Filter Product By
Slide and select filter/s
Filtered by
NFC Tag Click is a compact add-on board that provides NFC/RFID tag reading and writing capabilities. This board features the M24SR64-Y, a dynamic NFC/RFID tag IC with 64Kbit EEPROM from STMicroelectronics. The RF protocol is compatible with both NFC Forum Type 4 Tag and ISO/IEC 14443 Type A. There are three ways to operate NFC Tag Click: from an I2C...
MCP251863 Click is a compact add-on board representing a complete CAN solution used as a control node in a CAN network. This board features the MCP251863, an IC representing a compact solution with a CAN FD controller (MCP2518FD) and a CAN transceiver in one package (ATA6563) from Microchip. A high-speed CAN transceiver provides a physical connection with...
Ready for AVR Board Ready for AVR Board is the best solution for fast and simple development of microcontroller applications using 40-pin AVR MCUs. It comes with ATmega16 connected to 8MHz crystal oscillator. It contains four IDC10 headers for all available microcontroller ports, USB-UART module, prototyping area and a power supply circuit. Board is...
BLE TINY Click is a compact add-on board that provides BLE connectivity for any embedded application. This board features the DA14531MOD, SmartBond TINY module based on the world’s smallest and lowest power Bluetooth 5.1 System-on-Chip (SoC) from Renesas. This Click board™ is effectively future-proofed due to a combination of Bluetooth 5.1 compliance and...
Relay 2 click is a dual relay click board™, equipped with two single-pole solid state relays (SSR), built with the patented OptoMOS® technology. These SSR devices allow reasonably high current, up to 2A and voltage up to 30V (peak-to-peak). These relays also allow very fast switching time, thanks to the absence of any moving parts inside of them. Compared...
LTE IoT 5 Click is an add-on board with a compact and cost-effective secure-cloud multi-band solution designed for IoT applications. This board features the SARA-R510M8S, a cellular module that supports LTE Cat M1/Cat NB2 bands with integrated high-performance standard precision M8 GNSS receiver for global position acquisition from u-Blox. Equipped with...
The PICFlash Experimental Board makes the process of programming MCUs easier. There are 8-, 10-, 14-, 18-, 28- and 40-pin DIP sockets provided on the board. There is also an on-board 40-pin ZIF Socket for easy handling of microcontroller.
3G-EA click is a versatile cellular network communication solution, featuring the compact 3G UMTS/HSPA Quectel UG95 module. This module features a full set of options for the cellular networking and communication, such as the network indication, embedded TCP/UDP stack, HTTP/HTTPS stack, full GSM/GPRS/EDGE implementation, UMTS/HSDPA/HSUPA protocol...
ML Vibro Sens Click is a compact add-on board for motion sensing and vibration analysis. This board features the FXLS8974CF, a 3-axis low-g 12-bit digital accelerometer from NXP designed for precise motion detection and data collection. This Click board™ represents a machine learning training tool that communicates with the host MCU over an I2C interface,...
Add a Real-Time Clock (RTC) to your applications using the RTC2 Board. It features a serial real-time clock (RTC) DS1307 that is a low-power clock/calendar with 56 bytes of NV SRAM. There is also an on-board battery providing power supply backup.
MINI-M4 for Tiva™ C Series MINI-M4 for Tiva™ C Series is a small ARM® Cortex™-M4 development board containing Tiva™ C Series TM4C123GH6PM microcontroller. It perfectly fits into a standard DIP40 socket. Board is equipped with 16MHz SMD crystal oscillator, and 32.768KHz crystal which can be used for internal hibernation module. It has reset button and...
FFC flat cable 24-pin, 24cm - Used for connecting mikromedia HMI board to external electronics
OLED B Click is a compact add-on board that lets you add a small but bright and crisp display to your design. This board features the MI9639BO-B2, a 96x39px light blue monochrome passive matrix OLED display from Multi-Inno Technology. The display on OLED B Click board™ is 19.3x7.8mm with an integrated OLED controller, the SSD1306. This controller has...
MINI-32 for PIC32MZ MINI-32 for PIC32MZ is a small PIC32 development board containing the PIC32MZ1024EFH064 microcontroller (1 MB Live-Update Flash and 512 KB SRAM) with FPU from Microchip. This compact and powerful development board is designed to work as a standalone device or as an MCU card in DIP40 socket. MINI-32 for PIC32MZ development board...
The three-axis accelerometer board features a small, thin, low-power, complete 3-axis accelerometer ADXL330 with signal conditioned voltage outputs, all on a single monolithic IC.
ATA6563 Click is a compact add-on board that provides an interface between a controller area network (CAN) protocol and the physical two-wire CAN bus. This board features the ATA6563, a high-speed CAN transceiver with standby mode from Microchip. The transceiver is designed for high speeds of up to 5Mbps and provides differential transmit and receive...
Relay click 3 is a dual relay Click board, featuring two single-pole double-throw relays which can be operated by output pins of the host microcontroller (MCU). It offers an elegant and easy solution for controlling a wide range of power applications. Two SRD-5VDC-SL-C relays used on this Click board™ are hermetically sealed relays which require 5V across...
The MMC/SD Card PROTO Board enables your prototype board to be connected to Multi Media and Secure Digital Cards. There is an MMC/SD card socket provided on the board used for placing these cards.
The SHT1X PROTO Board is used to connect your prototype device with a temperature/humidity sensor. It features the SHT11 sensor that uses a 2-wire serial interface, thus enabling you to measure temperature and humidity. Note: not recommended for new design.
The EasyTEST Board is an ideal solution for connecting your prototype or development board to oscilloscope or other monitoring devices.
EasyPIC v8 EasyPIC v8 is packed in the protective box along with the relevant documentation. The package contains: Damage resistant protective box EasyPIC v8 board Adapter - USB-C Female to USB-A Male Adapter - USB Micro Female to USB-C Male USB cable Board Schematic User Manual CODEGRIP Suite Quick Start Guide MCU PIC18F47K42 and 8MHz...
RN4870 Click is a compact add-on board that provides Bluetooth wireless connectivity for any embedded application. This board features the RN4870, a Bluetooth 4.2 Low Energy module from Microchip. It integrates Bluetooth Low Energy (BLE), Bluetooth stack, and an RF power amplifier into one solution. The module uses GFSK modulation over the onboard...
The Default MCU card that comes with the EasyMx PRO™ v7 for STM32® package is shown on Figure 1. It contains STM32F107VCT6 microcontroller with on-chip peripherals and is a great choice for both beginners and professionals.
Fiber Opt Click is a compact add-on board that adds fiber-optic communication to your design. This board features one IF-D91, a fiber-optic photodiode, and one IF-E97, a fiber-optic LED, both from Industrial Fiber Optics. It provides a plastic optic connection feature over a plastic fiber cable with typical data rates of up to 512Kbps, and a maximum of up...
Loading
Load more
Loading
