Board contains ten basic groups of analog components which will help you master analog engineering in fun and easy way.
We’ve carefully planed the silkscreen markings, and drew components just as you are used to in your classes.
Components used in this board are chosen to withstand thousands of hours of work, so many generations of students can learn on a single board.
We especially designed the manuals to be your guide, with fourteen practical examples and interesting projects for young engineers.
ASLK PRO has been produced by mikroElektronika for Texas Instruments. This kit is designed for undergraduate engineering students to perform analog lab experiments. The main idea behind ASLK PRO is to provide a cost efficient platform or test bed for students to realize almost any analog system using general purpose ICs such as OP-Amps and analog multipliers.
Eleven sections on the board for 14 fantastic experiments
ASLK PRO comes with three general-purpose operational amplifiers (TL082) and three wide-bandwidth precision analog multipliers (MPY634) from Texas Instruments. We have also included two 12-bit parallel-input multiplying digital-to-analog converters DAC7821, a wide-input non-synchronous buck-type DC/DC controller TPS40200, and a low dropout regulator TPS7250 from Texas Instruments. A portion of ASLK PRO is left for general-purpose prototyping which can be used for carrying out mini-projects.
Analog System
Lab Kit PRO
from Texas Instruments,
produced by mikroElektronika
All you need to get started: user-friendly manual which guides you through 14 great laboratory exercises which help you to understand on-board modules through interesting and useful experiments. These examples are a great starting point for your future projects. User manual is easy to read, with good explanations and lots of photos. We also provided a full-color board schematics and a 100-page graph paper book with linear and logarithmic grid, for easier drawings of graphs required by the experiments.
Hover your cursor over the desired module and instantly get more information. Get to know your board even before you buy it.
Three analog multipliers are included in the kit. These are wide-bandwidth from Texas Instruments (MPY634). Each multiplier is a 14-pin IC and operates on internally provided +/-10V supply.
Three analog multipliers are included in the kit. These are wide-bandwidth from Texas Instruments (MPY634). Each multiplier is a 14-pin IC and operates on internally provided +/-10V supply.
Three analog multipliers are included in the kit. These are wide-bandwidth from Texas Instruments (MPY634). Each multiplier is a 14-pin IC and operates on internally provided +/-10V supply.
General Purpose Area with 2.54mm/100mil pad spacing can be used to place additional components and expand set of excersises with new experiments.
There are two digital-to-analog converters (DAC) provided in the kit. Both are DAC7821 from Texas Instruments. They are 12-bit, parallel-input multiplying DACs.
There are two digital-to-analog converters (DAC) provided in the kit. Both are DAC7821 from Texas Instruments. They are 12-bit, parallel-input multiplying DACs.
We have included two diode sockets on the board, which can be used as rectifiers in custom laboratory experiments. Two 1N4448 small signal diodes are delivered with the board.
The kit has screw terminals to connect +/-10V power supply. All the ICs on the board are internally connected to power supply.
Three TL082 OP-Amps are available on the board. Each IC has two amplifiers which are labeled A and B. OP-Amps Type I can be connected in the inverting configuration only.
Three TL082 OP-Amps are available on the board. Each IC has two amplifiers which are labeled A and B. OP-Amps Type II can be configured to act as inverting or non-inverting.
Three TL082 OP-Amps are available on the board. Each IC has two amplifiers which are labeled A and B. OP-Amps Type III can be used as voltage buffers.
TPS40200 is a non-synchronous buck converter which can be used to provied a resistor-selected 3.3V or 5V output, that deliveres up to 2.5A from up to 16V input bus.
Low dropout linear voltage voltage regulator is capable of 200mA output current at 5V fixed output voltage level. It is a low quiescent current, low noice, high PSSR, fast start-up LDO.
Board comes with 2N3906 PNP and 2N3904 NPN general purpose bipolar transistors as well as BD250 P-channel MOS FET transistor.
There are two 1kO trimmers in the kit to enable the designer to obtain a variable voltage if needed for a circuit. These operate respectively in range from 0V to +10V, and -10V to 0V
Analog System Lab Kit PRO is packed in the protective box along with the relevant documentation. This box is very resistant to all kinds of damages and shocks. The package contains:
Damage resistant
protective box
ASLK PRO board in
antistatic bag
Manual, Schematic and
Graph paper book
Wire jumpers,
transistors and diodes
As part of its mission of facilitating world-class technology into electronic engineering course curricula, TI European University Program will donate up to 10 ASLK PRO boards per university. If you are a university professor or lecturer, you like Analog System Lab Kit PRO and want to introduce it into your teaching course, you can apply for a donation. In order to submit the donation application, please fill out the following form and you are going to be contacted by TI University Program Manager. This offer is limited to EU countries only.
After you have been contacted by TI University Program, your application is going to be evaluated. If you are eligible for the donation, you can apply for up to 10 boards per university. Shipping costs and handling fee are covered. Please contact your local DHL office about delivery service and possible import duties.
All credit card and personal details are kept secure, and our customer list is not disclosed to any third party. Most shipments are sent within 48 hours of your order. 2Checkout.com is an authorized reseller of goods and services provided by mikroElektronika.
We deliver our products to all countries in the world using following shipping options:
DHL Express: $25.00 USD for up to 5 Kgs, usually arrives in 2-4 business days.*
Post Office: $25.00 USD, no weight limit, usually arrives in 7-12 business days.
* - Please contact your local DHL office about delivery service and possible additional charges.
Analog System Lab Kit PRO
$149.00 USD
