM antenna, four 1x8 stacking connectors as well as 10 Wire Jumpers (female-to-female).
The SerialRAM PROTO Board enables you to add a Serial RAM device to your prototype device. A 23K640 Serial RAM device is available on-board and communicates with microcontrollers via a Serial Peripheral Interface (SPI).
DAC 3 Click is a compact add-on board with a fully-featured, highly accurate digital-to-analog converter. This board features the MCP4726, a 12-bit voltage output digital-to-analog converter from Microchip. The MCP4726 has a rail-to-rail output, low power consumption, and EEPROM as non-volatile memory for storing DAC register and configuration bit values....
The RTC PROTO Board enables you to connect your prototype device with a Real-Time Clock (RTC). The board features the PCF8583 clock/calendar circuit based on a 2048-bit static CMOS RAM organized as 256 words each consisting of 8 bits.
Click Shield for Nucleo-144 Empower your ideas with STM32 Nucleo-144 and your favorite Click boards™ Seamlessly develop with our Click Shield for Nucleo-144! Unleash the full potential of STM32 Nucleo-144 boards, coupled with mikroBUS™ sockets, granting you instant access to our extensive range of Click boards™. The possibilities are boundless - create...
Solderless breadboard with a total of 170 contact points. It’s made of black, white, red, blue and green plastics, conveniently small in size and can easily integrate into any design.
Twisted Wire (2 meters long)
TFT Proto 7" carries an 800x480 FRD070IF40-A TFT screen covered with a 4-wire resistive touchscreen panel.o drive the 262k-color display, there's an SSD1963 graphic controller with an 8/9/16/24-bit MCU interface.
Visual GLCD Buy now Download
The mikroBoard is miniature development tool which includes microcontroller, programer, small proto board and two 2x40 female headers for connection with UNI-DS6 development system.
WiFi NINA Click is a powerful standalone WiFi module, equipped with the state-of-the-art NINA-W132 module from u-blox, that can be easily configured with the u-blox s-center software, using AT commands. WiFi NINA click offers a complete WiFi stack, it is really easy to use and provides a simple way to build secure IoT applications. This WiFi module...
Pressure 21 Click is a compact add-on board that contains a board-mount pressure sensor. This board features the BMP581, an absolute barometric pressure sensor from Bosch Sensortec. The BMP581 provides a relative accuracy of ±6Pa and typical absolute accuracy of ±30Pa with ultra-low noise, low power consumption, and temperature stability alongside...
TFT Board 5 Capacitive is a 5" display board which features the standardized 2x20-pin display connector. The display board also integrates a capacitive multitouch panel with swipe and zoom gesture support. The TFT display module supports up to 24-bit pixel format (RGB: 888), allowing a true-color palette of 16,7 million colors, and resolution of 800 x...
A high-quality cost-effective 7" TFT display with a projected capacitive touch screen and decorative cover glass (black bezel). Well integrated with MikroElektronika tools. Also available with white bezel.
Hexiwear Workstation expands the functionality of Hexiwear, your favorite IoT tool In the light of Hexiwear’s global success, we decided to make a full-featured development board that expands the functionality of your favorite IoT tool. The Hexiwear Workstation is the next step in rapid IoT prototyping. Note: Hexiwear is not included in the package....
I2C to CAN Click is a compact add-on board that contains I2C to CAN-physical transceiver, which extends a single-master I2C bus through harsh or noisy environments. This board features the LT3960, a robust high-speed transceiver that extends a single-master I2C bus up to 400kbps using the CAN-physical layer from Analog Devices. One LT3960 from SCL and SDA...
MP3 2 Click is an audio decoder expansion board with on-board microSD card slot, that enables you to create your personal audio playback system. It holds the KT403A,a SOC chip solution with intergraded MCU, hardware audio MP3/WAV decoder and DSP, from Shenzhen Qianle Microelectronics Technology Co. Ltd. All the mentioned integrated hardware components...
2x5W AMP Click is a compact add-on board that amplifies the audio input to the desired level. This board features the TDA7491LP, a 2x5 watt dual BTL class-D audio amplifier from STMicroelectronics. It can produce 5W + 5W continuous output power with high efficiency (90%) over a single power supply. Four selectable fixed gain settings are available to the...
GNSS 2 Click is a compact add-on board that provides fast positioning capability. This board features the L76, an extremely compact GNSS module from Quectel Wireless Solutions. It is a concurrent GNSS receiver with multiple GNSS systems and provides simultaneous GPS, GLONASS, BeiDou, Galileo, and QZSS open-service L1 reception capability. Combining...
This is a USB 3.1 cable with USB Type C male connectors on both sides. Cable comes with USB Type C Female to USB Type A Male adapter, making it compabitle with USB 2.0 and USB 3.0 host slots as well. Cable is 1.5 meters long and compatible with the new 8th generation of Mikroe development tools.
LR IoT Click is a compact add-on board that contains a long-range transceiver. This board features Semtech Corporation’s LR1110, an ultra-low power platform integrating a LoRa® transceiver, multi-constellation GNSS, and passive WiFi AP MAC address scanner. Alongside its sub-GHz capabilities, the LR1110 also has a multi-band front-end capable of receiving...
LIN HALL Click is a compact add-on board representing a linear Hall-effect sensing solution. This board features the MLX90242, a linear Hall-effect sensor with built-in active error correction circuitry from Melexis Technologies. The MLX90242 outputs a signal proportional to the flux density of a magnetic field, further processed by the MCP3201, a 12-bit...
Loading
Load more
Loading
