Filter Product By
Slide and select filter/s
Filtered by
PWM Click is a compact add-on board that controls 16 PWM outputs through a single I2C interface. This board features the PCA9685, a fully programmable 16-channels PWM controller from NXP Semiconductors. Each output channel has its 12-bit resolution (4096 steps) fixed frequency individual PWM controller that operates at a programmable frequency from a...
2x13 Male Pin Header
PIC18F4550-I/P (DIP40/20MHz). PIC18F4550 si ideal for low power (nanoWatt) and connectivity applications...
RTC board enables you to use a real-time-clock and calendar in your applications. It features an PCF8583 that keeps track of the current time even when the microcontroller is turned off.
Flash 2 click features a 64 Mbit Flash memory IC, manufactured by using the proprietary high-performance CMOS Super-Flash® technology, which allows the Flash 2 click to withstand up to 100,000 write cycles, with the data retention period of 100 years, which is considerably longer than any other memory module of this type. The flash memory IC used on this...
ROTARY B Click is a compact add-on board that allows you to add a precision input knob to your design. This board features a combination of a high-quality rotary encoder, the EC12D1564402, and a LED ring composed of 16 individual blue LEDs. The 16-segment LED ring is driven by two SN74HC595 SPI-configurable 8-bit shift registers from Texas Instruments,...
ccRF Click is a compact add-on board that contains a complete RF digital data transceiver. This board features the CC2500, a low-power, high-performance 2.4GHz OOK, 2-FSK, GFSK, and MSK transceiver from Texas Instruments. The CC2500 is configurable through SPI serial interface and operates with only 3.3V in the worldwide ISM/SRD frequency from 2400MHz up...
EEPROM 4 click is 2,097,152 bits on a click board™, organized into 262,144 bytes. In other words, this click board™ is an EEPROM memory medium with the capacity of 256 KB. The used EEPROM module has very good endurance and it can withstand 1,000,000 write cycles, with the data retaining period of about 40 years. The EEPROM module on this click can work...
GSR Electrodes designed to be used with the GSR Click and ECG/EMG cable for measuring human galvanic skin response (GSR).
This GPS Active External Antenna is a 100% waterproof external antenna, which represents an excellent choice for all GPS/GNSS Click boards™ from our offer. With its high gain, active band filtering, and magnetized base for easy installation, it is a perfect choice when reinforced positioning is required.
The HP ETH MCU card is shown on Figure 1. It contains STM32F207VGT6 microcontroller with on-chip peripherals and is a great choice for both beginners and professionals. After testing and building the final program, this card can also be taken out of the board socket and used in your final device.
mikroProg to ST-Link v2 adapter allows you to connect mikroProg for STM32 programmer and hardware debugger to 20-pin male JTAG connector on your target board. Adapter is consisted of one 2x10 male header and a 2x10 female socket.
Proximity and light sensing Proximity 3 click is an intelligent proximity and light sensing device, which features the VCNL4200 sensor from Vishay - high sensitivity long distance proximity sensor (PS), ambient light sensor (ALS) and 940 nm IRED, all in one small package. With its smart sensing and light conditioning properties, the Proximity 3 click can...
The SIM Card Holder Board enables you to connect a prototype device to a SIM card. Connection can be established in a few simple steps. The board solves your prototyping problems by offering a complete and cost-effective solution.
The SmartMP3 is an additional board that features VS1053 stereo codec used to reproduce audio files in several formats (Ogg Vorbis/MP3/AAC/WMA/FLAC/WAV/MIDI). It also contains two stereo audio connectors, speaker, microSD card slot and 2x5 male header.
Temp&Hum Click is a compact add-on board providing a temperature and humidity sensing solution. This board features the HTS221, a capacitive digital sensor for relative humidity and temperature measurements from STMicroelectronics. The HTS221 is characterized by its high accuracy (±3.5% RH and ±0.5°C over a wide operating temperature range) and high...
Combine click boards™ with ease mikroBUS Shuttle is a small add-on board, which is intended to be used with Shuttle click, in order to expand the mikroBUS™ with additional stacking options. This small add-on board has one mikroBUS™ equipped on itself and it is connected to the Shuttle click via the flat ribbon cable (20cm). One Shuttle click can support...
PIC32MX Clicker PIC32MX clicker is an amazingly compact starter development kit which brings innovative mikroBUS™ host socket to your favorite microcontroller. Board features all you need to get started: 32-bit PIC32MX534F064H microcontroller, USB connector, two LEDs and push buttons, reset button and headers for interfacing with external electronics....
MCU card with dsPIC30F6014A Microcontroller
Stepper 2 click is a complete solution for driving bipolar stepper motors with full/half and micro-steps. It features the A4988 IC from Allegro Microsystems with DMOS low RDSON drivers on its outputs, which ensure high efficiency and reliable operation of the internal H-Bridges. This IC has the integrated translator section, used to simplify the control:...
If you need a battery power supply, we have a great and compact solution. This rechargeable 250mAh 3.7V battery can deliver even more.
Thermo 3 Click is a compact add-on board that accurately measures temperature. This board features the TMP102, a high-accuracy digital temperature sensor from Texas Instruments. The TMP102 is ideal for NTC/PTC thermistor replacement, offering a high accuracy of ±0.5°C without requiring calibration or external component signal conditioning and 12-bit ADC...
Tester click is a Click board™ used as a diagnostic tool on the mikroBUS™ socket. It contains an array of 2x6 LEDs, which signalize the presence of the HIGH/LOW logic level on each pin, providing a visual feedback to the developer. Two additional LEDs indicate the presence of +3.3V and +5V on the mikroBUS™ power rails. This simple diagnostic tool can save...
Air Quality 2 Click is a compact add-on board that measures VOC levels and provides CO2 and TVOC predictions. This board features the iAQ-Core, an indoor air quality sensor module from ScioSense. It has a fast response and high sensitivity in a sensing range of 450 up to 2000 ppm CO2 equivalents and 125 to 600 ppb TVOC equivalents. The iAQ-Core offers a...
Loading
Load more
Loading
