The LCD Adapter Board is an effective and low-cost board used to connect your development board or prototype device to an LCD. There is an IDC10 connector as well as a potentiometer for LCD contrast adjustment provided on the board.
The Serial 7-seg Display 2 Board enables you to use a 7-segment LED display. It features an on-board SPI interface, LED display driver MAX7219 and 8 common-cathode LED displays. The board is connected to a device via an on-board IDC10 connector.
The Serial 7-seg Display Board features an onboard SPI interfaced, LED display driver MAX7219 and 4 common-cathode LED displays. The board is connected to a prototype device via an IDC10 connector and comes with examples.
The Serial LCD Adapter Board is used to connect an LCD with your development board or prototype device via serial communication. It includes an on-board serial port expander MCP23S17 as well as a potentiometer used to adjust LCD contrast.
If you need more pins, GLCD or character LCD for your applications than the Serial LCD/GLCD Adapter Board is the best choice. It is connected to an LCD/GLCD via the on-board MCP23S17 serial port expander that uses SPI communication.
EasyTFT board is a perfect choice for users or mikroElektronika boards who want to upgrade their GLCD with TFT display. It features connector compatible with GLCD 128x64 connectors, as well as touch panel connectors.
mikroTFT is a breakout board for MI0283QT-9A 2.8" TFT color display with 320 x 240 pixel resolution, driven by ILI9341 display controller. TFT display is covered with a resistive touch panel which can be used as an input device.
The TFT - PROTO Board contains TFT Color Display MI0283QT-9A with 320x240px resolution which is driven by ILI9341 display controller. It also features a Touch Screen and therefore can be used as input device.
TFT Proto 4.3" carries a 480x272 ATO43B35 TFT screen covered with a 4-wire resistive touchscreen panel. To drive the 262k-color display, there's an SSD1963 graphic controller with a 8/9/16/24-bit MCU interface that includes a deep-sleep power saving.
TFT Proto 5" carries a 800x480 HT050AWV40T TFT screen covered with a 4-wire resistive touchscreen panel. To drive the 262k-color display, there's an SSD1963 graphic controller with a 8/9/16/24-bit MCU interface that includes a deep-sleep power saving mode.
TFT Proto 7" carries an 800x480 FRD070IF40-A TFT screen covered with a 4-wire resistive touchscreen panel.o drive the 262k-color display, there's an SSD1963 graphic controller with an 8/9/16/24-bit MCU interface.
ConnectEVE brings fast and visually stunning graphics even to 8-bit MCUs with little Flash and RAM. It’s state-of-the-art FT800 graphics controller integrates display, audio and touch onto a low cost, easy-to-use, single-chip solution.
TFT PROTO 5" Capacitive carries the 800x480 RVT50AQTNWC00 TFT screen. The SSD1963 display controller drives the TFT display, with a 1215K byte buffer that supports up to 864x480 at 24bpp displays.