how to use G540 programmer in AVR Flash

General discussion on mikroC PRO for AVR.
Post Reply
Author
Message
nauman_mrd
Posts: 8
Joined: 21 Jul 2013 13:02

how to use G540 programmer in AVR Flash

#1 Post by nauman_mrd » 24 Jul 2013 19:43

Hello

i am using Mikro C PRO for AVR but i don't know how to use my G540 Programmer with it. my USB G540 driver is installed but the USB icon in AVR Flash in disabled. and cant see anything in "Show Devices" under USB Menu. screen shots are attached.

My Questions are
1. How to use G540 programmer with AVR Flash ?
2. which USBASP can be used with AVR Flash ?

i have just found this usbasp programmer in google.
http://www.protostack.com/download/Users Guide (AC-PG-USBASP-UG-V1.2).pdf
Attachments
no usb.JPG
no usb.JPG (59.32 KiB) Viewed 2324 times
USB driver
USB driver
usb.JPG (53.69 KiB) Viewed 2324 times

User avatar
filip
mikroElektronika team
Posts: 11874
Joined: 25 Jan 2008 09:56

Re: how to use G540 programmer in AVR Flash

#2 Post by filip » 25 Jul 2013 12:16

Hi,

The AVRFlash application does not support the G540 programmer, it only supports the mikroElektronika AVR programmer :
http://www.mikroe.com/mikroprog/avr/

For G540 you should use an appropriate programmer application, recommended by the manufacturer usually.

Regards,
Filip.

nauman_mrd
Posts: 8
Joined: 21 Jul 2013 13:02

Re: how to use G540 programmer in AVR Flash

#3 Post by nauman_mrd » 27 Jul 2013 00:56

filip wrote:Hi,

The AVRFlash application does not support the G540 programmer, it only supports the mikroElektronika AVR programmer :
http://www.mikroe.com/mikroprog/avr/

For G540 you should use an appropriate programmer application, recommended by the manufacturer usually.

Regards,
Filip.

Ok thanks

Post Reply

Return to “mikroC PRO for AVR General”