Filter Product By
Slide and select filter/s
Filtered by
EasyPIC Fusion v7 Empty MCUcard1 100pin TQFP PT. Card is not populated with components. Pin distance 100mil
40-pin ZIF FPC Connector (0.5mm pitch) SMD
CEC1702 Clicker CEC1702 clicker is a compact development board with a mikroBUS™ socket for click board connectivity and Microchip’s CEC1702 - a 32-bit ARM® Cortex™ -M4 Processor Core, with strong cryptographic support. Hundreds of possibilities with click boards.Take advantage of the constantly expanding range of over 1592 Click boards™ - the onboard...
Opto 3 click is a relay Click board™, equipped with two pairs of optically isolated solid-state relays (SSR). One pair of SSRs is used to provide a reinforced galvanic isolation for the external signals used to drive the microcontroller (MCU) pins, while the other pair of SSRs is used to allow the host MCU to drive some external equipment, allowing up to...
6DOF IMU 3 Click is a complete 6-axis detection development board suitable for movement and position tracking devices. This Click board features the compact FXOS8700CQ motion sensor from NXP, an integrated 3-axis linear accelerometer and 3-axis magnetometer combined in one package. The device supports selectable I2C or point-to-point SPI serial interface...
PS/2 Click is an adapter Click board™ that interfaces keyboard and mouse connectivity to your application. This board features the standard 6-pin Mini-DIN PS/2 connector. Even though somewhat superseded by USB, PS/2 connectors are still used. PS/2 click is especially suited for connecting vintage or certain modern high-end keyboards and mouse. One of the...
CODEGRIP for STM32 is a fast USB-C and WiFi programmer and hardware debugger. It supports STM32 Cortex M0, M3,M4 and M7 based MCUs. The package contains: Damage resistant protective box CODEGRIP for STM32 CODEGRIP ADAPT V1 - 10 pin 0.10" pitch ARM Cortex Debug adapter WiFi Antenna right angle SMA User Manual USB-C cable USB-C Female to USB-A...
The Flash 6 Click based on W25Q128JV (128M-bit) flash memory from Winbond provides a storage solution for systems with limited space, pins and power. The 25Q series offers flexibility and performance well beyond ordinary Serial Flash devices. They are ideal for code shadowing to RAM, executing code directly from Dual/Quad SPI (XIP) and storing voice, text...
Standard STM32F10x series Empty MCU Card. Card is not populated with components. Pin distance 100mil.
Thermo J Click is a temperature measurement click board™, which uses a thermocouple type-J probe, connected to a PPC-SMP-J onboard connector. The active part of the Thermo J click is MCP9600 by Microchip - a thermocouple EMF to temperature converter, with 1.5°C of maximum accuracy. The onboard PCC-SMP-J connector ensures the secure connection and accurate...
DHT22 Click is a compact add-on board providing a humidity and temperature sensing solution. This board features Aosong Electronics’s DHT22, a capacitive humidity sensing digital temperature and humidity module providing high reliability and excellent long-term stability. The DHT22 is characterized by its high accuracy (±2-5% RH and ±0.5°C over a wide...
2x40 Female Header Socket
Load Cell 4 Click is a compact add-on board that contains a resistive sensor signal conditioner with a fast power-up data output response. This board features the ZSC31014, a CMOS integrated circuit for highly accurate amplification and analog-to-digital conversion of differential and half-bridge input signals from Renesas. This Click board™ is well...
LightRanger Click is a compact add-on board for range-finding and distance-sensing applications. This board features the VL6180X, a three-in-one (proximity, ambient light, and VCSEL light source) optical module from STMicroelectronics. The VL6180X is based on ST’s patented FlightSense™ technology, which allows absolute distance to be measured...
ROTARY G Click is a compact add-on board that allows you to add a precision input knob to your design. This board features a combination of a high-quality rotary encoder, the EC12D1564402, and a LED ring composed of 16 individual green LEDs. The 16-segment LED ring is driven by two SN74HC595 SPI-configurable 8-bit shift registers from Texas Instruments,...
Hydrogen Click is a compact add-on board that can detect the presence of hydrogen. This board features an MQ-8 hydrogen (H2) sensor from Zhengzhou Winsen Electronics Technology. The gas sensing layer on the MQ-8 sensor unit is made of Tin dioxide (SnO2), an inorganic compound with lower conductivity in clean air (the conductivity increases as the levels...
CODEGRIP for PIC is a fast USB-C and WiFi programmer and hardware debugger. It supports PIC Cortex M0, M3,M4 and M7 based MCUs. The package contains: Damage resistant protective box CODEGRIP for PIC CODEGRIP ADAPT V1 - 10 pin 0.10" pitch PIC Cortex Debug adapter WiFi Antenna right angle SMA User Manual USB-C cable USB-C Female to USB-A Male...
100-pin LV-32MX v6 TQFP MCU Cards with PIC32 microcontrollers in TQFP package soldered on them. These cards are compatible with our LV-32MX v6 development systems.
3G-AA click is a versatile cellular network communication solution, featuring the compact 3G UMTS/HSPA Quectel UG95 module. This module features a full set of options for the cellular networking and communication, such as the network indication, embedded TCP/UDP stack, HTTP/HTTPS stack, full GSM/GPRS/EDGE implementation, UMTS/HSDPA/HSUPA protocol...
The LIN Board is a full-featured board for LIN bus. It includes a LIN bus transceiver MCP201 providing a physical interface between a microcontroller and LIN half-duplex bus. It is intended for use in automotive and industrial applications.
This straight 433Mhz rubber antenna with vertical polarisation extends the range of devices LoRa and OOK RX Click boards™.
mikroBasic PRO for ARM Buy now Download
mikromedia GAMING shield is an extension board pin-compatible with several mikromedia boards from mikroElektronika that enables users to provide button controls and audio interface to your base mikromedia board
Loading
Load more
Loading
