Large 320x240 TFT Color Display with Touch Screen and Stereo MP3 Codec chip with great performance give you true power to build full multimedial applications.
Board is carefully designed and is very compact and handy. We have used the highest quality components and 4-layer PCB to achieve maximum efficiency.
Charge your batteries directly from USB port. No additional electronics, or expensive adapters. Just plug-in the cable, and this little board will handle the rest.
You can save pictures, sounds and other media files on microSD memory card and 8Mbit Serial Flash Memory and use it in your application.
This board provides a compact high-quality multimedia development platform for LM3S9B95 device. It has numerous on-board modules, that allow you to write multimedia applications. This board can be used for both development or as a final product.
All you need to get started: Examples, manuals, and bootloader application. Download examples and load them in your mikroMedia to see how it works. Examples demonstrate each on-board module and are a great starting point for your future mikroMedia projects.
Examples are written for all mikroElektronika ARM compilers: mikroC, mikroBasic and mikroPascal. They are well commented and each example contains working HEX file which you can load and use right away. Examples are available on the Libstock™ website.
Hover your cursor over the desired module and instantly get more information. Get to know your board even before you buy it. Become a mikroMedia geek.
On-board ADXL345 Digital Accelerometer allows you to measure acceleration.
Plug-in your headphones and listen to audio output from mp3 decoder circuit.
MCP73832 Battery Charger circuit enables you to charge your Li-Polymer battery directly from USB port.
Li-Polymer battery connector allows you easier connection with your battery. Autonomous power supply will give your mikromedia the wings it deserves.
Every unsused microcontroller pin is available through connection pads. They can be used to connect your mikromedia board with additional shields or accessory boards.
8Mhz crystal oscillator circuit that provides external clock is connected to microcontroller osc pins.
If you place battery shield or integrate your board so that only front TFT is accessible, this reset button can be very handy.
Pads for connecting and programming the board with mikroProg for Stellaris® external programmer.
80-MHz operation; 100 DMIPS performance, Nested Vectored Interrupt Controller (NVIC), 256 KB Flash memory up to 50 MHz; 96 KB SRAM, and more.
microSD Card slot allows you to store large ammounts of data externally on microSD card using fast SPI communication.
LM3S9B95 with USB OTG support, allows you to communicate with a PC or other USB devices using USB connection.
VS1053 MPEG audio decoder with SPI interface for fast reproduction of MP3 files.
We have added power indicator LED, so you can be sure whether your board has stable power supply.
On-Board power regulator ensures that each part of the board get the right voltages.
High quality reset button with surrounding reset circuitry ensures stable reset operation.
Store up to 8 Mbit of data in EN25F80 Serial Flash Memory with 25 MHz SPI Bus Interface. It suports over 100,000 Erase/Program Cycles per Sector and has over 20 Year Data Retention.
320x240 TFT Color Display with Touch Panel can display vivid and clear color images or advanced graphic content.
Although your mikromedia comes preprogrammed with bootloader, this may not be enough for you. For serious development you need a good debugger. And this is where mikroProg comes handy. It’s fast USB programming and debugging capabilities, outstanding performance and ease-of-use are just what you need. [more info]
mikroMedia for Stellaris® M3 is packed in the protective box along with the relevant documentation and product DVD. This box is very resistant to all kinds of damages and shocks. The package contains:
mikroMedia for Stellaris® M3
board in antistatic bag
USB cable and 3 headers
(2x5 and a pair of 1x26)
and Board Schematic
DVD with documentation
and code examples
Secure online payments provided by 2Checkout.com, Inc. All credit card and personal details are kept secure, and our customer list is not disclosed to any third party.
We deliver our products to all countries in the world using following shipping options:
DHL Express: $25.00 USD for up to 5 Kg, usually arrives in 2-4 business days.
Post Office $25.00 USD for up to 5 Kg, usually arrives in 7-12 business days.
Note: Please contact local office of the chosen courier about delivery service and possible additional charges.
CUSTOMIZATION: We can modify our products to suit your requirements, click here for details.