Filter Product By
Slide and select filter/s
Filtered by
EasyPIC v8 for PIC24/dsPIC33 EasyPIC v8 for PIC24/dsPIC33 is packed in the protective box along with the relevant documentation. The package contains: Damage resistant protective box EasyPIC v8 for PIC24/dsPIC33 board Adapter - USB-C Female to USB-A Male Adapter - USB Micro Female to USB-C Male USB cable Board Schematic User Manual CODEGRIP...
Brushless 24 Click is a compact add-on board for controlling brushless DC (BLDC) motors with any MCU. This board features the DRV10866, a 3-phase sensorless motor driver from Texas Instruments with integrated MOSFETs capable of driving current up to 800mA in peak. The DRV10866 also has a 150° sensorless BEMF control scheme implemented for a 3-phase...
GNSS L-Band Active Antenna (LBAND01D-S6-00) is an active patch antenna from Inpaq Technology, optimized for the GNSS L-Band. The antenna has a 3m cable with SMA PLUG male connector on the end, allowing easy positioning. This is the right product if you want a perfect active antenna for positioning and timing system applications. NOTE: Order on Request...
Accel 27 Click is a compact add-on board that contains an acceleration sensor. This board features the ADXL373, a three-axis MEMS ±400g accelerometer from Analog Devices. In addition to its ultra-low power consumption, the ADXL373 enables impact detection while providing system-level power reduction. It offers 12-bit output data at 200mg/LSB scale factor...
Buck 15 Click is a compact add-on board for precision voltage regulation across various applications. This board features the TPS62903, a synchronous step-down DC/DC converter from Texas Instruments. It is known for its adaptability, rapid transient response, and high output voltage accuracy of ±1.5% across all operating temperatures. Featuring the...
EEPROM 16 Click is a compact add-on board designed for reliable non-volatile memory storage in automotive and industrial systems. This board features the NV25320LV, a 32Kb Serial EEPROM from onsemi, organized as 4K x 8 bits. It uses SPI communication, supports both software and hardware write protection, and includes a 32-byte page write buffer for...
The essential development kit for all your graphic interface projects Open the box full of wonders. Start development right away, everything you could need is there. It’s the perfect toolbox - the mikromedia workStation v7 is the best development environment for mikromedia boards – your stepping stone. The Visual TFT software and compiler license will...
MCU Card is a standardized add-on board, which allows very simple installation and replacement of the microcontroller unit (MCU) on a development board equipped with the MCU Card socket. By introducing the new MCU Card standard, we have ensured the absolute compatibility between the development board and any of the supported MCUs, regardless of their pin...
PAC1720 Click is a compact add-on board that contains an energy monitoring solution. This board features the PAC1720, an I2C configurable dual high-side bidirectional current sensing monitor with precision voltage measurement capabilities from Microchip Technology. The PAC1720 measures the voltage developed across external sense resistors to represent the...
VU Meter Click is a compact add-on board representing a volume unit meter that displays the intensity of an audio signal. This board features the LM3914, a monolithic integrated circuit that senses analog voltage levels and drives a 10-segment bar graph display from Texas Instruments. This Click board™ is manufactured with a sound detecting device...
Cooler Click is a compact add-on board designed as a cooling solution to manage heat in electronic systems efficiently. This board features the DRV8213, a brushless DC motor driver from Texas Instruments, ensuring a high-performance operation. This board also directly integrates a TMP007 temperature sensor and an MF25060V2-1000U-A99 cooling fan onto its...
Light 2 Click is a compact add-on board designed for accurate and flexible light measurement in various environments. This board features the ISL76682, a high-sensitivity, light-to-digital sensor with an I2C interface from Renesas, made specifically for automotive applications. Key features include a photodiode array that closely mimics the human eye's...
Plastic enclosure for Clicker 4 (the C7016014 from OKW) is designed to protect and securely house Clicker 4 products from MIKROE. This two-piece enclosure features a durable ABS/PC construction, offering high resistance to dust, water, and impacts, meeting IP 66, IP 67, and IK 07 protection standards. It includes a transparent top for the visibility of...
BL653 Click is a compact add-on board for long-range Bluetooth Low Energy (LE) connectivity in next-generation industrial IoT applications. This board features the BL653 module from Ezurio and is powered by Nordic’s nRF52833 silicon; it integrates a powerful Cortex-M4F microcontroller with 512kB flash memory and 128kB RAM. It supports Bluetooth v5.4...
Glass Indoor Solar Cell (1-cell) – 41x26mm (AMG-1401C), commonly known as Amorphous Silicon Solar Cell (Amorton), is a hydrogenated amorphous silicon (a-Si:H) solar cell designed for energy harvesting in indoor environments. The high-performance AMG-1401C solar cell is built on a glass substrate for optimal efficiency and durability. With a nearly perfect...
6DOF IMU 26 Click is a compact add-on board designed to detect and measure angular rate and linear acceleration across three axes. This board features the SCH16T-K01, a high-performance 6DOF sensor that integrates a 3-axis gyroscope and a 3-axis accelerometer from muRata. The board features a selectable measurement range for both sensors, low-pass...
mikroLab for AVR L is the go-to development solution for 64 and 100 pin AVR microcontrollers. The kit carries a BIGAVR6 board, a mikroC for AVR compiler license, an assortment of accessories, as well as a free license for Visual GLCD (valued at $99).
for Kinetis Capacitive FPI with frame Rapid development of multimedia and gui-centric applications BUILD GREAT GUI IN NO TIME Rich with peripherals Mikromedia 5 for Kinetis Capacitive FPI with frame is not limited to multimedia-based applications only. USB, WiFi and RF connectivity options, digital motion sensor, battery charging...
for STM32F2 CAPACITIVE FPI with frame Rapid development of multimedia and gui-centric applications BUILD GREAT GUI IN NO TIME Rich with peripherals Mikromedia 4 for STM32F2 CAPACITIVE FPI with frame is not limited to multimedia-based applications only. USB, digital motion sensor, battery charging functionality, SD card reader and much more...
eFuse 3 Click is a compact add-on board that contains an electronic eFuse. This board features the NIS6150, a resettable fuse that can significantly enhance the reliability of a USB application from both catastrophic and shutdown failures from onsemi. It is designed to buffer the load device from the excessive input voltage, which can damage sensitive...
SPI Isolator 6 Click is a compact add-on board representing a digital isolator optimized for a serial peripheral interface. This board features the MAX22345, a fast, low-power 4-channel digital galvanic isolator from Analog Devices. This device comes with a maximum data rate of 200Mbps and transfers digital signals between circuits with different power...
Rotary B 2 Click is a compact add-on board that allows you to add a precision input knob to your design. This board features the TLC5925, a low-power 16-channel constant-current LED sink driver from Texas Instruments that, combined with a high-quality rotary encoder from ALPS, the EC12D1564402, allows you to add a precision input knob to your design. It...
Grid-EYE 2 Click is a compact add-on board designed for thermal imaging and motion detection applications. This board features the AMG883543, an infrared array sensor from Panasonic with a 90° viewing angle and an 8x8 pixel matrix that measures temperatures from 0°C to 80°C with a resolution of 0.25°C. The sensor can detect objects up to 5 meters away and...
Brushless 18 Click is a compact add-on board that controls three-phase sensorless brushless DC (BLDC) motors. This board features the ATmega8A, an 8-bit microcontroller from Microchip, ensuring precise and efficient motor control. This board features six high-performance N-channel MOSFETs (STL120N4F6AG) for switching power from an external source to the...
Loading
Load more
Loading
