Filter Product By
Slide and select filter/s
MINI-M4 for Stellaris is a small ARM® Cortex™-M4 development board containing LX4F230H5QR microcontroller. It is pin compatible with PIC16F887 and PIC18(L)F45K20 microcontrontrollers and it perfectly fits into standard DIP40 socket. Board is equipped with 16MHz SMD crystal oscillator, and 32.768KHz crystal which can be used for internal RTCC module. It has reset button and three signal LEDs.
Board comes preprogrammed with fast USB HID bootloader, so no external programmers are needed for development. It operates on 3.3V power supply. On-board voltage regulator allows the board to be powered directly from USB cable.
STM32 M4 clicker is an amazingly compact starter development kit which brings innovative mikroBUS™ host socket to your favorite microcontroller. Board features all you need to get started: 32-bit STM32F415RG microcontroller, USB connector, two LEDs and push buttons, reset button and headers for interfacing with external electronics.
Programming. To make your prototyping experience as convenient as possible, STM32 M4 clicker is preprogrammed with a USB HID bootloader. Just download our USB HID Bootloader application and you’re ready to upload your firmware. On-board ARM Cortex JTAG/SWD connector enables programming through external programmer/debugger.
PIC-Ready2 board is a prototype board for 18-pin PIC microcontrollers. The board features a USB support with an on-board USB to serial UART interface device FT232R.
There are also IDC10 connectors linked to the microcontroller pins provided on the board. They enable many peripheral modules to be connected to the board, so you can quickly assemble functional working environment that perfectly suits your needs.
Three connectors for each port
Hexiwear Workstation allows you to connect Hexiwear to the outside world. Buttons, LEDs and three headers for each group of pins, are the connectivity arsenal you need.
Everything is already here
mikroProg on board
Powerful onboard mikroProg OpenSDA programmer and In-Circuit debugger can program and debug a docked Hexiwear. You will not be able to imagine development without it.
Two audio amplifiers
The Hexiwear Workstation comes equipped with two audio amplifiers. They are used to amplify the line level sound from the VS1053, a stereo MP3 audio CODEC IC.
mikroBUS sockets on board
Supports Click boards™
Four innovative new mikroBUS sockets allow you to use 827 of Click boards™ with almost no hardware adjustments. Adding new functionality to your device was never so easy.