Filter Product By
Slide and select filter/s
dsPIC-Ready4 Board is the best solution for fast and simple development of 28-pin dsPIC30F microcontroller applications (dsPIC30F1010, dsPIC30F2020 etc.). It includes connectors for connecting the dsPICprog with mikroICD in-system stand-alone programmer. These connectors enable you to program microcontrollers without any other additional devices. There are also IDC10 connectors linked to the microcontroller pins provided on the bpard. They enable many peripheral modules to be connected to the board, so you can quickly assemble functional working environment that perfectly suits your needs.
dsPIC-Ready4 Board features a USB to serial UART interface FT232R which simplifies USB to serial designs and reduces external component count by integrating an external EEPROM, USB termination resistors and a clock circuit requiring no external crystal into the device.
Clicker 2 is a battery-powered Click board two-seater. Inventing and putting together fully-functional standalone gadgets is now just 1% perspiration, and 99% inspiration!
MINI-M4 for Stellaris is a small ARM® Cortex™-M4 development board containing LX4F230H5QR microcontroller. It is pin compatible with PIC16F887 and PIC18(L)F45K20 microcontrontrollers and it perfectly fits into standard DIP40 socket. Board is equipped with 16MHz SMD crystal oscillator, and 32.768KHz crystal which can be used for internal RTCC module. It has reset button and three signal LEDs.
Board comes preprogrammed with fast USB HID bootloader, so no external programmers are needed for development. It operates on 3.3V power supply. On-board voltage regulator allows the board to be powered directly from USB cable.
STM32 M4 clicker is an amazingly compact starter development kit which brings innovative mikroBUS™ host socket to your favorite microcontroller. Board features all you need to get started: 32-bit STM32F415RG microcontroller, USB connector, two LEDs and push buttons, reset button and headers for interfacing with external electronics.
Programming. To make your prototyping experience as convenient as possible, STM32 M4 clicker is preprogrammed with a USB HID bootloader. Just download our USB HID Bootloader application and you’re ready to upload your firmware. On-board ARM Cortex JTAG/SWD connector enables programming through external programmer/debugger.