Filter Product By
Slide and select filter/s
Filtered by
Arduino Nano Click Shield The ideal solution for combining an Arduino Nano board with your favorite Click boards™ Start your project development with our Arduino Nano Click Shield fast and easy. The Arduino Nano board, in combination with the mikroBUS™ socket, provides you immediate access to hundreds of Click boards™ in our offer, allowing you to...
SMA right angle female connector for PCB
ADC 9 Click is 8th channel analog to digital converter expansion board, for projects where you have demand for multi channel ADC conversion such as microcontrollers with small number or none analog inputs. This Click board is based on MCP3564 a 24-bit Delta-Sigma Analog-to-Digital Converter with programmable data rate of up to 153.6 ksps from Microchip....
RS485 4 Click offers an UART to RS485 signal conversion, featuring the ADM2795E specialized IC with the complete galvanic isolation. Digital input and output signals are transmitted across the isolation barrier by using the ICoupler®, an IC scale transformer technology, which allows signals to be magnetically coupled across the isolation barrier within...
GPS 4 Click is a compact add-on board that provides users with positioning, navigation, and timing services. This board features the L70, a compact GPS module with ultra-low consumption and fast positioning from Quectel. This small-form-factor L1 band module operates with a frequency of 1575.42MHz, alongside accuracy of up to 2.5m, and fully addresses the...
CODEGRIP for STM32 is a fast USB-C and WiFi programmer and hardware debugger. It supports STM32 Cortex M0, M3,M4 and M7 based MCUs. The package contains: Damage resistant protective box CODEGRIP for STM32 CODEGRIP ADAPT V1 - 10 pin 0.10" pitch ARM Cortex Debug adapter WiFi Antenna right angle SMA User Manual USB-C cable USB-C Female to USB-A...
MCU Card is a standardized add-on board, which allows very simple installation and replacement of the microcontroller unit (MCU) on a development board equipped with the MCU Card socket. By introducing the new MCU Card standard, we have ensured the absolute compatibility between the development board and any of the supported MCUs, regardless of their pin...
PS/2 Click is an adapter Click board™ that interfaces keyboard and mouse connectivity to your application. This board features the standard 6-pin Mini-DIN PS/2 connector. Even though somewhat superseded by USB, PS/2 connectors are still used. PS/2 click is especially suited for connecting vintage or certain modern high-end keyboards and mouse. One of the...
ISO 9141 Click is a compact add-on board that contains a monolithic bus driver with ISO 9141 interface. This board features the L9637, a monolithic integrated circuit containing standard ISO 9141 compatible interface functions from ST Microelectronics. It’s designed to provide bidirectional serial communication compatible with ISO9141 standard. It has...
Air quality 5 Click is a triple MOS sensor on a single Click board™, which can detect gas pollution for a number of different gases. The onboard sensor is specially designed to detect the pollution from automobile exhausts, as well as the gas pollution from the industrial or agricultural industry. This Click board™ uses the MiCS-6814, a compact MOS sensor...
40-pin ZIF FPC Connector (0.5mm pitch) SMD
eINK click is an adapter Click board™, used to interface a compatible eINK display with the host MCU. The most distinctive feature of the eINK displays is their very low power consumption and the ability to retain the information, even after disconnecting from the power source. The power is consumed only when the display content is changing. The Click...
EasyPIC Fusion v7 Empty MCUcard1 100pin TQFP PT. Card is not populated with components. Pin distance 100mil
Pressure 3 Click is a compact add-on board that contains a board-mount pressure sensor. This board features the DPS310, a digital XENSIV™ barometric pressure sensor for portable devices from Infineon. It is a fast sensor with a typical measurement time of 27.6ms for Standard mode, down to 3.6ms in Low precision mode. The DPS310 has an operating range from...
DHT22 Click is a compact add-on board providing a humidity and temperature sensing solution. This board features Aosong Electronics’s DHT22, a capacitive humidity sensing digital temperature and humidity module providing high reliability and excellent long-term stability. The DHT22 is characterized by its high accuracy (±2-5% RH and ±0.5°C over a wide...
CEC1702 Clicker CEC1702 clicker is a compact development board with a mikroBUS™ socket for click board connectivity and Microchip’s CEC1702 - a 32-bit ARM® Cortex™ -M4 Processor Core, with strong cryptographic support. Hundreds of possibilities with click boards.Take advantage of the constantly expanding range of over 1592 Click boards™ - the onboard...
6DOF IMU 3 Click is a complete 6-axis detection development board suitable for movement and position tracking devices. This Click board features the compact FXOS8700CQ motion sensor from NXP, an integrated 3-axis linear accelerometer and 3-axis magnetometer combined in one package. The device supports selectable I2C or point-to-point SPI serial interface...
Standard STM32F10x series Empty MCU Card. Card is not populated with components. Pin distance 100mil.
Thermo J Click is a temperature measurement click board™, which uses a thermocouple type-J probe, connected to a PPC-SMP-J onboard connector. The active part of the Thermo J click is MCP9600 by Microchip - a thermocouple EMF to temperature converter, with 1.5°C of maximum accuracy. The onboard PCC-SMP-J connector ensures the secure connection and accurate...
2x40 Female Header Socket
6DOF IMU 14 Click is a compact add-on board that contains a 6-axis MEMS motion tracking device combining a 3-axis gyroscope and a 3-axis accelerometer. This board features the ICM-42688-P, high precision 6-axis MEMS motion tracking device, from TDK InvenSense. It has a configurable host interface that supports both I2C and SPI serial communication,...
CODEGRIP for PIC is a fast USB-C and WiFi programmer and hardware debugger. It supports PIC Cortex M0, M3,M4 and M7 based MCUs. The package contains: Damage resistant protective box CODEGRIP for PIC CODEGRIP ADAPT V1 - 10 pin 0.10" pitch PIC Cortex Debug adapter WiFi Antenna right angle SMA User Manual USB-C cable USB-C Female to USB-A Male...
ROTARY G Click is a compact add-on board that allows you to add a precision input knob to your design. This board features a combination of a high-quality rotary encoder, the EC12D1564402, and a LED ring composed of 16 individual green LEDs. The 16-segment LED ring is driven by two SN74HC595 SPI-configurable 8-bit shift registers from Texas Instruments,...
Hydrogen Click is a compact add-on board that can detect the presence of hydrogen. This board features an MQ-8 hydrogen (H2) sensor from Zhengzhou Winsen Electronics Technology. The gas sensing layer on the MQ-8 sensor unit is made of Tin dioxide (SnO2), an inorganic compound with lower conductivity in clean air (the conductivity increases as the levels...
Loading
Load more
Loading
