Filter Product By
Slide and select filter/s
Filtered by
Fan 5 Click is a compact add-on board specially designed for fan speed management. This board features Microchip’s TC654, a PWM mode fan speed controller with FanSense™ technology suitable for brushless DC fans. This I2C-configurable controller implements temperature-proportional fan speed control, which reduces acoustic fan noise and increases fan life....
GNSS RTK 3 Click is a compact add-on board that enhances the precision of position data derived from satellite-based positioning systems. This board features the LC29HEA, a dual-band, multi-castellation GNSS module from Quectel. This module supports the concurrent reception of all five global GNSS constellations: GPS, BDS, Galileo, GZSS, and GLONASS. It...
LTE Cat.1 3 Click (for North America) is a compact add-on board for reliable 4G wireless communication. This board features the EG91NAXDGA-128-SGNS, an LTE Cat 1 IoT data-only module that meets the 3GPP Release 11 standard from Quectel. It supports multiple wireless standards, including LTE-FDD and WCDMA, ensuring broad network compatibility. Key features...
Empty PSoC MCU Cardsthat enable you to solder different PSoC microcontrollers and other electronic components you need on them.
Index Counter Click is a simple prototyping high precision Hall-Effect switch solution with direction detection. This board is hosting TLE4966K an integrated circuit dual Hall-effect sensor from Infineon. The sensor is designed specifically for highly accurate applications which use a rotating pole wheel since offers high sensitivity and high stability of...
Stepper 18 Click is a compact add-on board that contains a microstepping stepper motor driver. This board features the DRV8426, a stepper motor driver for industrial and consumer applications from Texas Instruments. It is fully integrated with two N-channel power MOSFET H-bridge drivers, a microstepping indexer, and integrated current sensing capable of...
Battery Holder for CR2032 represents a unique battery holder (SN2032) that allows you to maintain good contact with the battery and facilitates simple replacement. This battery holder is suitable for a non-rechargeable (primary) coin-cell battery, CR2032 lithium coin cell battery (20mm diameter x 3.2mm thickness). The SN2032 comes with three mounting pads...
Accel 28 Click is a compact add-on board that contains an acceleration sensor. This board features the LIS2HH12TR, an ultra-low-power high-performance three-axis accelerometer from STMicroelectronics. It allows selectable full-scale acceleration measurements in ranges of ±2g, ±4g, and ±8g in three axes with a configurable host interface that supports both...
LTE Cat.1 3 Click (for Europe) is a compact add-on board for reliable 4G wireless communication. This board features the EG91EXGA-128-SGNS, an LTE Cat 1 IoT module that meets the 3GPP Release 11 standard from Quectel. It supports multiple wireless standards, including LTE-FDD, WCDMA, and GSM, ensuring broad network compatibility. Key features include...
Speaker 2 Click is a compact add-on board for high-quality audio playback and voice prompt applications. This board features the ISD2360, a 3-channel digital ChipCorder® from Nuvoton, which integrates flash memory for non-volatile audio storage and playback. The ISD2360 supports up to 64 seconds of audio storage with digital decompression, independent...
EasyMx PRO v7 for Tiva C Series Empty MCU card for 100-pin TQFP TM4C123 series. Card is not populated with components. Pin distance 100mil.
6-pin Needle Cable is a compact programming cable made from high-quality materials for longevity and easy portability with a tiny square footprint, similar to a 0805 resistor. Designed for quick programming and debugging, it features a 6-pin 0.1″ pitch ribbon connector and is hand-held or temporarily fixable. Use the 6-pin Needle Cable to extend the...
ISM 5 Click is a compact add-on board designed for seamless integration into a wide range of applications requiring efficient communication in the Sub-GHz 868MHz frequency band. This board features the Si4461, a high-performance, low-current transceiver from Silicon Labs known for its robust operation in time division duplexing (TDD) mode, enabling...
Compass 8 Click is a compact add-on board designed for precise compass applications. This board features the AK09919, a 3-axis electronic compass IC from AKM Semiconductor. The AK09919 is based on high-sensitivity Hall sensor technology for detecting terrestrial magnetism across the X, Y, and Z axes, has multiple operational modes, a built-in oscillator,...
Heart Rate 13 Click is a compact add-on board for precise and reliable vital sign monitoring. This board features the SFH 7074, a biomonitoring sensor from ams OSRAM, with signal processing handled by the ADPD1080 photometric front-end from Analog Devices. The SFH 7074 is optimized for photoplethysmography (PPG) applications, featuring a strong optical...
3D Hall 13 Click is a compact add-on board designed for contactless 3D magnetic field sensing and precise angular position measurements. It is based on the TMAG3001, a low-power 3D linear Hall-effect and angle sensor from Texas Instruments with integrated CORDIC engine and 12-bit ADC. This Click board™ supports I2C communication up to 1MHz and features...
MCU Card is a standardized add-on board, which allows very simple installation and replacement of the microcontroller unit (MCU) on a development board equipped with the MCU Card socket. By introducing the new MCU Card standard, we have ensured the absolute compatibility between the development board and any of the supported MCUs, regardless of their pin...
1-Wire Switch Click is a compact add-on board that allows you to switch a device remotely using a 1-wire signal. This board features the DS2413, a dual-channel programmable I/O 1-Wire switch from Analog Devices. Communication and operation of this Click board™ are performed with the single 1-Wire serial interface, with the possibility of selecting signals...
Magneto 14 Click is a compact add-on board with an accurate and reliable magnetic device. This board features the MA735, a contactless angle sensor with ABZ, and PWM output from Monolithic Power Systems. The MA735 sensor has a 9-bit to 13-bit resolution of the absolute angle encoder. With its fast data acquisition and processing, it provides accurate...
Pressure 23 Click - 07BA is a compact add-on board for accurate and reliable absolute pressure and temperature measurements in harsh environments. This board features the MS5849-07BA, an ultra-compact, chlorine-resistant sensor from TE Connectivity that delivers 24-bit resolution data via I2C or SPI interfaces. It operates within pressure ranges of 0.4 to...
NFC 7 Click - SPI is an add-on board that integrates NFC functionality in various applications. This board features the PN7160 (PN7160B1HN/C100E), a Near Field Communication (NFC) controller from NXP that is compliant with NFC Forum and NCI 2.0 standards. The board features an SPI communication interface, low-power consumption modes, and a new-generation...
Temp&Hum 27 Click is a compact add-on board designed for measurement of temperature and relative humidity in both industrial and automotive environments. It is based on the HS4001 from Renesas, a high-performance MEMS sensor with fully calibrated and temperature-compensated digital output. This sensor features NIST-traceable calibration, ISO/IEC...
Build your own programmable timer relays using AVR-Ready, Keypad 4x4 board with EasyPull, RTC, Relay 4 and LCD 2x16 character display with adapter. Just load the demonstration project code and your device is ready to control 4 separate relays.
mikroLab for FT90x is a complete – and only – solution for developing with FTDI Chip’s FT90x line of MCUs. The kit contains an EasyFT90x v7 board, a mikroC for FT90x compiler license, additional accessories, and a free license for Visual TFT (valued at $99).
Loading
Load more
Loading
