Filter Product By
Slide and select filter/s
Filtered by
CAN FD 6 Click is a compact add-on board containing a CAN transceiver that supports a Controller Area Network (CAN) and Controller Area Network Flexible Data-Rate (CAN FD) protocols. This board features the TCAN4550, a CAN FD controller that provides an interface between the CAN bus and the CAN protocol controller up to 5 megabits per second (Mbps) from...
This particular EasyPIC FUSION v7 ETH MCUcard contains the PIC32MZ2048EFH144 microcontroller with on-chip peripherals. It's a great choice for both beginners and professionals. After testing and building the final program, this card can also be taken out of the board socket and used in your final device.
MINI-M4 for MSP432 MINI-M4 for MSP432 is a small ARM Cortex™-M4 development board containing MSP432P401RIRGC microcontroller. This compact and powerful development board is designed to work as a standalone device or as an MCU card in DIP40 socket. MINI-M4 for MSP432 operates on a 3.3V power supply. The onboard voltage regulator allows the board to be...
Tact Switch 6x6mm (10pcs)
FingerPrint Click is a compact add-on board that interfaces a biometric security sensor with the host MCU. This board features the GTS-511E2 module from ADH Technology, one of the world's thinnest optical touch fingerprint sensors. The GTS-511E2 combines superior biometric performance and a high standard of quality components to offer a comprehensive...
Ribbon Cable 40-wire, Male/Male, 20 cm
HTU21D Click is a compact add-on board providing temperature and humidity sensing solution. This board features the HTU21D, a digital relative humidity sensor with temperature output from TE Connectivity. The HTU21D is characterized by its high accuracy (±2% RH and ±0.3°C over a wide operating temperature and humidity range) and high resolution providing...
NFC Tag 2 Click is a compact add-on board that contains a compact NFC tag IC. This board features the NT3H2111, an energy-harvesting NFC Forum Type 2 tag from NXP Semiconductor. It combines a passive NFC interface with the I2C interface, password protection, and energy harvesting. The NFC IC has built-in 888 bytes of EEPROM user memory and 64 bytes of...
This straight GSM/GPRS Straight Rubber Antenna is an excellent choice for GSM/GPRS click boards from our offer. The antenna has an SMA male connector on its end, which allows it to be mounted directly on the Click board™ or the female SMA module connector. Its compact size allows it to fit into any embedded design.
The AudioAMP Board features an on-board power amplifier LM386 designed for use in low voltage consumer applications. The quiescent power drain is only 24 milliwatts. The board can be connected to your prototype device via on-board screw terminals.
MINI-AT Board - 3.3V Believe it or not, this board is a small development system. It barely fits on your finger, but it features ATmega328, USB-UART, reset circuit and LED indicators. It’s compatible with standard DIP26 sockets. On-board voltage regulator allows the board to be powered directly from USB cable. It features 16MHz SMD crystal oscillator....
Power Monitor Click is a compact add-on board that represents an ultra-precise power monitoring solution. This board features the INA228, a digital power monitor with a 20-bit delta-sigma ADC specifically designed for current-sensing applications from Texas Instruments. The INA228 reports current, bus voltage, temperature, power, energy, and charge...
Enhance your rotary equipment with the sleek, black aluminum rotary knob. Designed for a 6mm diameter shaft, this durable knob offers easy installation, precise control, and a stylish upgrade to your setup.
The GLCD 128&64 Adapter Board is an accessory board used to connect a 128x64 graphic LCD to your development board or prototype device. The board includes a potentiometer for GLCD contrast adjustment.
AT89S8253 is CMOS 8-bit microcontroller with 12KB of ISP flash memory and 2KB of EEPROM memory...
RiBUS Click is an adapter Click board™ that allows a mikroBUS™ to interface with RiBUS compatible display modules. RiBUS is the intelligent display BUS, by Riverdi, supported by a wide range of Intelligent Display Modules equipped with powerful graphics processors. Their displays allow graphical objects control by exchanging specifically formatted...
Ambient 2 Click is a compact add-on board that measures only the visible part of the light spectrum from any source (mimicking how humans see the light). This board features the OPT3001, a digital output ambient light sensor with an I2C interface and interrupt from Texas Instruments. The sensor's spectral response tightly matches the human eye's photopic...
DC MOTOR 3 Click is a compact add-on board that controls DC motors with brushes. This board features the TB6549FG, a full-bridge driver IC for direct current motors from Toshiba Semiconductor. It can provide the DC motors with a significant amount of current of up to 2A, and a voltage from 10V up to 27V. The TB6549FG uses an LDMOS structure for output...
Quail Board Quail is an STM32-powered development solution for building hardware prototypes with Click boards™ and C# managed code. It brings together click boards and Microsoft’s .NET Micro Framework for embedded devices (NETMF). Write code for your Quail projects in Microsoft Visual Studio (free in the community edition); drivers for individual Click...
DC Motor 2 Click is a compact add-on board with a brushed DC motor driver. This board features Toshiba Semiconductor’s TB6593FNG, a PWM-type, full-bridge brushed DC motor driver. The TB6593FNG is rated for an operating voltage range from 2.5V to 13V with an output current capacity of 1A, with the motor controlled directly through a PWM signal and two...
The 3.3V-5V Voltage Regulator Board includes an on-board regulator that enables voltage to change from 3.3V to 5V with 250mA maximum output current. The board components are clearly marked so that there is no need for additional schematic.
The EasyBlueTooth Board is a low-cost solution that enables your device to easily implement wireless Bluetooth communication. Board is equipped with low-power, highly economic RN41 module, compliant with Bluetooth® 2.1/2.0/1.2/1.1 specification that can operate up to 100m distance. NOTE: The EasyBluetooth board has transitioned to Legacy status. Users...
The UMCC - Ultraminiature Coax Connector is an ultra low profile coax female to female interconnect solution that meets the ever growing demand for miniaturization in next generation wireless applications. UMCC cable are available as double-ended jumpers and inter-series assemblies, and PCB jack receptacles for board mount applications. This adapter is...
ADC 2 Click is a compact add-on board with a high-performance data converter. This board features the MCP3551, a 22-bit precision ΔΣ analog-to-digital converter with SPI compatible interface (read-only) from Microchip. The MCP3551 has fully differential analog input making it compatible with a wide variety of industrial or process control applications,...
Loading
Load more
Loading
