Filter Product By
Slide and select filter/s
Filtered by
NFC Extend Click is NFC tag interface device with possibility of using any shape and size external antenna, offering 16 Kbit of electrically erasable programmable memory (EEPROM). This Click Board™ offer two communication interfaces. The first one is an I2C serial link and can be operated from a DC power supply. The second one is a RF link activated when...
EXPAND 5 Click features a low-voltage 24-bit I2C and SMBus I/O expander. This 24-bit I/O expander is designed to provide general-purpose remote I/O expansion for most microcontroller families via the I2C serial interface. This Click board™ features the TCA6424A from Texas Instruments, and it operates over a power supply voltage range of 1.65V to 5.5V....
Click Shield for Nucleo-144 Empower your ideas with STM32 Nucleo-144 and your favorite Click boards™ Seamlessly develop with our Click Shield for Nucleo-144! Unleash the full potential of STM32 Nucleo-144 boards, coupled with mikroBUS™ sockets, granting you instant access to our extensive range of Click boards™. The possibilities are boundless - create...
A high-quality cost-effective 5" TFT display with a projected capacitive touch screen and decorative cover glass (black bezel). Well integrated with MikroElektronika tools. Also available with white bezel.
The SmartADAPT2 with GLCD/LCD Connector Board is used to rearrange 16 I/O pins just by moving on-board jumpers in order to meet your specified needs. It features a jumper for selecting input voltage and configurable GLCD/LCD connector.
Tap inside the car diagnostic systems OBD II to DB9 cable enables you to connect with your car’s OBD-II system. You just need to plug OBD II connector on one end to your car and the other end it into some sort of hardware interface which has a DB9 connector, like our OBD II click. The overall length of the cable is five feet (152cm).
If you want to use the ZigBee wireless network than the EasyBee Board is the best solution. The board includes a high-sensitive ZigBit module with Dual Chip Antenna that enables you to easily develop your prototype device.
Reduce the development time considerably with mikroC, mikroBasic or mikroPascal for ARM® compiler and EasyMx PRO™ v7 for STM32 ARM® development system. Buy Easy Start Kit - STM32 ARM® to get these goodies at a reasonable price.
Clicker 2 for PSoC® 6 The possibilities are endless Clicker 2 is a battery-powered Click board two-seater. Inventing and putting together fully-functional standalone gadgets is now just 1% perspiration, and 99% inspiration!
This WiFi Rubber Antenna with adjustable angle is an excellent choice for any Click board™ that features a WiFi module. It can be also used with all other devices that require excellent WiFi throughput including routers, access points, etc. The antenna has an SMA male connector on its end, which allows it to be mounted directly on the Click board™ or the...
The Easy24-33 v6 development system supports 14-, 18-, 20- and 28-pin PIC24 and dsPIC33 microcontrollers from Microchip. It comes with a PIC24F16KA102. The system features a USB 2.0 programmer with mikroICD and many peripheral modules such as Touch Sense, Serial RAM, EEPROM, etc.
Oximeter 3 Click is a compact add-on board perfectly suited for measuring the blood oxygen saturation. This board features the VCNL4020C-GS08, a fully integrated high-resolution digital biosensor from Vishay Semiconductors. It combines an infrared emitter and PIN photodiode for biosensor functionality, ambient light sensor, and signal processing IC in a...
UART to I2C Click is a compact add-on board allowing connections to UART controllers and I2C targets for protocol conversion. This board features the SC18IM704, a bridge between the standard UART host interface and a serial I2C bus from NXP Semiconductors. The SC18IM704 provides a high-speed UART interface with a baud rate of up to 460.8 kbit/s and...
StartUSB for AVR Board is a small development board featuring Atmel AT90USB162 device with fast USB 2.0 support. It features connection pads for all MCU pins, as well as two prototyping areas for placing additional components.
GNSS 12 Click is a compact add-on board that provides positioning, navigation, and timing services. This board features the CAM-M8C, a professional-grade GNSS module built on the high-performing M8 GNSS engine from u-blox. This module utilizes concurrent reception of up to three GNSS systems (GPS/Galileo together with either BeiDou or GLONASS), offering...
EasyMx PRO v7 for Stellaris® ARM® is a development board for Stellaris® ARM® Cortex™-M3 and Cortex™-M4 devices. It contains many on-board modules necessary for device development, including multimedia, Ethernet, USB, CAN and other.
PAC1934 click carries the PAC1934 four channel DC power/energy monitor from Microchip. The click is designed to run on either 3.3V or 5V power supply. It communicates with the target microcontroller over an I2C interface.
The SHT1X Board features the SHT11 sensor. It is connected to a development board through a 2-wire serial interface, thus enabling you to measure temperature and humidity. Note: not recommended for new design.
GSR click can be used to measure the electrodermal activity (EDA) of the human body, also known as the galvanic skin response (GSR). EDA is actually the property of the human body that causes continuous variation in the electrical characteristics of the skin. EDA monitoring is usually combined with the monitoring of the heart rate, respiratory rate, and...
Comparator Click is a compact add-on board that contains two independent precision voltage comparators. This board features the LM2903, a dual differential comparator from onsemi. It provides two pair of screw terminals that allows you to connect separate inputs with additional ground connections, which let you use either a single (range of 2 to 36VDC) or...
Clicker 2 for Kinetis All the inventions waiting to happen... Clicker 2 is a battery-powered click™ board two-seater. Inventing and putting together fully-functional standalone gadgets is now just 1% perspiration, and 99% inspiration!
Standard empty 80-pin MCU card for EasyPIC PRO™ v7. Card is not populated with components. Pin distance 100mil.
EEPROM 5 Click is a compact add-on board that contains the highest-density memory solution. This board features the M95M04, the 4Mbit electrically erasable programmable memory organized as 524288 x 8 bits accessed through the SPI interface from STMicroelectronics. The M95M04 combines unprecedented data storage with excellent energy efficiency. It lasts...
Color 6 click is a very accurate color sensing Click board™ which features the AS73211, an XYZ true color sensor from ams. This company has developed a proprietary JENCOLOR™ filter technology, which ensures compliance to the CIE 1931/DIN 5033 standard (human eye response), providing an accurate XYZ color space response. The low noise 24bit ADCs ensure the...
Loading
Load more
Loading
