Nordic nFR24L01 Click - Working Code
Posted: 07 Apr 2024 04:26
Basic Tx and Rx for the nRF24 C click. - Working Code.
The set up is:
* EasyPIC Fusion v7
* PIC32MX795F512L at 80MHz
* nRF C click in left MikroBUS 1 socket
* SPI3 and UART5/USB UART B at 57600Baud
* LED RG0 flashes on Tx and Rx.
* Easy TFT used
Similar code posted before but tided up and improved here (I hope?)
Regards Bill Legge in Australia
The set up is:
* EasyPIC Fusion v7
* PIC32MX795F512L at 80MHz
* nRF C click in left MikroBUS 1 socket
* SPI3 and UART5/USB UART B at 57600Baud
* LED RG0 flashes on Tx and Rx.
* Easy TFT used
Similar code posted before but tided up and improved here (I hope?)
Regards Bill Legge in Australia