Filter Product By
Slide and select filter/s
Filtered by
YOU GET EVERYTHING YOU NEED Camera for streaming Planet Debug FRAME contains an IP camera with a high resolution of 2592x1944px. You can change settings such as contrast, sharpness, and orientation. And even though this camera is fixed, you can adjust focus and zoom. This camera will provide a visible, fixed angle of view, making it easy to...
Inclinometer 2 Click is a compact add-on board that measures the orientation angle of an object with respect to the force of gravity. This board features the IIS2ICLX, high accuracy, and resolution two-axis inclinometer from STMicroelectronics. It allows selectable full-scale measurements in ranges of ±0.5/±1/±2/±3g in two axes with a configurable host...
I2C MUX 6 Click is a compact add-on board representing a bidirectional selector dedicated to I2C slave address conflicts applications. This board features the PCA9518, an expandable four-channel bidirectional buffer controlled by the I2C-bus from Texas Instruments. The PCA9518 overcomes the restriction of maximum bus capacitance by separating and...
HW Monitor 2 Click is a compact add-on board used to monitor and regulate the performance of various hardware components within an embedded system. This board features the AMC80, an I2C-configurable system hardware monitor from Texas Instruments that contains a 10-bit ADC capable of measuring seven positive voltages and local temperature. The AMC80 also...
DIGI POT 13 Click is a compact add-on board that contains a digitally controlled potentiometer. This board features the MAX5419, a 256-tap non-volatile digital potentiometer from Analog Devices. On this Click board™, one digitally I2C-controlled potentiometer is realized with typical end-to-end resistance values of 200kΩ. It can operate from both 3.3V and...
Color 18 Click is a compact add-on board for accurate ambient light detection and flicker monitoring. This board features the TCS3530, a true color ambient light sensor from ams OSRAM. The TCS3530 features true color XYZ sensing, flicker detection up to 7kHz, and eight concurrent sensing channels with independent gain configurations. It also includes a...
Heart Rate 13 Click is a compact add-on board for precise and reliable vital sign monitoring. This board features the SFH 7074, a biomonitoring sensor from ams OSRAM, with signal processing handled by the ADPD1080 photometric front-end from Analog Devices. The SFH 7074 is optimized for photoplethysmography (PPG) applications, featuring a strong optical...
Temp-Log 5 click is a temperature measuring Click board™ featuring the CAT34TS02, an accurate temperature sensor IC with integrated Serial Presence Detect EEPROM. Temperature Sensor measures and store temperatures at least 10 times in second. Temperature measurement results can be retrieved by the host MCU via I2C interface, and are compared to critical...
TFT Color Display with Touch Screen (4.3") and frame is a color active matrix thin film transistor(TFT) liquid crystal display (LCD).
This one is for all Click board™ users but also people who love to wear fun colors. It is this beautiful pine green color with the large inscription CLICK MAN on the front and the MIKROE logo on the left sleeve. We can say that these T-shirts are one of the favorites among our colleagues - you can catch a lot of us wearing them to work. FEMALE SIZES...
DC Motor 26 Click is a compact add-on board with a brushed DC motor driver. This board features the TB9053FTG, a PWM-type, dual-channel, H-bridge, brushed DC motor driver from Toshiba Semiconductor. The TB9053FTG is rated for an operating voltage range from 4.5V to 28V, with the motor controlled directly through a PWM signal or SPI serial interface. In...
Opto Encoder 4 Click is a compact add-on board that contains an optical sensor/encoder that can be used for movement or rotation encoding. This board features the EE-SX4330, a transmissive photo-microsensor from OMRON. It is intended to be used with an encoder disk or similar device that will act as a barrier between the emitter and detector of the...
Dot Matrix R Click is a display device Click board™ based on a four-digit dot matrix display module, labeled as HCMS-3906 from a company Avago (Broadcom Inc). The module holds four 5x7 dot matrices, with very closely spaced, bright red pixel elements. Characters are very clearly displayed as a result. Pixels emit a bright red color when lit, which makes...
DAC 11 Click is a compact add-on board that contains a highly accurate digital-to-analog converter. This board features the DAC128S085, a general-purpose OCTAL 12-bit analog voltage-output DAC from Texas Instruments. It uses both logic voltage levels from the mikroBUS™ socket with a maximum power consumption of 4.85mW at 5V. The on-chip output amplifiers...
Barometer 7 Click is a compact add-on board used to measure air pressure in a specific environment. This board features the KP264XTMA1, a high-accuracy digital barometric air pressure sensor based on a capacitive principle from Infineon Technologies. The KP264XTMA1 is surface micromachined with a monolithic integrated signal conditioning circuit...
Flash 9 Click is a compact add-on board that contains a highly reliable memory solution. This board features the W25Q02JV, an SPI configurable serial Flash memory solution from Winbond Electronics. It represents a four 512Mb stack die supporting linear addressing for the full 2Gb memory address range, offering flexibility and performance well beyond...
USB 2.0 Micro Female to USB Type C Male Adapter represents a high-speed type C connector that converts the USB-C 2.0 micro head data into the ordinary USB 2.0 data cable. It has a data transfer rate of up to 480Mbps and supports high-power charging and quick data transfer alongside a reversible plug orientation and cable direction. Based on its compact...
Piezo Buzzer (EPT-14A4005P) is an electronic device used to produce a tone, alarm, or sound from Sanco Electronic. This TH buzzer has a resonant frequency of 4000Hz, draws a maximum current of 2mA, and is an excellent choice for various applications including alarms and warning systems in automobiles and consumer electronics, and much more, thanks to its...
NeoMesh Click - 868MHz is a compact add-on board with a low-power, long-range transceiver, ideal for Mesh wireless networking. This board features the NC1000C-8, a wireless Mesh network module from NeoCortec. With an additional antenna that MIKROE offers connected to the module’s u.Fl connector, you can create a fully functional wireless Mesh network node...
Adapter - USB-C Female to USB-B Male represents a high-speed type C connector that converts the USB-C head data into the USB 2.0 Type B data. This adapter offers data transfer speeds of up to 480Mbps between connected devices and comes with a built-in 56kΩ pull-up resistor for safer and more reliable quality. Its compact design and dimensions provide an...
EasyAVR v8 EasyAVR v8 is packed in the protective box along with the relevant documentation. The package contains: Damage resistant protective box EasyAVR v8 board Adapter - USB-C Female to USB-A Male Adapter - USB Micro Female to USB-C Male USB cable Board Schematic User Manual CODEGRIP Suite Quick Start Guide MCU PIC18F47K42 and 8MHz...
Current 11 Click is a compact add-on board for industrial and commercial current-sensing applications. This board features the ACS37600K (ACS37600KOKATN-006B5-C), a programmable linear Hall-effect sensor IC from Allegro Microsystems. This sensor features a chopper-stabilized Hall-effect front-end for precise magnetic flux detection, with a sensitivity of...
LV-24-33 v6 80-pin TQFP 2 MCU Card Empty PCB
Loading
Load more
Loading
